Slidepad for tank and engine guard Hepco & Becker

  Whether you spend most of your time riding on rough terrain, on country roads, or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times. More than that: In the event of a fall or accidental contact with the ground, they can prevent major damage to both the motorcycle and the rider. Hepco & Becker’s crash bars perfectly follow the lines of the bike, giving it a unique look. Constructed from an extremely sturdy tube-in-tube design made of high-quality German steel or stainless steel, they offer maximum protection—and many newer models already come with an integrated crash pad. An exclusive look thanks to a high-quality surface finish: premium powder coating from Germany.On top of that, motorcycle crash bars are incredibly well-suited for securely lashing down your bike on a trailer if you ever need to transport it. Features: Material: Steel tubing made in Germany Surface finish: High-quality powder coating Provides effective protection in the event of minor accidents or mishaps Helps secure the motorcycle Comprehensive and easy-to-understand installation instructions Crash bars do not require registration—so you don’t need to register them in your vehicle’s paperwork and, accordingly, do not need an ABE Weight: 3.6 kg Color: black What’s Included: Right + Left + mounting hardware (spacers, sleeves, washers, etc.) and installation instructions Model-specific notes: Can be combined with Hepco & Becker tank guards or original tank guards Adapter 42139556 is required when installing 5019556 (H&B engine guard) with or without 5029556 (H&B tank guard) The adapter set 42139556 is not required when mounting on an already installed tank guard (Hepco & Becker or original) Installation of H&B engine guard: 1x 42139556 (adapter); installation of H&B tank guard: 1x 42129556 (adapter); H&B engine and tank guards: 1x 42139556 Honda guard and H&B guard: no adapter required Notes: Please observe the model-specific notes listed in the installation instructions and product specifications! Unless explicitly stated otherwise, Hepco & Becker model-specific products are designed only for the motorcycle’s stock configuration! For safety reasons, all protective bars should be thoroughly inspected after a fall and replaced if necessary. If original or aftermarket parts are already installed, there may be restrictions; these are listed in the installation instructions.  

Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The protective bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some new models have an integrated crash pad. protects in the event of crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or notes that may arise no ABE or registration is required Weight: 3.1 kg

  Regardless of whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The protection bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required Weight: 3.15 kg Color: black

  Hepco & Becker tank guards perfectly follow the contours of the machine and give the motorcycle a unique character. In the event of a fall or accidental contact with the ground, they can protect the motorcycle and the rider from major damage and offer the best possible protection. A wise investment to avoid costly repairs in the event of an unexpected accident. Constructed from an extremely sturdy tube-in-tube design made of high-quality German steel or stainless steel, they offer maximum protection—and many newer models already come with an integrated crash pad. The material absorbs the forces of impact as effectively as possible. After a crash, a crash bar should be replaced. Welds and the material may have sustained hidden damage and would therefore no longer provide protection in the event of another crash. Individual parts or single sides can be easily ordered from us via email. Details: Protects the fuel tank, side fairings, and handlebar stem in minor accidents or mishaps Extremely helpful when securing the motorcycle, e.g., on a trailer Steel tubing made in Germany High-quality powder coating Package contents: right + left + mounting hardware (including spacers, sleeves, washers, etc.) and installation instructions Weight: 3.6 kg Color: black Model-specific notes: Can be combined with Hepco & Becker engine guards or original engine guards Adapter set 421395560001 is required when installing 5029556... (H&B fuel tank guard) with or without 5019556... (H&B engine guard) The adapter set 421395560001 is not required when installing on an already installed engine guard (Hepco & Becker or original) Installation of H&B engine guard: 1x 421395560001 (adapter) Installation of H&B fuel tank guard: 1x 421395560001 (adapter) H&B engine and fuel tank guards: 1x 421395560001 Honda guards and H&B guards: no adapter required Notes: When installed as intended, this product does not require an ABE or registration. Please observe the model-specific notes listed in the installation instructions and product specifications! Unless explicitly stated otherwise, our model-specific products are designed only for the motorcycle’s stock configuration! For safety reasons, all crash bars should be thoroughly inspected after a fall and replaced if necessary. If original or aftermarket parts are already installed, there may be restrictions; these are listed in the installation instructions.

  Whether you spend most of your time riding on rough terrain, on country roads, or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times. More than that: In the event of a fall or accidental contact with the ground, they can prevent major damage to both the motorcycle and the rider. Hepco & Becker’s crash bars perfectly follow the lines of the bike, giving it a unique look. Constructed from an extremely sturdy tube-in-tube design made of high-quality German steel or stainless steel, they offer maximum protection—and many newer models already come with an integrated crash pad. An exclusive look thanks to a high-quality surface finish: premium powder coating from Germany.On top of that, motorcycle crash bars are incredibly well-suited for securely lashing down your bike on a trailer should you ever need to transport it. Features: Material: Steel tubing made in Germany Surface finish: High-quality powder coating Provides effective protection in the event of minor accidents or mishaps Helps secure the motorcycle Comprehensive and easy-to-understand installation instructions Crash bars do not require registration—so you don’t need to register them in your vehicle’s paperwork and, accordingly, do not need an ABE Weight: 3.6 kg Color: black What’s Included: Right + Left + mounting hardware (spacers, sleeves, washers, etc.) and installation instructions Model-specific notes: Can be combined with Hepco & Becker tank guards or original tank guards Adapter 42139556 is required when installing 5019556 (H&B engine guard) with or without 5029556 (H&B tank guard) The adapter set 42139556 is not required when mounting on an already installed tank guard (Hepco & Becker or original) Installation of H&B engine guard: 1x 42139556 (adapter); installation of H&B tank guard: 1x 42129556 (adapter); H&B engine and tank guards: 1x 42139556 Honda guard and H&B guard: no adapter required Notes: Please observe the model-specific notes listed in the installation instructions and product specifications! Unless explicitly stated otherwise, Hepco & Becker model-specific products are designed only for the motorcycle’s stock configuration! For safety reasons, all protective bars should be thoroughly inspected after a fall and replaced if necessary. If original or aftermarket parts are already installed, there may be restrictions; these are listed in the installation instructions.

  Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad. Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY comprehensive and easy-to-understand assembly instructions please refer to the stored installation instructions or the vehicle-specific instructions for any restrictions or information that may arise no ABE or registration is required Weight: 4.0 kg Color: black Scope of delivery: right + left incl. mounting material and instructions

  Hepco & Becker tank guards perfectly follow the contours of the machine and give the motorcycle a unique character. In the event of a fall or accidental contact with the ground, they can protect the motorcycle and the rider from major damage and offer the best possible protection. A wise investment to avoid costly repairs in the event of an unexpected accident. Constructed from an extremely sturdy tube-in-tube design made of high-quality German steel or stainless steel, they offer maximum protection—and many newer models already come with an integrated crash pad. The material absorbs the forces of impact as effectively as possible. After a crash, a crash bar should be replaced. Welds and the material may have sustained hidden damage and would therefore no longer provide protection in the event of another crash. Individual parts or single sides can be easily ordered from us via email. Details: Protects the fuel tank, side fairings, and handlebar stem in minor accidents or mishaps Extremely helpful when securing the motorcycle, e.g., on a trailer Steel tubing made in Germany High-quality powder coating Package contents: right + left + mounting hardware (including spacers, sleeves, washers, etc.) and installation instructions Weight: 3.6 kg Color: silver Model-specific notes: Can be combined with Hepco & Becker engine guards or original engine guards Adapter set 421395560001 is required when installing 5029556... (H&B fuel tank guard) with or without 5019556... (H&B engine guard) Adapter set 421395560001 is not required when installing on an already installed engine guard (Hepco & Becker or original) Installation of H&B engine guard: 1x 421395560001 ( adapter) Installation of H&B fuel tank guard: 1x 421395560001 ( adapter) H&B engine and fuel tank guards: 1x 421395560001 Honda guards and H&B guards: no adapter required Notes: When installed as intended, this product does not require an ABE or registration. Please observe the model-specific instructions listed in the installation manual and product specifications! Unless explicitly stated otherwise, our model-specific products are designed only for the motorcycle’s stock configuration! For safety reasons, all crash bars should be thoroughly inspected after a fall and replaced if necessary. If original or aftermarket parts are already installed, there may be restrictions; these are listed in the installation instructions.