Case carrier Lock it for Yamaha XSR 700 / XTribute (22-) Original Hepco & Becker

Made from 16mm steel tubing and custom laser cut parts that further reinforce the side case carrier in high stress areas. Each HEPCO & BECKER Lock-it side case carrier is precisely matched to the respective motorcycle type. This results in a very high fitting accuracy of the carrier on the motorcycle.
The carriers can be mounted and dismounted in seconds. You only have to loosen the attached Lock-it screws with a quarter turn and you can remove the side parts to the rear or side. As theft protection, you can optionally protect the carrier with the lockable Lock-it screws from thieves.
The screws can be found in the accessories.
All cases are locked with the help of a lock located on the case on the carrier. To do this, you need the lock adapters which are usually included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a mounting option for the retaining locks of the case.

• stable construction MADE IN GERMANY 
• quickly removable, only inconspicuous small tabs remain on the motorcycle 
• high quality surface finish 
• usually easy mounting, please refer to the deposited mounting instructions 
• if there are any restrictions, please refer to the vehicle specific notes or the mounting instructions 
• suitable for most Hepco&Becker hard shell side cases (please note model specific instructions) 
• Luggage systems generally do not require ABE or registration - Tube diameter: 16 mm

Scope of delivery: right + left incl. mounting material and mounting instructions
Recommended load: 10kg in each side case (Please note the model-specific notes, as well as the notes on the mounting instructions and motorcycle manufacturer-specific information for any restrictions that may occur)