Easyrack top case carrier for original luggage rack for Honda CRF 1000 Africa Twin (18-19)

  Details:   Made from 1.5mm thick aluminum sheet, Absorbs impacts and ground contact Rounded edges, recessed lashing eyes Sturdy metal locks, integrated carrying handles Absolutely waterproof, no aluminum abrasion Suitable for a full-face helmet Extensive range of accessories available Fits all Hepco & Becker luggage racks, aluminum racks and Easyracks Only the model-specific top case carrier and the top case are required for mounting on the motorcycle. Scope of delivery: Topcase + key + lock cylinder External dimensions (HxWxD): 33 x 50 x 38 cm Internal dimensions (HxWxD): 31 x 40 x 34 cm Packing volume: 45 liters Weight: 5.0 kg

  Details: Made of 1.5mm thick aluminium sheet, silver anodized High impact resistant molded plastic parts  Absorbs impacts and ground contact  Rounded impact edges  Recessed lashing eyes  Sturdy metal locks  Integrated carrying handles  Absolutely waterproof  No aluminum abrasion  Suitable for two helmets  Extensive range of accessories available  Suitable for model-specific Hepco & Becker tubular luggage racks, Alurack or Easyrack top case carriers. (For any restrictions, please refer to the model-specific information provided with the carrier and the fitting instructions) Only the model-specific top case carrier and the top case are required for mounting on the motorcycle.  Lockable top case Scope of delivery: Topcase + key + lock cylinder Packing volume: 58 liters External dimensions (HxWxD): 31 x 62 x 37.5 cm Internal dimensions (HxWxD): 31 x 54.5 x 34 cm Weight: 6.1 kg Material: Aluminum/polycarbonate/polybutylene terephthalate

Waterproof and suitable for 1-2 helmets. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. Version: black with silver cover and clear reflector. suitable for 1-2 helmets (depending on size) Suitable for model-specific Hepco & Becker tubular luggage racks, aluminum racks or Easyracks waterproof thanks to special seal Optional railing, back padding or inner pocket available incl. Key and lock cylinder Case shell made of highly impact-resistant plastic Volume / dimensions: Contents: 48 liters Weight: 5.3 kg Dimensions HxWxD 34x56x44 cm

Waterproof and suitable for two helmets. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. An undisputed best seller for many years and always at the top in various comparative tests. The " Junior Flash " case series. No matter which version or size you choose: you are sure to find what you are looking for! The Junior is robust, highly resilient and, thanks to its double walls, forgives a rough landing on the ground. The contents are optimally protected even in the case of small bumps. The watertightness is given at all times. The large case opening makes it easy to use every last corner of the contents optimally. Removable panels available in the colors silver and black or there is the option to paint the panels to match the vehicle color. offers storage space of 55 liters for 2 full-face helmets and more Absolutely watertight thanks to a special seal. with floor mat and small document pocket. Highly impact-resistant plastic shells for absolute robustness. aerodynamic design. Inner pockets, back padding and railing available as accessories incl. Key and cylinder Suitable for all H&B topcase carriers (tubular luggage racks, aluminum racks and easy racks) Recommended load 5kg: please note the information on the respective model-specific carrier Volume / Dimensions : Contents: 55 liters Weight 5.8 kg Dimensions HxWxD: 31x58x47 cm div >

  Details: Completely waterproof thanks to a specially bonded seal  Made from 1.5 mm thick powder-coated aluminium sheet  Lid opens on both sides  Lid is fully removable  Highly impact-resistant plastic components  Includes a luggage net on the inside of the lid  Includes key and lock cylinder  Suitable for all Hepco&Becker Alurack, Easyrack or tubular top case carriers (please refer to the individual model-specific carriers for any restrictions)  Storage space for one helmet Recommended load capacity: 5 kg (Please observe the carrier’s vehicle-specific instructions, as well as the motorbike manufacturer’s specifications regarding restrictions) Material: aluminium/polycarbonate/polybutylene terephthalate External dimensions (H x W x D): 33 x 50 x 39 cm Internal dimensions (H x W x D): 30 x 42 x 32 cm Weight: 5.2 kg

Waterproof and suitable for a helmet. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. The timeless classic: modern design paired with consistent quality and well thought-out details. No matter from which side you look at your motorcycle: the series JOURNEY-Topcases with its aerodynamic design developed by Target-Design ensures a lively appearance and a safe ride. The Journey series offers sufficient storage space for long tours and remains waterproof thanks to the special seals. Unique: the integrated bumper strip protects the case from small bumps and falls. The case shell is made of high-quality, impact-resistant plastic, double-walled. A tried and tested product - already the test winner in issue 18 of “Motorrad” magazine in 2000, and since then it has been improved in detail. Several years in the range and still very up-to-date. Removable panels available in the colors silver, anthracite, black and white or there is the option to paint the panels to match the vehicle color. suitable for a helmet and more Fits on Hepco & Becker tubular luggage racks, aluminum racks, or Easyrack 42 ltr. Content incl. Key and lock cylinder waterproof thanks to special seal can be delivered with the same key to already existing cases. Please enter the key number in the comment field at the end of the order process. Back padding, inner pocket or railing optionally available Volume / dimensions: Contents: 42 liters Weight 4.8 kg Dimensions HxWxD: 33.5x55x422 cm

Waterproof and suitable for a helmet. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. Absolutely watertight thanks to special seal High-impact plastic trays Extremely stable metal locks, ergonomic handle Aerodynamic design Inner pockets and railing available as accessories Suitable for all H&B topcase racks (luggage racks, aluminum racks and easy racks). suitable for a helmet recommended payload; 5kg Volume / Dimensions : Contents: 40 liters Weight 4.4 kg Dimensions HBxHxD: 45 x 26 x 38 cm

  Details: Can be used optionally for high loads on the Alurack, Easyrack and widening Is connected to the side case carrier If no side case carrier is fitted, you also need the retaining set Weight: 0.6 kg Notes: Installation only possible in conjunction with side case carrier, otherwise article 42269940001 (retaining set for support strut) is required.

  high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW  

For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.

  Only suitable for very small helmets. Most modern full-face helmets etc. do not fit. (too high) Standard metal railing for carrying the top case or for lashing additional light luggage to the top case Special double-walled shell  Made of highly impact-resistant, through-dyed, blown plastic Absolutely watertight thanks to special seal in the lid Extremely sturdy metal locks incl. key and locking cylinder Case and top case available with the same key: please specify the desired key number when ordering Extensive range of accessories available Fits almost all Hepco & Becker top case carriers (tubular luggage rack top case carrier, Alurack top case carrier and Easyrack top case carrier) Please note the model-specific information on the carriers for any restrictions that may apply. The top case is pushed onto the respective carrier and secured using a retaining lock included in the scope of delivery. No further adapters required. Recommended load: 3-5kg in the top case (please observe the model-specific information on the carrier and motorcycle manufacturer-specific information) External dimensions (HxWxD): 31 x 46 x 37 cm Internal dimensions (HxWxD): 24.5 x 39 x 30 cm Material: Polypropylene Weight: 6 kg

Waterproof and suitable for a helmet. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. Version: black with silver cover and clear reflector Waterproof thanks to special seal Case shell made of high-impact plastic Extensive range of accessories available suitable for a helmet Can be mounted on Hepco & Becker tubular luggage bridges, Easyracks and Aluracks Recommended load: 5kg incl. Lock cylinder and key Volume / dimensions: Contents: 38 liters Weight 4.9 kg Dimensions HxWxD: 32x48x42 cm

  Details:   Made from 1.5mm thick aluminum sheet, Absorbs impacts and ground contact Rounded edges, recessed lashing eyes Sturdy metal locks, integrated carrying handles Absolutely waterproof, no aluminum abrasion Suitable for a full-face helmet Extensive range of accessories available Fits all Hepco & Becker luggage racks, aluminum racks and Easyracks Only the model-specific top case carrier and the top case are required for mounting on the motorcycle. Scope of delivery: Topcase + key + lock cylinder External dimensions (HxWxD): 33 x 50 x 38 cm Internal dimensions (HxWxD): 31 x 40 x 34 cm Packing volume: 45 liters Weight 5.5 kg

  Details: Made from 1.5mm thick aluminum sheet  High impact resistant molded plastic parts  Absorbs impacts and ground contact  Rounded impact edges  Recessed lashing eyes  Sturdy metal locks  Integrated carrying handles  Absolutely waterproof  No aluminum abrasion  Suitable for two helmets  Extensive range of accessories available  Suitable for model-specific Hepco & Becker tubular luggage racks, Alurack or Easyrack top case carriers. (For any restrictions, please refer to the model-specific information provided with the carrier and the installation instructions) Only the model-specific top case carrier and the top case are required for mounting on the motorcycle.  Lockable top case Scope of delivery: Topcase + key + lock cylinder Packing volume: 58 liters External dimensions (HxWxD): 31 x 62 x 37.5 cm Internal dimensions (HxWxD): 31 x 54.5 x 34 cm Weight: 6.1 kg Material: Aluminum/polycarbonate/polybutylene terephthalate

Waterproof and suitable for 1-2 helmets. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. Version: black with red reflector. suitable for 1-2 helmets (depending on size) Suitable for model-specific Hepco & Becker tubular luggage racks, aluminum racks or Easyracks waterproof thanks to special seal Optional railing, back padding or inner pocket available incl. Key and lock cylinder Case shell made of highly impact-resistant plastic Volume / dimensions: Contents: 48 liters Weight: 5.3 kg Dimensions HxWxD 34x56x44 cm

Waterproof and suitable for two helmets. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. An undisputed best seller for many years and always at the top in various comparative tests. The " Junior " case series. No matter which version or size you choose: you are sure to find what you are looking for! The Junior is robust, highly resilient and, thanks to its double walls, forgives a rough landing on the ground. The contents are optimally protected even in the case of small bumps. The watertightness is given at all times. The large case opening makes it easy to use every last corner of the contents optimally. offers storage space of 55 liters for 2 full-face helmets and more Absolutely watertight thanks to a special seal. with floor mat and small document pocket. Highly impact-resistant plastic shells for absolute robustness. aerodynamic design. Inner pockets, back padding and railing available as accessories incl. Key and cylinder Suitable for all H&B topcase carriers (tubular luggage racks, aluminum racks and easy racks) Recommended load 5kg: please note the information on the respective model-specific carrier Volume / Dimensions : Contents: 55 liters Weight 5.8 kg Dimensions HxWxD: 31x58x47 cm div >

  Details: Completely waterproof thanks to a specially bonded seal  Made from 1.5 mm thick powder-coated aluminium sheet  Lid opens on both sides  Lid is fully removable  Highly impact-resistant plastic components  Includes a luggage net on the inside of the lid  Includes key and lock cylinder  Suitable for all Hepco&Becker Alurack, Easyrack or tubular top case racks (please refer to the individual model-specific racks for restrictions)  Storage space for one helmet Recommended load capacity: 5 kg (Please note the carrier’s vehicle-specific instructions, as well as the motorbike manufacturer’s specifications regarding restrictions) Material: aluminium/polycarbonate/polybutylene terephthalate External dimensions (H x W x D): 33 x 50 x 39 cm Internal dimensions (H x W x D): 30 x 42 x 32 cm Weight: 5.2 kg

Waterproof and suitable for a helmet. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. Version: black with red reflector Waterproof thanks to special seal Case shell made of high-impact plastic Extensive range of accessories available suitable for a helmet Can be mounted on Hepco & Becker tubular luggage bridges, Easyracks and Aluracks Recommended load: 5kg incl. Lock cylinder and key Volume / dimensions: Contents: 38 liters Weight 4.9 kg Dimensions HxWxD: 32x48x42 cm

Waterproof and suitable for two helmets. For mounting on Hepco & Becker aluminum racks, Easyrack and tubular luggage racks suitable for top cases. suitable for 2 helmets Suitable for model-specific Hepco & Becker tubular luggage racks, aluminum racks or Easyracks incl. Key and lock cylinder can be delivered with the desired lock to match existing cases. Simply enter the lock number in the comment field at the end of the order process. waterproof thanks to special seal high-impact plastic Optional railing, back padding or inner pocket available Removable panels available in the colors silver, anthracite and black or there is the option to paint the panels in the vehicle color. Volume / Dimensions: Contents: 52 liters Weight: 4.8 kg Dimensions WxHxD: 58 x 35 x 46 cm