Side stand plate for BMW F 900 GS (24-) Hepco & Becker
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink on the side stand.We now offer a precisely milled widening plate that can be quickly bolted to the side stand and eliminates this danger!The Hepco & Becker side stand support extension! more than twice as much contact surface in some cases secure stand of the machine on all surfaces Oxidation-proof anodized aluminium and black-coated upper steel counter-holder simple installation with just a few screws requires no ABE or registration
Tubular luggage rack for BMW F 900 GS (24-) Hepco & Becker
The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco & Becker universal luggage rack extension Recommended load: 5 kg (Please observe the model-specific instructions and the motorcycle manufacturer's specifications. Heavy luggage should generally be transported on the rear, but in the side cases or tank bag. can usually be combined with side case carriers or C-Bow holders without any problems (observe the fitting instructions and model-specific information) Luggage racks generally do not require an ABE or registration Scope of delivery: luggage rack + mounting material + instructions
Luggage rack extension for BMW F 900 GS (24-) Hepco & Becker
Sturdy aluminum plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for the safe transportation of larger luggage rolls, travel bags, tents, duffel bags, etc. Aluminum construction with high strength and high-quality appearance Fastening options for straps Not suitable for top case mounting includes assembly material and instructions high-quality plastic coating Recommended load: 5 kg (Please observe the model-specific instructions and the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.
Passenger grab handle / railing for BMW F 900 GS (24-) Hepco & Becker
high-quality surface coating simple assembly incl. assembly material sturdy steel construction MADE IN GERMANY does not require ABE or registration in the papers
C-Bow side carrier left for BMW F 900 GS (24-) Hepco & Becker
solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard-shell cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with top-case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage racks do not require an ABE or registration in the papers Scope of delivery: left + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Please ensure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Side case set silver for BMW F 900 GS (24-) Hepco & Becker
Scope of delivery: Set consisting of a double-sided, model-specific black powder-coated case carrier in combination with a 40-liter and a recessed 37-liter case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrier Case features: recessed 37 l case on the end pot side 40 l case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner pockets, top pockets, etc.) Recommended payload: 10kg per side case Carrier features: Adventure-compatible, weather-resistant and firmly bolted pannier rack
Side case set black for BMW F 900 GS (24-) Hepco & Becker
Scope of delivery: Set consisting of a double-sided, model-specific stainless steel case carrier in combination with a 40-liter and a recessed 37-liter case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrier Case features: recessed 37 l case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner pockets, top pockets, etc.) Recommended payload: 10kg per side case Carrier features: Adventure-compatible, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish
Alurack top case carrier for BMW F 900 GS (24-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + mounting instructions no additional adapters are required for top case mounting high-quality surface finish technically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded down the model-specific base carrier is the same for the Easyrack and Alurack a special bracket is required instead of the normal Alurack bracket to mount the Hepco & Becker Alu Standard Topcase 35 (article number: 700007350 or 700007351) Luggage racks do not require ABE or registration Recommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorcycle manufacturer information) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Side case carrier cutout for BMW F 900 GS (24-) Hepco & Becker
Adventure-ready, weather-resistant and firmly bolted pannier rack powder-coated surface finish Scope of delivery: left + right + mounting material + instructions only the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carrier normal Xplorer cases and other Hepco & Becker cases do not fit
Stainless steel tank guard for BMW F 900 GS (24-) Hepco & Becker
The Hepco & Becker tank protection bars perfectly trace the lines of the machine and give the motorcycle an individual character. In the event of a crash or unintentional ground contact, they can protect the motorcycle and rider from major damage and offer the best possible protection. A sensible purchase to avoid costly repairs in the event of an unexpected accident.The material absorbs the forces of impact in the best possible way. A crash bar should be replaced after a fall. Welded seams and the material may have suffered invisible damage and therefore no longer offer protection in the event of another fall. Individual parts or individual sides can be ordered from us by e-mail without any problems. protects tank, side fairing and stem high-quality surface finish equally useful when lashing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting material Engine guards do not have to be registered and do not require an ABE please observe the installation instructions provided and the model-specific information for any restrictions that may apply
Tank protection bar black for BMW F 900 GS (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Engine guard black for BMW F 900 GS (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Stainless steel engine guard for BMW F 900 GS (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Alurack top case carrier for combination with original stainless steel bridge for BMW F 800 GS (24-)
Only for mounting on original accessory bridge (touring package). Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + mounting instructions no additional adapters are required for top case mounting high-quality surface finish technically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded down the model-specific base carrier is the same for the Easyrack and Alurack a special bracket is required instead of the normal Alurack bracket to mount the Hepco & Becker Alu Standard Topcase 35 (article number: 700007350 or 700007351) Luggage racks do not require ABE or registration Recommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorcycle manufacturer information) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
C-Bow side carrier for BMW F 900 GS (24-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Scope of delivery: left, right, mounting material and instructions Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Luggage rack for BMW F 900 GS (24-)
The Compact Travel Rack luggage rack for the BMW F900GS 2023 is the ideal accessory for motorcyclists who want to maximize their load capacity without compromising the design of the motorcycle. Specially designed for the F900GS model, this rack offers a robust and lightweight structure made of high-quality materials, guaranteeing durability and resistance over time. The compact design ensures a sleek profile, while the optimized loading capabilities make it perfect for transporting luggage, equipment and accessories on your travels. Easy to install, the rack blends seamlessly into the lines of the motorcycle and offers functionality without sacrificing aesthetics. Face any adventure with the confidence of having a reliable and practical rack designed to meet the needs of the most demanding motorcyclists. With the Compact Travel Rack, every journey becomes easier and more enjoyable. Technical features: ISOTTA quality 100 % Made in Italy Easy mounting with mounting kit A/PP1231
Grip protection (left + right) for BMW F 900 GS (24-) Hepco & Becker
The Hepco & Becker grip guard ensures reliable protection of the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. powder-coated solid construction made of tubular steel Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please observe the mounting instructions and vehicle-specific information If a handlebar riser is installed, mounting is also possible in most cases. Longer bolts are required for installation depending on the handlebar riser. You must obtain these screws yourself, as we do not have all screws available in all suitable lengths.
Kriega OS-Base for all BMW GS models
The OS-BASE is a heavy-duty luggage carrier belt without a luggage carrier that has been specially developed for all BMW GS models with a luggage carrier from the legendary R 80 GS to the current R 1300 GS.In this case, rackless means absolute independence from fixed frames or additional parts, because this lightweight yet extremely robust strap is all you need to securely and reliably attach the waterproof Kriega OS-ADVENTURE PACKS to your motorbike. Installation is quick and uncomplicated, taking just a few minutes, and the system can withstand even extreme loads for years. Thanks to its modular design, the OS-BASE grows with your requirements and adventures - once purchased, it accompanies you from tour to tour and from motorbike to motorbike. The 100% waterproof OS-ADVENTURE PACKS can be flexibly combined so that you can mount two or three packs on the OS-BASE as required. For shorter trips or minimal luggage, simply use the SUBFRAME LOOPS included in the scope of delivery to attach a single OS-ADVENTURE PACK directly to the seat - without the OS-BASE.This system offers maximum versatility, uncompromising quality and a clever solution for anyone looking for adventure without compromise. Details: Heavy-duty Hypalon™ constructionReinforced seams at all stress pointsAluminium alloy buckles and hooksFoam padding to protect the bodyworkLoad capacity from 12 to 54 litres with centre pack mounting optionQuick and easy installationnon-slip cam bucklesWeight: 1150 gColour: black Scope of delivery 1 x OS-BASE with quick-release buckles4 x heavy-duty OS RINGS4 x SUBFRAME LOOPS2 x EVA protection pads Pack options: Suggestions for the assembly of OS-ADVENTURE PACKS Day trips: 2 x OS-6 for 12 litres of tools and spare parts that you can take with you on every tripShort trips: 2 x OS-12 for a total of 24 litres of weekend essentialsLonger journeys: Up to 3 x OS-18 for a total capacity of 54 litres MODULAR DESIGNThe 100% waterproof Kriega OS-ADVENTURE PACKS are highly customisable. Combine the sizes and attach two or three packs to this OS-BASE, depending on how much capacity you need. Use the included SUBFRAME LOOPS to attach a single OS-ADVENTURE PACK to the seat, without the OS-BASE, for the shortest trips.
Handlebar riser H=30 mm with offset 25 mm back for BMW F 900 GS (24-) Hepco & Becker
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Engine guard silver for BMW F 900 GS (24-)
This engine guard was specially developed for the BMW models BMW F 750 GS and F 850 GS. Additional protection for the engine against stone chipping and ground contact: Made of high-quality aluminum alloy, the engine guard shows its full potential off the road, but also gives road motorcycles added safety and an individual look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows easy installation. Sturdy and simple installation on original mounting points, no modifications to the motorcycle are required Model-specific development for optimum fit Mounting material included in the scope of delivery Robust design made from high-quality aluminum alloy Scope of delivery 1 x engine guard Fitting instructions Mounting material Details Material: aluminum Surface: brushed Color: silver Total weight: approx. 4.2 kg
Engine protection plate black for BMW F 900 GS (24-) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Our engine protection plates protect the manifold and the engine block from impacts and stone chipping, even with the heaviest ground contact.Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. effective protection for stone chips and crossings technically high-quality workmanship made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick precisely manufactured, adapted to the shape of the motorcycle incl. mounting kit and easy-to-understand instructions please observe the fitting instructions and model-specific information as to whether there may be any restrictions
Engine protection plate silver for BMW F 900 GS (24-) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Our engine protection plates protect the manifold and the engine block from impacts and stone chipping, even with the heaviest ground contact.Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. effective protection for stone chips and crossings technically high-quality workmanship made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick precision-fit production, adapted to the shape of the motorcycle incl. mounting kit and easy-to-understand instructions please observe the fitting instructions and model-specific information as to whether there may be any restrictions
Headlight protector for BMW F 900 GS (24-)
This high-quality headlight protector is designed to protect your motorcycle's headlight from dirt, mud, dust and other external influences that could damage it while riding, especially on difficult terrain or in adverse weather conditions. Made from transparent PMMA, this headlight protector provides robust protection without compromising the aesthetics of the headlight and allows full visibility of the light, even in difficult riding conditions. The aerodynamic and lightweight design not only contributes to a safer ride, but also ensures a perfect fit for the BMW F 900 GS 2024 model, thanks to its specific compatibility. The transparent finish gives the headlight protector an elegant and discreet look that integrates perfectly with the sporty and modern style of the motorcycle while maintaining a clean, minimalist appearance. Technical features: Material: PMMA Thickness: 3 mm Color: Transparent 100% Made in Italy Isotta quality
Smartrack rear carrier black for BMW F 900 GS (24-) Hepco & Becker
Hepco&Becker Smartrack black: for mounting on existing Hepco&Becker tube adapters. Can be mounted instead of aluminum, Easy or Minirack. The facts: Ideal for attaching small soft luggage and rear bags to the rear of the motorcycle Rear bags can be simply clicked on using the Basic rear bag attachment (Art.:516200) Slots on the side for lashing luggage High stability, high-quality look Made of plastic Comprehensive, easy-to-understand mounting instructions Scope of delivery: Smartrack + mounting kit + instructions Luggage systems generally do not require an ABE or registration in the papers
