Filter by motorcycle model:
The HIGHSIDER license plate holder AKRON-RS adapts perfectly to the lines of your bike through its design.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal mount for easy installation without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
"120" Original Yamaha Heated Grips
Heated grips as a replacement for the standard grips. Details: Fully integrated Warm hands even on cold days Equipped with a temperature control switch—three temperature settings available Optional programming of settings for each motorcycle or scooter Automatic shut-off function conserves battery power Includes control switch Handle length is 120 mm Compatible with the following models: XSR 900 GP (26-) X-MAX 300 (25-) N-MAX 125 (25-)
Pillion seat "Comfort" for Yamaha Ténéré 700 (19-24)
For those who travel in pairs, the Isotta comfort pillion seat for the Yamaha Ténéré 700 (2019-2024 models) was developed to offer the passenger maximum comfort - without compromising the look of the motorcycle or off-road performance. This seat features a higher profile compared to the original seat, which allows for a more natural, relaxed and stable seating position even on long rides. Thanks to the 100% Italian design, it blends seamlessly into the lines of the motorcycle and maintains a dynamic, sleek appearance - ideal for road and off-road use. Like all Isotta seats, this one is supplied as a complete unit in a plug & play version that can be fitted immediately without any modifications: simply replace the original seat and immediately enjoy a better riding experience. Made from high-quality, fully waterproof and wear-resistant materials, this seat is suitable for all weather conditions. Colors: Blue: black base with blue accents Red: black base with white and red details Black: all black design with gray accents
"Double seat" Black with white piping for Vespa GTS
Double seat for Vespa GTS in black leatherette with white piping. Fits from year of manufacture 2008 - 2013
'Comfort' extra-soft seat for the Yamaha Ténéré 700 (19-24) – Red
Enjoy every ride in maximum comfort thanks to the Isotta Extra Comfort rider’s seat, compatible with the Yamaha Ténéré 700 from 2019 to 2024. Designed for discerning riders, this upgraded version of our comfort seat features softer padding – ideal for long journeys or for a more relaxed riding experience, even on short trips. The ergonomics have been completely redesigned compared to the original seat: the rear section has been widened to provide better support, whilst the front section remains slim to allow for a natural leg position without restriction. The Isotta Extra Comfort seats are supplied as a complete unit in a plug-and-play version that can be fitted directly without any modifications: simply replace the original seat and ride off. Made from high-quality, fully waterproof materials, these seats offer durability and resilience in all weathers.Available in three colour options to match the look of your motorbike. Details: Extra-comfort padding: softer for maximum comfort Wider rear seat area, slimmer front section for optimum manoeuvrability Plug & Play installation: no modifications required 100% waterproof and weather-resistant
20 mm Handlebar Riser for Ténéré 700 (19-) Original
The handlebar riser offers easy adjustment for your Ténéré 700. It's easy to install, and you can easily adjust the handlebar height by 20 mm. Details: OEM quality and fit Comes as a pair Aluminum construction, WVTA-approved
ABS sensor protection for BMW R 1300 GS /Adventure
Protect the ABS wheel sensor on the front wheel of your BMW R 1300 GS /Adventure with this special solution. Specifically designed to fit your vehicle, this guard ensures that the sensor is protected from road debris and other elements that could affect its function. Made from high quality materials, this cover offers reliable robustness without compromising the appearance of your motorcycle. Installation is simple and intuitive for instant and long-lasting ABS protection that ensures your BMW R 1300 GS /Adventure stays in top shape on any on-road or off-road adventure. These items are 100% made in Italy by the best craftsmen of Motor Valley, synonymous with excellence in the motorcycle industry. This protection is made of Ergal, a material derived from aluminum that offers numerous advantages over traditional aluminum. Ergal is an alloy of 7075 aluminum known for its exceptional mechanical strength and lightness, making it ideal for applications that require high performance and durability. Details: Material: Ergal (aluminum 7075) Manufacture: CNC-milled from solid material 100 % made in Italy
ABS sensor protection gold for Moto Guzzi V100 Mandello S / Stelvio 2024
Protect the ABS sensor on your Moto Guzzi V100 Mandello S with this robust protector, specially designed to ensure its safety and longevity. Made from high-quality materials, this guard provides a reliable barrier against road debris, stones and other elements that could damage the sensor, protecting your motorcycle's ABS system and ensuring a smooth ride on rough roads or in difficult conditions. Easy to install and designed for a perfect fit for your Moto Guzzi model, this guard is an essential addition to keep your motorcycle in optimal condition and ensure your safety on the road.
Adapter cable accessory blinker for BMW
Adapter cable for accessory indicators to the original vehicle wiring harness. For various BMW vehicles. Supplied in pairs (2 pieces).
Adapter for lamp guard grille for Honda CRF 1100 Africa Twin Adventure Sports (20-23)
Details: Is required to fit the lamp guard if no tank guard is fitted. Lamp guard not included in the scope of delivery Color: black Weight: 0.8 kg Notes: Cannot be combined with original tank guard
Adapter for lamp guard grille for Honda CRF 1100L Africa Twin Adventure Sports (24-) Original Hepco
is required to mount the lamp protection grille if no tank protection bracket is mounted black Lamp guard not included in the scope of delivery
Adapter for lamp protection grille for Honda CRF 1100 Africa Twin (20-23) Hepco & Becker
Details: Is required to mount the lamp guard if no tank guard is mounted Lamp guard not included in the scope of delivery Weight: 1.0 kg Color: black Notes: Cannot be combined with original tank guard
Adapter for main stand in conjunction with: Arrow 2S001453
Adapter which enables the main stand Art. 2S001453 to be fitted when the Arrow silencer Art. 2S002010 is fitted to the V7 Stone or Special models.
Adapter for original Aprilia turn signal left
Adapter for original turn signal left for div. Aprilia models. Powder coated or KTL painted black.
Adapter for original Aprilia turn signal right
Adapter for original turn signal right for div. Aprilia models. Powder coated or KTL painted black.
Adapter for original Honda turn signal left
Adapter for original Honda turn signals left; e.g. CB650R and CBR650R; types: RH01, RH02, RH07 and RH08, color: black for indicator holder -KH10 and -KH15.
Adapter for original Honda turn signal right
Adapter for original Honda turn signals right; e.g. CB650R and CBR650R; types: RH01, RH02, RH07 and RH08, color: black for indicator holder -KH10 and -KH15.
Adapter for original Kawasaki blinker left license plate holder
Adapter for original indicators left, suitable for license plate holder for various Kawasaki models, material: 1.4301 (3.0mm) surface: KTL-coated color: black
Adapter for original Kawasaki blinker right license plate holder
Adapter for original blinker right, suitable for license plate holder for various Kawasaki models, material: 1.4301 (3.0mm) surface: KTL-coated color: black
