Barkbusters hardware kit two-point mounting aluminum BMW
Hardware kits are tailor-made and fit perfectly on many Street, Adventure, Dual Sport, Trail and Rally bikes. The full wrap-around aluminum hardware is compatible with JET, VPS, STORM or CARBON fenders. All recommended mounting options are for motorcycles with OEM specifications. Two Point Mount products are designed for impact protection.
Blinker front left / rear right for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
Blinker front right / rear left for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
C-Bow side carrier black for BMW G 650 GS (11-16)/Sertao (12-16)/F 650 GS/Dakar (-07)
The C-Bow side bag holder is designed to hold a variety of Hepco&Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be simply and easily attached to the C-Bow with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco&Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.1 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags
Electrosport regulator - BMW F650
ElectroSport regulators are designed as a direct replacement for the original equipment Manufactured to handle higher power loads Developed in the USA Best value for money
Engine guard black for BMW G 650 GS (11-16)/Sertao (12-16) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.1 kg Color: black Scope of delivery: right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine guard silver for BMW F 650 GS Dakar (00-03)/F 650 GS (01-03)/G 650 GS (09-16)
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Provides effective protection in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.0 kg Color: Silver Scope of delivery: right + left incl. mounting material (spacers, sleeves, washers etc.) and Fitting instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine protection plate silver for BMW G 650 GS (11-16)/Sertao (12-16) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Hepco & Becker engine protection plates protect the manifold and the engine block perfectly against impacts and stone chipping, even with the heaviest ground contact. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminum, the Hepco & Becker engine protection plate allows enough air through for cooling thanks to its special shape and is naturally angled in such a way that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. Details: Effective protection for stone chips and crossings Provides additional protection for sensitive parts on the manifold and engine block Technically high-quality workmanship Made from high-strength aluminum MADE IN GERMANY 3-4mm thick Precisely fitting production, adapted to the shape of the motorcycle Incl. mounting kit and easy-to-understand instructions Please observe the installation instructions and model-specific information on whether there may be any restrictions Surface finish: Brushed, anodized Color: Silver anodized Weight: 2.1 kg Notes: An underride guard is registration-free - so you do not need to enter it in the papers and therefore do not need an ABE. Please observe the fitting instructions and model-specific information as to whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorcycle! Restrictions may apply to original parts or accessories that have already been installed; these can be found in the fitting instructions.
Factory Links steering head bearing kit Sherco/Yamaha
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
Factory Links wheel bearing set
Bearing set for rear wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Lamp guard black for BMW G 650 GS (11-16)/Sertao (12-16) Hepco & Becker
A stone thrown up on off-road passages often means the end for the expensive headlight. The Hepco & Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look. Details: Matched to the design of the motorcycle Effective protection No reflections or danger from glare Simple mounting on mostly existing screw points Solid construction made from German steel Robust and high-quality coating Made in Germany without TÜV Color: black Weight: 0.5 kg Note: There is no ABE or TÜV approval for this product in Germany.
Luggage rack extension silver for BMW G 650 GS (11-16)/Sertao (12-16) Hepco & Becker
Sturdy aluminum plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffel bags, etc. Details: Aluminum construction with high strength and high-quality appearance Fastening options for straps Not suitable for top case mounting Incl. mounting material and instructions High-quality plastic coating Recommended load: 5 kg (Please observe the model-specific instructions and the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag Weight: 1.4 kg
Main stand black for BMW G 650 GS (11-16) Hepco & Becker
Easy to operate. Stable. The main stands from Hepco & Becker usually do not restrict lean angle clearance when riding and are extremely robust. Thanks to the sophisticated geometry and non-slip tread surface, it is very easy to park the motorcycle safely in any situation. The precisely manufactured stands are very stable, sandblasted, primed and powder-coated in black and therefore weatherproof and of lasting value. Main stands simplify maintenance work and ensure a secure stand, e.g. when refueling. They take the strain off the suspension elements and the rear wheel during winter storage. Features: ABE is supplied Usually no restriction of the lean angle clearance High-quality surface finish Scope of delivery: Main stand + mounting material + instructions Please note the installation instructions provided Color: black Weight: 2.7 kg
Side case carrier Lock-it black for BMW G 650 GS (11-16)/Sertao (12-16) Hepco & Becker
The Hepco & Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws. All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks. Details: Sturdy construction MADE IN GERMANY Quickly removable, only inconspicuous small tabs remain on the motorcycle High-quality surface finish Generally easy to fit, please refer to the fitting instructions provided Please refer to the vehicle-specific information or the installation instructions for any restrictions Fits most Hepco & Becker hard-shell side cases (please refer to the model-specific information on the respective carrier for any restrictions that may apply) Luggage systems generally do not require an ABE or registration Tube diameter: 16 mm Color: black Weight: 4.0 kg Scope of delivery: Right + left incl. mounting material and instructions.
Side case carrier silver for BMW F 650 GS Dakar (00-03)/F 650 GS (01-03)/G 650 GS (09-16)
The bolted side case carriers from Hepco&Becker are firmly attached to the motorcycle frame. Almost all touring side case systems from Hepco&Becker fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. An additional lock adapter is required for this. This is normally supplied with the side cases. This lock adapter is bolted to the right and left of the carrier at the rear and holds the case retaining lock. The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall. The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any problems. Please refer to the fitting instructions and the model-specific information. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Fits most Hepco&Becker hard-shell side cases (please note the model-specific information on the respective carrier for any restrictions that may apply) Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product) Luggage systems generally do not require an ABE or registration Tube diameter: 16 mm Color: silver Weight: 3.2 kg Scope of delivery: Right + left incl. mounting material and instructions
Tank ring Basic incl. tank bag lock unit for BMW Hepco & Becker
for BMW F 800 GS Adventure / F 800 GS (2008-2018) / F 700 GS (2012-) / F 650 GS (34 hp version) (2008-) / G 650 GS (2011-2016) This functional tank ring enables the attachment of a tank bag from Hepco & Becker. The scope of delivery includes a BASIC tank ring, as well as the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism the Hepco & Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3.0 kg Weight: 0.3 kg Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system. Not suitable for: Street Daypack, Street Tourer M, Street Tourer L, Royster Daypack, Royster Tankbag
Tecnium lowering kit type 11 - BMW
Type: Swing arm For adjusting the seat height to the riderEven more comfort and more safety and ease during individual riding maneuversMade of aluminum alloyInstallation by a specialist is recommended
Tecnium Street Performance sintered metal brake pads - MF174
Excellent compromise between performance and durability for performance-oriented use in the sports sector (high coefficient of friction at the front). In conjunction with MR brake pads (medium coefficient of friction) at the rear, they offer optimum brake balance.
Tecnium Street Performance sintered metal brake pads - MR175
Excellent compromise between performance and durability for performance-oriented use in the sports sector. MR brake pads have a medium coefficient of friction, which is ideal for the rear axle, and offer an optimum braking balance in conjunction with MF brake pads (high coefficient of friction) at the front.
