Handlebar riser H=30 mm with offset 21 mm back for Honda VFR 800 X Crossrunner (15-20)
At least 2 years statutory warranty | Show EU notice
Description
Product information
With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorcycle to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorcycle.
Features:
Simple installation
TÜV-tested and incl. ABE (registration-free)
High quality
Different versions depending on model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebar for use with original upper clamp; handlebar risers with lower and upper clamps
Handlebar diameter: 28.6 mm
Weight: 0.58 kg
Recommendation:
Universal adapter 30mm (Art. 4230-MT111-BL) for extending the brake and clutch line
Model-specific Notes:
The length of the cables and lines must be checked individually and extended if necessary
Not compatible with Hepco & Becker grip protection
Identical in construction to handl
| Accessories category: | Handlebars & Mirrors |
|---|---|
| Motorcycle Brand: | Honda |
| Honda |
800 VFR 800 X Crossrunner 2015-2020 (RC80, RC94)
|
|---|
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Accessory Items
This adapter is used to extend hydraulic brake lines or clutch lines by 3 cm.Scope of delivery: 1x adapter, 4x seals, 1x banjo boltColor: blackWeight: 0.04 kg
high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW
For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.
