Kit 12 plastic parts for luggage carrier eyelets

  A steel luggage rack with double anti-rust treatment. The design has been developed both for use as a classic luggage rack to attach a rucksack or bag with the corresponding eyelets on the edge, and for mounting a top case with a corresponding plate (item not included). There are also pre-assembled plastic parts in the fastening holes for the straps to prevent the straps from rubbing during use. The luggage carrier consists of side brackets and a luggage plate. Handles (not included) can also be attached to the side brackets. Details: Simple installation - no drilling required Material: steel Treatment: Textured black lacquer finish Thickness: 2 mm Weight: 1.6 kg Maximum load capacity for safe driving: 3.5 kg Recommendations: It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.: AC1186) Luggage net available separately (Isotta art. no.: AC06)

Made of magnesium-aluminum and painted black textured (slightly rough to the touch). Indispensable for those who need extra loading volume when traveling. They are attached to the back of the cases (no drilling required) and allow easy opening and closing of the cases. The racks remain attached to the panniers even if you decide to remove them from the bike. Pre-assembled plastic inserts are also included in the mounting holes to prevent abrasion to the straps. Product features: Only compatible with Urban cases Dimensions (height 380 mm x width 245 mm) Do not interfere with opening Easy installation - no need to drill through the cases Material: aluminum Surface treatment: black powder-coated MOUNTING WITHOUT DRILLING THE ORIGINAL CASES

  This rack has unique features compared to all the competition. Made of sturdy steel and painted black, it offers a more economical solution than Isotta rack PP18, which is made of aluminum. It has cut-resistant straps in the holes and the front part matches the color of the red bag release button. The central part of the rack has a sliding device to facilitate opening and closing and to prevent scratching the plastic of the case. At the bottom there are four natural rubber shock absorbers to cushion excessive loads on unpaved roads; an innovative patented system designed to avoid stressing the attachments of the bag support. The paint finish is a highly resistant powder coating, and on top we still have anti-friction caps to avoid damaging the bottom of the bag. Details: Only compatible with VARIO cases Does not interfere with the opening of the cases Easy to install - no need to drill holes Material: steel Total weight of the product including mounting bracket: 1.3 kg  Notes:  The permissible safety load should not exceed the weight specified in the bags (weight in the bag + weight loaded on the carrier). It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.:AC1186) Luggage net available separately (Isotta Art.No.:AC06)

Made from high quality clear PMMA that retains its brilliance over time. The thick metal brackets feature a double anti-corrosion treatment and a black textured paint finish (slightly rough to the touch). With impressive aesthetics and important technical details to meet the needs of motorcyclists, the rack can be moved forwards and backwards to allow or prevent the passenger seat from being fitted. The six slots on the rack allow a bag or rucksack to be securely attached. In addition, pre-mounted plastic inserts are included in the mounting holes to prevent damage to the straps when they are in use. These plastic inserts are available in different colors (AC1186). The world's first luggage carrier with even weight distribution. Details: Material: PMMA Thickness: 10 mm Easy to fit Color: lightly tinted Maximum load for safe driving: 3.5 kg  

  This carrier offers unique features compared to the competition. First of all, it is extremely light, as it is made of magnesium and aluminum alloy. It has cut-resistant tabs at the attachment points and the front part is in the same color as the red release button of the bag. The central part of the carrier has a sliding rail to make it easier to open and close and to prevent scratches to the plastic of the case. 4 rubber shock absorbers are fitted to the underside to cushion excessive loads on unpaved roads. This innovative patented system is designed to reduce stress on the bag mount. The surface is finished with a durable powder coating and additional non-slip caps are fitted to protect the bottom of the bag. Details: Only compatible with VARIO cases Does not interfere with the opening of the cases Easy to install - no need to drill holes Material: aluminum Coating: black with textured look Total weight of the product including mounting bracket: 1.3 kg Notes:  The permissible safety load should not exceed the weight specified in the bags (weight in the bag + weight loaded on the carrier). It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.: AC1186) Luggage net available separately (Isotta Art.No.: AC06)

  This rear luggage rack for the Yamaha Tracer 700 has been designed to support the sporty lines of the Tracer while providing convenience and carrying capacity without compromising on looks. The luggage rack is made of textured black magnesium aluminum and is attached to two robust brackets that follow the design of the seat. The angle of the carrier can be adjusted to suit the needs and preferences of the rider. There are eight slots that allow the secure attachment of a bag or rucksack with straps or elastic bands (not included). Technical features: Material: AluminumCoating: PaintedColor: Textured blackMaximum load for safe riding: 3.5 kgThickness: 4 mm

  Isotta has developed for the first time rear luggage racks without welds and without the need to DRILL HOLES INTO THE ORIGINAL CASES. In fact, all competition racks are fixed to the top case by drilling holes to hold it in place, which can weaken the case and over time can lead to cracks and therefore damage to the top case or side bags. Isotta System eliminates this problem by offering a clean, innovative design and, like all our products, is minimalist. The design matches the style of the motorcycle and allows a small bag or backpack to be loaded, which can be secured with straps or elastic bands in the slots provided. There are also pre-mounted plastic inserts in the slots to prevent abrasion to the straps when in use. Additional luggage carriers for the original BMW side cases are also recommended, also made of aluminum and they do not require drilling (available separately Art. No.: PP14-ALL). Non-slip transparent stickers are included in both models. Details: Material: Aluminum Treatment: painted in textured black Quick and easy to mount NO NEED TO DRILL THROUGH THE TOPCASE Weight including mounting brackets: 1 kg Recommendations: It is recommended to use the customized soft bag (Art.No.: BM-PP11) for this item. It is possible to change the color of the plastic inserts in the strap mounting holes (Art.No.: AC1186) Luggage net available separately (item no.: AC06)  Note: The total load (original bag + bag over the luggage carrier) must not exceed the weight specified in the original BMW bags.

  This innovative ISOTTA luggage rack was developed to be mounted over the original aluminum cases of the Moto Guzzi (Touring Pack) and offers the possibility to increase the load capacity WITHOUT DRILLING THE CASE, while maintaining the simple and elegant design. Installation is simple using the fastenings on the case, without the need to drill holes. The luggage carrier is made of a magnesium-aluminum alloy and has a textured, slightly rough black protective coating. Convenient openings allow you to attach a bag or pouch. Details: Thickness: 3 mm Easy mounting without drilling the cases Material: Magnesium-aluminum alloy Textured black paint (slightly rough to the touch) Compatible with the Moto Guzzi Touring Pack cases Isotta quality 100% Made in Italy  

  This rack has unique features compared to all the competition. First of all, it is extremely light as it is made of a magnesium-aluminum alloy and the plates are made of high quality Italian or German steel. It is sold as a pair and mounts to the original Moto Guzzi side cases, greatly increasing the load capacity when traveling, all without drilling through the original cases! It has practical loops that allow a bag or pouch to be attached. Highly recommended for traveling couples.  

  This carrier offers unique features compared to the competition. First of all, it is extremely light as it is made of magnesium and aluminum alloy. It has cut-resistant tabs at the attachment points and the front part is the same color as the bag's red release button. The middle part of the carrier has a sliding rail to facilitate opening and closing and to prevent scratches on the plastic of the case. There are 4 rubber shock absorbers on the underside to cushion excessive loads on unpaved roads. This innovative patented system is designed to reduce stress on the bag mount. The surface is finished with a durable powder coating and additional non-slip caps are fitted to protect the bottom of the bag. Details: Only compatible with VARIO cases Does not interfere with the opening of the cases Easy to install - no need to drill holes Material: aluminum Coating: black with textured look Total weight of the product including mounting bracket: 1.3 kg   Notes:    The permissible safety load should not exceed the weight specified in the bags (weight in the bag + weight loaded on the carrier) It is possible to change the color of the plastic parts in the belt bushings (Isotta Art.No.: AC1186) Luggage net available separately (Isotta art. no.: AC06)    

  Luggage carrier made of steel with double rust protection. The design is conceived both for use as a conventional luggage rack to attach a rucksack or bag using the eyelets provided on the edge, and for mounting a top case with a corresponding plate (not included). Plastics are also included in the pre-mounted holes for the straps to prevent abrasion on the straps. Product features: Easy to mount - no drilling required Material: iron Treatment: painted in textured black color WEIGHT of the carrier --> 1.6 kg  

  The aluminum luggage rack for the Yamaha Tenere 700 (2020>) is an accessory designed to meet the needs of those looking for a robust and functional product for transporting equipment during motorcycle trips and tours. Made of high quality aluminum with a thickness of 4 mm, this luggage rack has been designed to offer maximum strength and durability without compromising the low weight of the vehicle. Its structure is perfectly compatible with the Yamaha Tenere 700 and follows the lines and features of the motorcycle to ensure perfect integration that does not compromise the design and handling of the vehicle. The installation of the luggage rack is simple and quick, thanks to a design that allows assembly without complicated modifications. The aluminum material makes it resistant to the elements and the stresses of off-road use, ensuring high performance even in extreme conditions. Ideal for those who need a safe and reliable support for transporting luggage or equipment on long journeys or off-road tours, the rack offers excellent load capacity while maintaining the stability and safety of the motorcycle. Details: Thickness: 4 mm Material: Aluminum Isotta quality 100 % Made in Italy Handles included