Cover cap mirror hole / handlebar ends, black
Description
Product information
Cover caps cover the original mirror mount and protect it from corrosion and refine the look on the handlebar.
- black
- 2-piece
- Ø=30mm, thread M6
Manufacturer
SIP Style
|
SIP Scootershop GmbH |
Reviews 0
Login
Zubehör Artikel
If you don't like the original mirrors you can exchange them against the Handlebar end mirror mini exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. round Ø 82 mm Aluminum black Lever length 75mm Glass convex Mounting note for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Who does not like the original mirrors can replace them with Handlebar end mirror Ferrara 2 exchange. Due to the mostly narrow design, the overall width of the handlebars is not significantly widened, and a get through in traffic jams or city traffic is still no problem. The mirrors can be mounted either down or up. When mounting downward, the field of view to the rear is slightly better. For mounting, a mounting kit (see recommendation) is still needed. 122 x 85 mm Aluminum black anodized Lever length 115 mm E-mark on glass usable for left or right side Mounting note for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: To mount handlebar end mirrors, a mounting kit is required. This serves as a handlebar widening and is optionally available for mounting with or without handlebar end weights. (Part no. MV502950/ MV502952/ MV502953) Mounting note for Vespa ET/LX/LXV/S: For mounting you need a handle with "handlebar end opening" or cut open the original one. For closed handlebars you can use the mounting kit (part no. MV502952 / MV502953), for open handlebars you need the handlebar end weights (part no. MV161030 / MV161031). Tip: To close the original handlebar mirror mount, use the cover cap(part no. 40093110)
Zubehör Artikel
When installing handlebar end mirrors, the mirror holes in the handlebar cover should be sealed. The covers for the mirror hole offer an optimum solution for this. Chrome Pair Ø=30mm, M6 thread