Aluminum protection plate for original main stand for BMW R 1200 GS LC (13-18) Hepco & Becker
The logical addition to the engine guard! The engine guard continues over the main stand. In addition, the machine can slide over the entire protective surface in the event of a collision. Also looks great, partly with laser-cut lettering. Details: Accessories for the original BMW main stand Anodized aluminium Weight: 0.7 kg
Alurack top case carrier black for BMW R 1200 GS LC (13-18) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 2.4 kg Color: black Scope of delivery Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
Alurack top case carrier silver for BMW R 1200 GS LC (13-18) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 2.4 kg Color: silver Scope of delivery Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
Auxiliary headlight holder kit for BMW R 1250GS / BMW R 1200GS - Barracuda
The Barracuda EXTRA-LIGHT bracket kit for the BMW R1200GS and R1250GS allows the installation of universal auxiliary headlights on existing mounting points without having to make changes to the original parts of the motorcycle. They are made of lightweight stainless steel INOX 30/10, combining resistance with lightness. The auxiliary headlights must be purchased separately.
BMC Sport air filter for BMW R 1200 GS / R 1250 GS
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
Bracket for BMW original headlight for R 1200 GS LC/R 1250 GS (13-23) Hepco & Becker
Details: Only in conjunction with Hepco & Becker tank protection bar Original BMW auxiliary headlights not included in the scope of delivery Special holder for the original BMW auxiliary headlights Weight: 0.5 kg Color: black
C-Bow side carrier black for BMW R 1200 GS LC (13-18) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 1.9 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Case carrier set Cutout carrier incl. case set Xplorer Cutout black for BMW R 1200 GS LC (13-18)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.9 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: black, stainless steel
Case carrier set Cutout carrier incl. case set Xplorer Cutout silver for BMW R 1200 GS LC (13-18)
Set consisting of a double-sided, Motorcycle model-specific stainless steel pannier rack in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the rack Features Motorcycle side cases: recessed 37 liter case on the end pot side 40 liter case on the other side highly impact-resistant plastic and anodized aluminium sheets in combination incl. key and cylinder absolutely watertight thanks to integrated rubber seal in the lid extensive range of accessories available (inner bags, top bags, etc.) Features Motorcycle luggage rack: adventure-suitable, weather-resistant and bolted stainless steel pannier rack blasted and electropolished surface finish incl. mounting material and assembly instructions Volume / dimensions: Weight: 16.9 kg Capacity 42 / 37 liters External dimensions (HxWxD):: 39 x 50 x 31 cm / 39 x 50 x 31-24 cm Internal dimensions (HxWxD): 32 x 39.5 x 26.5 cm / 32 x 39.5 x 26.5 - 19.5 cm Color: silver, stainless steel
Crash bar for BMW R 1200 GS (Bj. 17-18) / R 1250 GS (Bj. 19-) Givi
for BMW R 1200 GS (17-18) / R 1250 GS (19)Specific crash bar, black / tube diameter 25 mm / We recommend that the installation is carried out by a professional mechanic / protects the upper lateral areaImportant note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Crash bar stainless steel for upper lateral area for BMW R 1200 GS (Bj. 17-18) / R 1250 GS (Bj. 19
for BMW R 1200 GS (17-18) / R 1250 GS (19-)Specific stainless steel crash bar / tube diameter 25 mm / We recommend that the installation is carried out by a professional mechanic / protects the upper lateral areaImportant note:GIVI products have been developed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Deep bench seat rider, 2cm lowered, for BMW R 1200 GS LC /Adventure LC, R 1200 Rallye, R 1250 GS
for R 1200 GS LC (2013-2018), R 1200 GS LC ADV (2014-2018), R 1200 RALLYE (2017-2019), R 1250 GS (2019-2023) Isotta's seat benches are designed with the elegance of the motorcycle in mind and follow the concept that aims to increase comfort for premium customers in the motorcycle segment, especially BMW. The materials are 100% water-repellent and weatherproof, the outer cover has a treatment that regulates the temperature on the saddle and prevents excessive overheating in the sun, and the seams are welded to prevent the ingress of water or dirt. To meet the needs of all customer groups, we have increased comfort by inserting 2 cm of memory foam instead of the traditional 1 cm and providing a prostate channel to relieve pressure in this area. Isotta comfort seats are made in Italy by the best craftsmen in the Motor Valley, from the base part to the padding to the outer cover. Details: Water-repellent, sweat-resistant and non-slip material Glued and heat-sealed seams with hot air for 100% waterproofness Cover material with ThermoPro coating Memory foam padding Prostate channel to improve rider comfort 2 cm lower than the original BMW seat Isotta quality! Recommendations: Can be combined with the passenger seat for GS Standard (SE1058) or for GS Adventure (SE1062)
Deep bench seat rider, 3cm lowered, for BMW R 1200 GS LC /Adventure LC, R 1200 Rallye, R 1250 GS
for R 1200 GS LC (2013-2018), R 1200 GS LC ADV (2014-2018), R 1200 RALLYE (2017-2019), R 1250 GS (2019-2023) Isotta's seat benches are designed with the elegance of the motorcycle in mind and follow the concept that aims to increase comfort for premium customers in the motorcycle segment, especially BMW. The materials are 100% water-repellent and weatherproof, the outer cover has a treatment that regulates the temperature on the saddle and prevents excessive overheating in the sun, and the seams are welded to prevent the ingress of water or dirt. Isotta comfort seats are made in Italy by the best craftsmen in the Motor Valley, from the base part to the padding to the outer cover. Details: Water-repellent, sweat-resistant and non-slip material Glued and heat-sealed seams with hot air for 100% waterproofness Cover material with ThermoPro coating Memory foam padding 3 cm lower than the original BMW seat Isotta quality! Recommendations: Can be combined with the passenger seat for GS Standard (SE1058) or for GS Adventure (SE1062)
Easyrack top case carrier black for BMW R 1200 GS LC (13-18) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended top speed: 130 km/h Weight: 2.5 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Engine guard black for BMW R 1200 GS LC (13-18) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 4.3 kg Color: black Scope of delivery right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please note the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine guard silver for BMW R 1200 GS LC (13-18) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.8kg Color: silver Scope of delivery: right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine protection plate silver for BMW R 1200 GS LC (13-18) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Hepco & Becker engine protection plates protect the manifold and the engine block perfectly against impacts and stone chipping, even with the heaviest ground contact. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminum, the Hepco & Becker engine protection plate allows enough air through for cooling thanks to its special shape and is naturally angled in such a way that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. Details: Effective protection for stone chips and crossings Provides additional protection for sensitive parts on the manifold and engine block Technically high-quality workmanship Made from high-strength aluminum MADE IN GERMANY 3-4mm thick Precisely fitting production, adapted to the shape of the motorcycle Incl. mounting kit and easy-to-understand instructions Please observe the installation instructions and model-specific information on whether there may be any restrictions Surface finish: Brushed, anodized Color: Silver anodized Weight: 1.2 kg Notes: An underride guard is registration-free - so you do not need to enter it in the papers and therefore do not need an ABE. Please observe the fitting instructions and model-specific information as to whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorcycle! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.
Foot and leg protectors for BMW R 1200 GS LC /Rallye (17-18), R 1250 GS, pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: High quality PMMA (acrylic glass) that keeps the transparency unchanged over time Thickness: 4 mm 100% made in Italy Specially made for this motorcycle Supplied as a set for right and left Mounting material included
Foot protector for BMW R 1200 GS Adventure (Bj. 14-18) / R 1200 GS (Bj. 13-18) / R 1250 GS (Bj. 19-)
for BMW R 1200 GS Adventure (14-18) / R 1200 GS (13-18) / R 1250 GS (19-) / BMW R 1250 GS Adventure (19-)Specific foot protector made of ABSImportant note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems etc. cannot be guaranteed
Foot widening for side stand for BMW R 1200 GS (Bj. 13-18) / R 1250 GS (Bj. 19-) Original Giv
for BMW R 1200 GS (13-18) / R 1250 GS (19-) Specific foot widening made of aluminum and stainless steel for the original side stand / not compatible with the lowered suspensionImportant note:GIVI products are designed for vehicles in their original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Gimbal protection black for BMW R 1200 GS LC (13-18) Hepco & Becker
Details: Beveled and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Incl. mounting material and instructions Color: black Weight: 0.3 kg
Hand protector extensions for BMW R 1200 GS LC /Adventure LC, R 1250 GS, pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: an upgrate for the original BMW hand guard high-quality PMMA (acrylic glass), which leaves the transparency unchanged over time Thickness: 4 mm 100% made in Italy specially made for this motorcycle supplied as a set for right and left including mounting material available in black matt or slightly tinted
Handle guard black for BMW R 1200 GS LC (13-18) Hepco & Becker
The Hepco & Becker model-specific hand protector guard ensures reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. Tubular steel construction precisely tailored to your motorcycle for the perfect look. Ideal for all adventure bikes to stabilize the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for handlebar fittings in the event of a fall with optimum aerodynamics. As individual as you are - make it your bike! Details: Material: Tubular steel, made in Germany Surface finish: High-quality, color-matching powder coating Weight: 1.3 kg Color: black Scope of delivery: Right + left incl. mounting material and Assembly instructions Notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorcycle, they are NOT included! Please observe the model-specific information listed in the installation instructions and the features! Hepco & Becker model-specific products are, unless explicitly stated otherwise only developed for the standard condition of the motorcycle! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.
Handle guard blue metallic for BMW R 1200 GS LC (13-18) Hepco & Becker
The Hepco & Becker model-specific hand protector guard ensures reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. Tubular steel construction precisely tailored to your motorcycle for the perfect look. Ideal for all adventure bikes to stabilize the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for handlebar fittings in the event of a fall with optimum aerodynamics. As individual as you are - make it your bike! Details: Material: Tubular steel, made in Germany Surface finish: High-quality, color-matching powder coating Weight: 1.3 kg Color: blue metallic Scope of delivery: Right + left incl. mounting material and Installation instructions Notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorcycle, they are NOT included! Please observe the model-specific information listed in the installation instructions and the features! Hepco & Becker model-specific products are, unless explicitly stated otherwise only developed for the standard condition of the motorcycle! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.
