Case carrier set Cutout carrier incl. case set Xplorer Cutout black for BMW R 1200 GS /Adventure (-13)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 17.3 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: black, stainless steel
Case carrier set Cutout carrier incl. case set Xplorer Cutout silver for BMW R 1200 GS /Adventure (-13)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 17.3 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: silver, stainless steel
Kriega OS-Base for all BMW GS models
The OS-BASE is a heavy-duty luggage carrier belt without a luggage carrier that has been specially developed for all BMW GS models with a luggage carrier from the legendary R 80 GS to the current R 1300 GS.In this case, rackless means absolute independence from fixed frames or additional parts, because this lightweight yet extremely robust strap is all you need to securely and reliably attach the waterproof Kriega OS-ADVENTURE PACKS to your motorbike. Installation is quick and uncomplicated, taking just a few minutes, and the system can withstand even extreme loads for years. Thanks to its modular design, the OS-BASE grows with your requirements and adventures - once purchased, it accompanies you from tour to tour and from motorbike to motorbike. The 100% waterproof OS-ADVENTURE PACKS can be flexibly combined so that you can mount two or three packs on the OS-BASE as required. For shorter trips or minimal luggage, simply use the SUBFRAME LOOPS included in the scope of delivery to attach a single OS-ADVENTURE PACK directly to the seat - without the OS-BASE.This system offers maximum versatility, uncompromising quality and a clever solution for anyone looking for adventure without compromise. Details: Heavy-duty Hypalon™ constructionReinforced seams at all stress pointsAluminium alloy buckles and hooksFoam padding to protect the bodyworkLoad capacity from 12 to 54 litres with centre pack mounting optionQuick and easy installationnon-slip cam bucklesWeight: 1150 gColour: black Scope of delivery 1 x OS-BASE with quick-release buckles4 x heavy-duty OS RINGS4 x SUBFRAME LOOPS2 x EVA protection pads Pack options: Suggestions for the assembly of OS-ADVENTURE PACKS Day trips: 2 x OS-6 for 12 litres of tools and spare parts that you can take with you on every tripShort trips: 2 x OS-12 for a total of 24 litres of weekend essentialsLonger journeys: Up to 3 x OS-18 for a total capacity of 54 litres MODULAR DESIGNThe 100% waterproof Kriega OS-ADVENTURE PACKS are highly customisable. Combine the sizes and attach two or three packs to this OS-BASE, depending on how much capacity you need. Use the included SUBFRAME LOOPS to attach a single OS-ADVENTURE PACK to the seat, without the OS-BASE, for the shortest trips.
Shad case carrier 3P for BMW R1250 / 1200GS (19-21)
The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, in addition to the aesthetic aspects, the focus was above all on safety. Integrated design: The 3P fastening system optimally adapts to the contours of the vehicle. The typical rectangular frame has been reduced to a single arm that supports the three points (3P) used to attach the cases. Position: both the volume of the pannier and the angle of the 3P system have been designed to move the weight of the luggage as far as possible to the center of the motorcycle. This allows for greater safety and stability when riding with a full load. Aerodynamics: the use of 3 points gives stability and flexibility at the same time. This is achieved by a slight swing of the case. It therefore allows air to circulate easily around this case, avoiding the so-called angular effect of a typical flat and rigid case. Again, the better result is obtained in terms of safety and stability during the journey. Patented: The uniqueness and technical innovation of the 3P system have allowed SHAD to patent it. This makes SHAD the only manufacturer that can offer this fastening system.
Side case carrier Cutout stainless steel for Xplorer Cutout case 40/37 for BMW R 1200 GS /Adventure (-13)
Features: Adventure-suitable, weather-resistant and firmly bolted pannier rackmade of stainless steel Powder-coated surface finish Only the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carrier Normal Xplorer cases and other Hepco&Becker cases do not fit Weight: 3.9 kg Scope of delivery: Left, right, mounting material and instructions Notes: Only suitable for: Xplorer 40 Cutout, Xplorer 37 Cutout
Side case carrier fixed black for BMW R 1200 GS Adventure (06-13) Hepco & Becker
The bolted side case carriers from Hepco&Becker are firmly attached to the motorcycle frame. Almost all touring side case systems from Hepco&Becker fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. An additional lock adapter is required for this. This is normally supplied with the side cases. This lock adapter is bolted to the right and left of the carrier at the rear and holds the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco&Becker can usually be combined with Hepco&Becker rear carriers without any problems. Please observe the fitting instructions and the model-specific information. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Fits most Hepco&Becker hard-shell side cases (please note the model-specific information on the respective carrier for any restrictions that may apply) Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product) Luggage systems generally do not require an ABE or registration Recommended payload: 10 kg in each side case Tube diameter: 16 mm Color: black Weight: 4.1 kg Scope of delivery: Right + left incl. mounting material and instructions Notes: Firmly bolted to the motorcycle frame (no lock-it system) Asymmetrical side case carrier. Recommendation: use a narrower case on the end pot side, e.g. 30 L & 40 L in combination.
Side case carrier Lock-it black for BMW R 1200 GS Adventure (06-13) Hepco & Becker
The Hepco & Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and you can remove the side parts to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with Hepco & Becker lockable Lock-it screws. All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks. Details: Sturdy construction MADE IN GERMANY Quickly removable, only inconspicuous small tabs remain on the motorcycle High-quality surface finish Generally easy to fit, please refer to the fitting instructions provided Please refer to the vehicle-specific information or the installation instructions for any restrictions Fits most Hepco & Becker hard-shell side cases (please refer to the model-specific information on the respective carrier for any restrictions that may apply) Luggage systems generally do not require an ABE or registration Recommended payload: 10 kg in each side case Tube diameter: 16 mm Color: black Weight: 5.3 kg Scope of delivery: Right + left incl. mounting material and instructions Notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the end pot side, e.g. 30 L & 40 L in combination
Side case carrier Lock-it silver for BMW R 1200 GS Adventure (06-13) Hepco & Becker
The Hepco & Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and you can remove the side parts to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with Hepco & Becker lockable Lock-it screws. All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks. Details: Sturdy construction MADE IN GERMANY Quickly removable, only inconspicuous small tabs remain on the motorcycle High-quality surface finish Generally easy to fit, please refer to the fitting instructions provided Please refer to the vehicle-specific information or the installation instructions for any restrictions Fits most Hepco & Becker hard-shell side cases (please refer to the model-specific information on the respective carrier for any restrictions that may apply) Luggage systems generally do not require an ABE or registration Recommended payload: 10 kg in each side case Tube diameter: 16 mm Color: silver Weight: 5.3 kg Scope of delivery: Right + left incl. mounting material and instructions Notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the end pot side, e.g. 30 L & 40 L in combination
Small Sport Star Rack rear bag for belt attachment on original BMW Hepco & Becker bridge
Fabric rear bag for belt attachment on the original BMW R 1200/1250 GS / LC / Adventure bridge. Not waterproof. The high-quality tail bag is specially tailored to be attached to the original luggage rack of the BMW R 1200 GS. Made from coated Cordura fabric, it is water-repellent and robust. With a zip and compression straps, it offers a variable volume from 15 to 25 liters. Volume / Dimensions: Contents: 15-25 liters Weight: 0.8 kg Dimensions: WxHxD 34 x 23 x 18-25 cm < br />
Tubular luggage rack top case carrier black for BMW R 1200 GS Adventure (06-13) Hepco & Becker
Proven tubular luggage racks Topcase carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all Hepco&Becker top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock Recommended payload: 5 kg (please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require an ABE or registration Color: black Weight: 1.1 kg Notes: Not suitable for: "Orbit" top case and top cases with universal plate
Tubular luggage rack top case carrier silver for BMW R 1200 GS Adventure (06-13) Hepco & Becker
Proven tubular luggage racks Topcase carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all Hepco&Becker top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. The basic mount has not changed. The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock Recommended load: 5 kg (please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage carriers generally do not require ABE or registration Color: silver Weight: 1.1 kg Notes: Not suitable for: "Orbit" top case and top cases with universal plate
