Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black matt
Description
Product information
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal grey areas, no more arguments with the TÜV inspectors - install the rims and the legal conversion to 13" is done. Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production.
- front/rear
- 3.00 -13"
- 10 spokes
- Aluminum
- black matt
- for rear additional mounting kit is needed
- with ABE
- KBA 53352
The rim is approved for the following tire sizes:
- Tire size front: 110/70-13 in combination with
- Tire size rear: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-1
- Tire size front: 120/70-13 in combination with
- Rear tire size: 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13
- Tire size front: 130/60-13 in combination with
- Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13
- Tire size front: 130/70-13 in combination with
- Rear tire size: 130/70-13 ww. 140/60-13
- Tire size front: 140/60-13 in combination with
- Rear tire size: 140/60-13
When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle.
Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed
Mounting instructions:
- Front wheel: plug & play. No additional mounting kit is required.
- Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required.
- For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately.
- After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Manufacturer
SIP Style
|
SIP Scootershop GmbH |
Reviews 0
Login
Zubehör Artikel
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC red anodized
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC silver anodized
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC black anodized
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC orange matt anodized
When converting the GTS models to the 13" MP3 rims, complications usually arise at the rear wheel. The standard bushing on the drive shaft between wheel hub and rim is not compatible with the front wheel rim of the PIAGGIO MP3. The only thing that helps is turning off the original bushing. Who wants to save the time or has no possibility to work on this bushing professionally, should fall back on the SIP bushing. This is exactly adapted to the required diameter and can be mounted plug & play. Simply replaced by the original rear wheel bushing, the new rear wheel can be mounted immediately. When mounting the SIP rims 12 "/ 13 "this bushing is also needed on the rear wheel.
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC gray matt anodized
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC chrome
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC black matt anodized
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC silver matt anodized
Tires often lose air because the valve inserts are defective. Be it due to age or improper handling. Therefore, who replaces more often times, drives further ... TR412
On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC blue matt anodized
for Vespa for Vespa GTS/GTS Super/GTV 125-300cc ('14-) For models that are equipped with ABS on the rear wheel as standard, the change to rims from the accessories has always been difficult, often there were problems with the installation of the rear tone wheel. With the SIP bolt kit, these problems are a thing of the past. In the twinkling of an eye, the rims of the "non-ABS" models such as SIP, ZELIONI or even PIAGGIO rims can be mounted, the ABS tone wheel can be screwed to the special wheel nuts with internal thread. Possibly the ABS sensor can drag on the tone wheel, for this we supply two small M5 washers, these simply come to the screw between ABS sensor and swing arm. Consisting of PIAGGIO screws Mounting instructions: Fix the rim with the five new wheel nuts (bolts with hexagon head, internal thread) and the five M8 washers Screw the ABS tone wheel to the internal threads of the wheel nuts using the five M5 Torx screws and the five M5 corrugated washers Now mount the swing arm again The distance of the ABS sensor to the tone wheel should be at least 0,4mm according to PIAGGIO. If the distance is smaller or if the tone wheel rubs against the sensor, one or two of the supplied M5 washers must be placed on the sensor mounting screw between the ABS sensor and the swing arm to create sufficient distance to the tone wheel. CAUTION: The distance should not be too large, otherwise no signal can be picked up.