Rider backrest with padding black for Honda CMX 500 Rebel (17-)
At least 2 years statutory warranty | Show EU notice
Description
Product information
Details:
- Incl. mounting material and mounting instructions
- Entry in the vehicle documents is not required
- Color: black
- Weight: 0.8 kg
| Accessories category: | Benches |
|---|---|
| Motorcycle Brand: | Honda |
| Honda |
500 CMX 500 Rebel 2017-2020 (PC56)
500 CMX 500 Rebel 2020- (PC56)
|
|---|
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Accessory Items
Hepco & Becker attaches great importance to material quality and workmanship, so that the LEGASY bag collection lives up to its name. However, the lifespan of any product also depends on proper care. The material mix of linen and leather requires special care in order to enjoy the product for a long time. Tips for cleaning: Only hand washing with lukewarm water and a detergent suitable for the material is recommended. It is better to maintain often and with little detergent than rarely with a lot of detergent. A soft brush and clear water are helpful for coarse dirt. We recommend lukewarm soapy water to clean the inner lining. Then squeeze it out carefully with a sponge with clear water. Dry products at room temperature. Warning: Do not wash or spin-dry in the washing machine. Incorrect cleaning can result in loss of color and / or feel.
high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW
For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.
