Side Stand Plate for BMW F 450 GS (25-) Hepco & Becker
At least 2 years statutory warranty | Show EU notice
Description
Product information
To widen the contact surface of the side stand—for a completely secure footing on gravel, sand, crushed stone, etc.
Quick and easy to install, made of high-quality, CNC-milled aluminum with a powder-coated steel counterbracket—Made in Germany.
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink into the ground while on the side stand. A precisely milled widening plate that quickly screws onto the side stand and eliminates this risk is nowavailable fromHEPCO&BECKER ! By increasing the contact area of the side stand to approximately twice that of the original base, your motorcycle is perfectly protected against mishaps when parking or stopping.
Details:
- In some cases, more than twice the contact area
- Stable support for the motorcycle on all surfaces
- Oxidation-resistant anodized aluminum and a black-coated upper steel support
- Easy installation with just a few screws
- Designed specifically for your motorcycle model
- Does not require an ABE or registration
- Color: black/silver
- Weight: 0.2 kg
- Package contents: 1 piece
| Accessories category: | Attachment parts |
|---|
| BMW |
450 F 450 GS 2025-
|
|---|
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Accessory Items
high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW
For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.
