Pulley for Vespa GTS/GTS Super/GTV/GT 60/ 250-300ccm
Description
Product information
for Vespa GTS Super/GTV/GT 60 250-300ccm / also fits for PIAGGIO Quasar 250-300ccm 4T LC
pulley by ZELIONI. The flank angle differs significantly from the original and ensures better acceleration and a performance-optimized drive with better power transmission. The modified fan blades reduce the temperature in the entire drive (Vario and clutch). This reduces wear on the V-belt.
- Aluminum CNC
Measured values at the same load/speed:
- Original pulley: 70°
- ZELIONI pulley: 59°
Installation instructions: When used in combination with the ZELIONI variator, only the standard installed PIAGGIO spacer between belt pulley and variator.
Important: Due to the changed flank angle, the belt pulley can only be installed in conjunction with the slightly shorter V-belt of the LEADER 125-200 engines (item no. P248052 / R163750660 / M6112854). Otherwise it rubs against the motor housing. We also recommend the ZELIONI variator (Item no. ZELVGT30).
Manufacturer
Zelioni
|
Hersteller: Zelioni (Taipei, Taiwan) EU-Importeur: SIP Scootershop GmbH |
Reviews 0
Login
Accessory Items
for Vespa GTS Super/GTV/GT 60/GT/ 250-300ccm / fits also for PIAGGIO Leader/Quasar 250-300ccm 4T LC A small but extremely fine tuning part in the scooter area is the variator, because it is the heart of the drive of every automatic scooter. The installation of an optimized variator thus determines not only the acceleration and traction, but also the smoothness of a vehicle. The mandatory program for all 2-/4- stroke pilots! The ZELIONI variator was developed especially for weight and wheel size of the Vespa GTS/GT models. High-precision CNC manufacturing of the tracks with precisely calculated pitch angle for optimum acceleration and maximum top speed. Vario back pressure spring, different vario weights and spacers are included. 20x17 mm Assembly note: The ZELIONI Vario can only be installed with the enclosed vario rollers. (no Dr. Pulley etc. rollers/gliders). The tensioning pulley between variator and clutch can be omitted. The following setUp of the vario is recommended: for Vespa GTS250: 6x14gr rollers for Vespa GTS300: 3x14gr, 3x16gr, for maximum acceleration 6x16gr, for long distances.
