Side case set Buffalo for tube pannier holder Hepco & Becker
Description
Product information
A model-specific tubular leather pannier holder is required for mounting (not included)
Features:
- Made in our leather manufactory in the traditional craftsmanship tradition
- Highest quality leather and workmanship
- Leather from European livestock farming
- Tanned in accordance with the strictest environmental regulations
- Made from 3-4 mm thick, fully tanned cowhide, tear-resistant seams
- Brass-chromed rivets, elegant, high-quality accessories
- Stability thanks to concealed molded and reinforced parts
- Reinforced plastic back panel
- Robust belt buckles and elegant, high-quality accessories
- Lockable pockets, available with the same key
- Inner bag and rain cover as recommended accessories
- Recommended payload: 5-7kg per case (Please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information)
- Luggage systems generally do not require an ABE or registration in the papers
- suitable for many Hepco & Becker tubular leather pannier racks (please note possible restrictions for the respective model-specific rack)
- incl. key and locking cylinder for the lid
- Packing volume: 21 liters
- External dimensions (HxWxD): 30 x 50 x 22 cm
- Internal dimensions (HxWxD): 29 x 47 x 16 cm
- Weight: 5.6 kg
Mounting options:
1. Fixed mounting (for an extra charge, see accessories, item number: 700429)
Version for self-assembly with mounting set for fixed mounting on the saddlebag holder (saddlebags cannot be removed). Holes must be drilled in the rear wall of the saddlebag for this purpose.
Note:
Once the retaining clips have been fitted, the saddlebag will only fit on the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with fitted retaining clips.
We recommend the C-Bow version of the saddlebag (if a C-Bow side carrier is available for your motorcycle).
No self-assembly is necessary here and a model change to another motorcycle with C-Bow is possible without any problems.
2. Quick-release fastener self-assembly (for an extra charge, see accessories, article number: 700403)
Another option when using a saddlebag holder is our quick-release fastener. This allows the saddlebag to be removed from the saddlebag holder at any time also secures the bag against theft by operating it from inside the bag.
Please note:
For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. Once the quick-release fastener has been fitted, the saddlebag will only fit the saddlebag holder connected to it. A change of model requires new holes. Please note: it is no longer possible to exchange a saddlebag with a quick-release fastener fitted.
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Zubehör Artikel
The fixed mounting kit for Hepco & Becker Liberty, Nevada, Buffalo and Ivory leather panniers. Scope of delivery: 1 x kit (for one saddlebag)
Keep your suitcase tidy. With this Hepco & Becker inner bag , your belongingsare no longer lying around loose in your suitcase. The suitcase is easier to load as the inner bag can be packed beforehand. And at the end of the tour, you don't have to remove the entire case and carry it away, but only the inner bag. The bag is made from hard-wearing black fabric.Equipped with a 2-way zipper and an adjustable carrying strap, you will always have a clean bag, even when unpacking. Scope of delivery: 1x inner bag Weight: 0,3 kg
Hepco&Becker saddlebags are attached to the saddlebag holder with retaining claws as standard. The saddlebag is thus securely attached to the holder, but cannot be removed.As an accessory, Hepco&Becker offers a so-called quick-release fastener for self-assembly. This allows the saddlebag to be removed from the saddlebag holder at any time. The fastener also secures the bag against theft by operating it from inside the bag.Important note: For self-assembly, holes must be drilled in the rear wall of the saddlebag. A tool is also required to install pop rivets. After fitting the quick-release fastener, the saddlebag only fits on the saddlebag holder connected to it. A change of model requires new holes. It is no longer possible to exchange a saddlebag with a quick-release fastener fitted. Scope of delivery: 1 piece incl. fastening material (for one saddlebag)
The rain cover for the Buffalo / Buffalo Custom / Ivory saddle bag is the ideal solution to protect your bag and its contents from rain. The saddle bag itself is water-repellent in everyday use, but the rain cover offers additional protection when the weather turns bad. If water does get into the rain cover, there is a drainage eyelet on the underside to drain off the water. The rain cover is simply pulled over the saddle bag and keeps it dry, so you don't have to worry about the contents. The black rain cover is a useful addition to your Buffalo / Buffalo Custom / Ivory saddle bag and ensures that your belongings remain protected in adverse weather conditions.
Hepco & Becker attaches great importance to material quality and workmanship, so that the LEGASY bag collection lives up to its name. However, the lifespan of any product also depends on proper care. The material mix of linen and leather requires special care in order to enjoy the product for a long time. Tips for cleaning: Only hand washing with lukewarm water and a detergent suitable for the material is recommended. It is better to maintain often and with little detergent than rarely with a lot of detergent. A soft brush and clear water are helpful for coarse dirt. We recommend lukewarm soapy water to clean the inner lining. Then squeeze it out carefully with a sponge with clear water. Dry products at room temperature. Warning: Do not wash or spin-dry in the washing machine. Incorrect cleaning can result in loss of color and / or feel.