HIGHSIDER pro distance bar black set 35mm
Article number:
BI-1140841
Manufacturer:
Highsider
Description
Product information
Handlebar spacers for Ø 22.2mm handlebar diameter available in various colors and heights.
Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.
Delivery includes the required longer screws.
ATTENTION IMPORTANT NOTE:
Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!
There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.
The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.
The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.
Raising the original handlebar can also lead to additional modifications to the vehicle.
Check whether the following requirements apply to your vehicle (-see ABE):
- use permitted when using a compensation pad for the fork bridge
- use permitted with 20 mm longer brake line
- use permitted with 30 mm longer brake line
Failure to comply will invalidate the operating license for the vehicle!
Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.
Delivery includes the required longer screws.
ATTENTION IMPORTANT NOTE:
Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!
There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.
The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.
The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.
Raising the original handlebar can also lead to additional modifications to the vehicle.
Check whether the following requirements apply to your vehicle (-see ABE):
- use permitted when using a compensation pad for the fork bridge
- use permitted with 20 mm longer brake line
- use permitted with 30 mm longer brake line
Failure to comply will invalidate the operating license for the vehicle!
| Honda |
500 CB 500 F 2013-2015 (PC45)
|
|---|---|
| Kawasaki |
400 Z 400 2019-2020 (ER400D)
400 Z 400 2023 (ER400F)
500 Eliminator 500 2024- (EL450AAD)
800 W 800 2010-2017 (EJ800A)
800 Z 800 /e 2013-2016 (ZR800A/B/C/D)
|
| Suzuki |
650 DL 650 V-Strom /XT 2012-2016 (C7, C71111, C72111, C71121, C72121)
650 DL 650 V-Strom /XT 2017-2024 (C7, C733A, C743F)
|
| Yamaha |
600 FZ 6 /S2 2007-2010 (RJ14)
600 FZ 6 Fazer / S2 2007-2010 (RJ14)
|
Manufacturer
Highsider
|
Paaschburg & Wunderlich GmbH |
Reviews 0
Login
No reviews found. Share your insights with others.