Side case Alu Xplorer 30 black Hepco & Becker

The sensible extension of the Xplorer series. If it should be a little more. The top pocket with extension zipper is attached to the Xplorer lid with 4 straps. The eyelets for the straps are already integrated in the lid

Attachment to the outside of the case. Allows you to carry your own accessories with straps (not included) on the case. NOTE: Holes must be drilled in the case / topaz.

is designed to accommodate a wide range of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard cases, such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with a top case carrier, sissy bar or solo rack without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers  Scope of delivery: left, right, mounting material and instructions Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

So that there is "order" in the case. Easy to pack and remove the contents of the case. Only water-repellent because the case is waterproof. With this inner pocket, things are no longer lying around loosely in the suitcase. The case is easier to load because the inner bag can be packed beforehand. And at the end of the tour, you don't have to remove the entire suitcase and carry it away, just the inside pocket. The bag is made of durable, black fabric. Equipped with a 2-way zipper and an adjustable shoulder strap, with this bag you will always be clean when unpacking.

the perfect solution for aluminum cases when something needs to be added. The holders for reserve canisters are a useful addition to the aluminum cases. The small plastic canister holds 2 liters and can of course also be used as a water canister. Attachment to the outside of the case. Complete set with all necessary parts. Material: holder made of aluminum and stainless steel, canister made of plastic.

Stable aluminum drinking bottle with screw cap (0.7L).

The case is attached to the carrier on one side and secured with the lock on the other. On extreme trips and expeditions, it makes sense to fix the case firmly and theft-proof on the case carrier. The security set offers the right option for this. A special bracket on the outside hooks behind the case carrier, the attachment is not accessible from the outside, inside the case with large knurled screws. Sentence for right and left

Standard tool roll pouch for the essentials! ATTENTION: Tools not included in delivery

High-quality metal attachment for suitcases to attach additional light luggage. Including drilling instructions The ideal addition - you can transport additional luggage on this railing. Also suitable as a transport aid. The railing is simply screwed onto the case. To do this, holes must be drilled in the lid. But don't worry, the top case is 100% waterproof again after the railing has been installed. For each topaz, the railing is made of tubular steel and is precisely shaped and protected with a black plastic coating.

The holders for aluminum drinking bottles are a useful addition to the aluminum cases. Attachment to the outside of the case or topaz. NOTE: Holes must be drilled in the case / topaz. ATTENTION: Bottle not included

The bolt-on side case carriers from Hepco & Becker are firmly attached to the motorcycle frame. Almost all Hepco & Becker touring side case systems fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. A lock adapter is also required for this. This is normally supplied with the side cases. This lock adapter is screwed to the right and left at the rear of the carrier and provides the mount for the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.Hepco & Becker side case carriers can usually be combined with Hepco & Becker rear carriers without any problems. Please observe the fitting instructions and the model-specific information. Features: Tubular steel construction MADE IN GERMANY firmly bolted to the motorcycle frame high-quality surface finish Fits most Hepco & Becker hard-shell side cases (please note model-specific information on the respective carrier for any restrictions that may apply) Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product) Scope of delivery: right + left incl. mounting material and instructions Luggage systems generally do not require an ABE or registration Tube diameter: 16 mm Color: black Weight: 3.1 kg Please note with top-loading side cases, the lid cannot be opened when the top case is fitted

Handle for the Hepco & Becker Xplorer cases 30 and 40. The handle has an ergonomically shaped handle and is attached to the case with the help of the lashing eyes.

universal school strap as a spare part for tank bags, leather handbags or Xplorer cases can also be used for other bags etc, provided lashing eyes are available Only to be used with the Xplorer cases in combination with the optional HB740014 carrying handles