HIGHSIDER pro Flat Track handlebars steel chrome
HIGHSIDER
Article number:
BI-1140752
Manufacturer:
HIGHSIDER
Description
Product information
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip area
HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.
The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.
The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.
The surface is high-gloss polished and chrome-plated or black KTL-coated.
The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.
All HIGHSIDER pro handlebars are supplied with an ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved on the motorcycle.
As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
Therefore, take a look at the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.
Scope of delivery: 1 piece
Care instructions:
- Only use acid and alkali-free cleaner on all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.
- Test the compatibility of cleaning agents in an inconspicuous area before use!
- No guarantee or warranty is given in the event of improper cleaning and care.
HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.
The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.
The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.
The surface is high-gloss polished and chrome-plated or black KTL-coated.
The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.
All HIGHSIDER pro handlebars are supplied with an ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved on the motorcycle.
As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
Therefore, take a look at the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.
Scope of delivery: 1 piece
Care instructions:
- Only use acid and alkali-free cleaner on all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.
- Test the compatibility of cleaning agents in an inconspicuous area before use!
- No guarantee or warranty is given in the event of improper cleaning and care.
| Honda |
1100 VT 1100 C2 Shadow ACE 1995-2000 (SC32)
1800 VTX 1800 2001-2006 (SC46)
750 VT 750 C Shadow 2004-2016 (RC50)
750 VT 750 DC Black Widow 2000-2003 (RC48)
|
|---|---|
| Indian |
1000 Scout Sixty /Classic 2016-
1133 Scout 2015-2023 (M)
|
| Kawasaki |
650 W 650 1998-2006 (EJ650AA, EJ650AC)
|
| Suzuki |
1500 VL 1500 Intruder LC 1998-2004 (AL, AL1211, AL2111)
600 VS 600 Intruder 1995-1997 (VN51B)
800 VL 800 Intruder Volusia LC 2001-2005 (BM)
800 VS 800 Intruder 1992-2000 (VS52B)
|
| Triumph |
1200 Bonneville Bobber /Black 1200 2017- (DV01, DX04)
800 Bonneville 800 /T100 2001-2006 (908MD)
|
| Yamaha |
1100 XVS 1100 Drag Star 1999-2002 (VP05, 5EL, 5PB)
1100 XVS 1100 Drag Star Classic 2000-2007 (VP05, VP16, 5KS, 5YS)
1600 XV 1600 Wild Star 1999-2004 (VP08, 5JA)
1900 XV 1900 Midnight Star 2006-2016 (VP23, 5C4, 1CR)
650 XVS 650 Drag Star 1997-2003 (4VR, 4XR, VM03)
650 XVS 650 Drag Star Classic 1998-2007 (VM02, 5BN, VM03, 5SC, VM04, 4C5)
950 SCR 950 2017-2020 (VN07, BL34)
950 XV 950 Bolt /R 2014-2020 (VN03, 2DE, 1XC, 2DX, VN07, BS5)
950 XVS 950 A Midnight Star 2009-2015 (VN02, 26P)
|
Reviews 0
Login
No reviews found. Share your insights with others.