HIGHSIDER pro CB1 DRL Control Box Switchable daytime running light
Article number:
BI-1107969
Manufacturer:
Highsider
Description
Product information
HIGHSIDER DRL CONTROL- BOX CB1
Daytime running light control box for vehicles without light switch
Installing the DRL CONTROL- BOX CB1 ensures correct switching between the daytime running lights and the lights at the front of the vehicle. According to regulations, the daytime running lights must be connected in such a way that they go out automatically when the main headlights are switched on. As the main headlights are always on in vehicles without a light switch, the daytime running light function cannot be used correctly. The BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle electrics. The parking light function, which is switched via the ignition lock when the vehicle is parked, is fully functional.
Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.
Dimensions
Length: 48 mm
Width: 28 mm
Height: 14 mm
Assignment:
IN (vehicle electrics):
Yellow = high beam (+)
Blue = low beam (+) ON / OFF switch between
White = parking light (+)
Red = ignition 15 (+)
Black = earth (-)
OUT (headlights)
Yellow = high beam (+)
Blue = low beam (+)
Black = earth (-)
To the daytime running light:
White = parking light (+)
Red = daytime running light (+)
Scope of delivery: 1 piece
Optional accessories:
Light switch on/off
NOTE:
A separate ON and OFF switch is also required for the DRL CONTROL-BOX (not included).
The rear tail light must always remain switched on, i.e. set to ignition plus.
If this product, in conjunction with the TYPE 6 headlight, does not switch on the daytime running light after starting the engine, please proceed as follows:
Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.
Tip:
You can find an installation tutorial on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=XC85w-0orc8
Daytime running light control box for vehicles without light switch
Installing the DRL CONTROL- BOX CB1 ensures correct switching between the daytime running lights and the lights at the front of the vehicle. According to regulations, the daytime running lights must be connected in such a way that they go out automatically when the main headlights are switched on. As the main headlights are always on in vehicles without a light switch, the daytime running light function cannot be used correctly. The BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle electrics. The parking light function, which is switched via the ignition lock when the vehicle is parked, is fully functional.
Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.
Dimensions
Length: 48 mm
Width: 28 mm
Height: 14 mm
Assignment:
IN (vehicle electrics):
Yellow = high beam (+)
Blue = low beam (+) ON / OFF switch between
White = parking light (+)
Red = ignition 15 (+)
Black = earth (-)
OUT (headlights)
Yellow = high beam (+)
Blue = low beam (+)
Black = earth (-)
To the daytime running light:
White = parking light (+)
Red = daytime running light (+)
Scope of delivery: 1 piece
Optional accessories:
Light switch on/off
NOTE:
A separate ON and OFF switch is also required for the DRL CONTROL-BOX (not included).
The rear tail light must always remain switched on, i.e. set to ignition plus.
If this product, in conjunction with the TYPE 6 headlight, does not switch on the daytime running light after starting the engine, please proceed as follows:
Install the enclosed 120 Ohm resistor as specified in the instructions. The headlight should now also switch on the daytime running light.
Tip:
You can find an installation tutorial on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=XC85w-0orc8
Manufacturer
Highsider
|
Paaschburg & Wunderlich GmbH |
Reviews 0
Login
No reviews found. Share your insights with others.