Arrowhead starter motor - BMW R1200GS
Bihr starter motors are a reliable alternative to original equipment. Starter motor according to series type Mounted in place of the defective component
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Foot and leg protectors for BMW R 1200 RT (05-09), transparent, pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: high quality PMMA (acrylic glass) that keeps the transparency unchanged over time thickness: 6 mm 100% made in Italy specially made for this motorcycle protection for feet and legs in the rain supplied as a set for right and left including mounting kit
Foot protectors for BMW R 1200 RT (10-14), lightly tinted, pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Suitable for: BMW R 1200 RT (2010 - 06/2014) Details: made from 6 mm thick PMMA material (acrylic glass) specially made for this motorcycle supplied as a set for right and left mounting material included 100% made in Italy
Hand protectors for BMW R 1200 RT (05-09), transparent, pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: made of 6 mm thick PMMA material (acrylic glass) 100% made in Italy specially made for this motorcycle including mounting material supplied as a set for right and left
Hand protectors for BMW R 1200 RT (10-14), pair
Isotta does not produce universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. For: BMW R 1200 RT (2010 - 06/2014) Details: made of 6 mm thick PMMA material (acrylic glass) 100% made in Italy specially made for this motorcycle including mounting material supplied as a set for right and left
High windshield - height 700 mm for BMW R 1200 RT (05-09), lightly tinted
This windshield was developed to provide the driver with an optimal experience. Made from high quality PMMA material that keeps the transparency unchanged over time. Only for mounting on the original brackets. Details: Dimensions (height x width): 700 mm x 615 mm made from 6 mm thick PMMA material (acrylic glass) easy mounting (is mounted on the original brackets ) 100% made in Italy Product with German TÜV approval without ABE
High windshield original type - height 700 mm for BMW R 1200 RT (10-14), lightly tinted
This windshield was developed to provide the driver with an optimal experience. Made from high quality PMMA material that keeps the transparency unchanged over time. Only for mounting on the original brackets. Suitable for: BMW R 1200 RT (2010 - 06/2014) Details: Dimensions (height x width): 700 mm x 605 mm made of 6 mm thick PMMA material (acrylic glass) easy mounting (is mounted on the original brackets ) with German TÜV approval and ABE 100% made in Italy
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron grip rubber red 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and forms a beautiful contrast with the trapezoidal tongues to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER Pro Akron-Flash LED Bar End Indicator Housing Black / Lens Orange (Pair), Front
HIGHSIDER AKRON-FLASH LED handlebar end indicators, E-approved as front direction indicator - attractive handlebar end with flashing function - With these handlebar end indicators, HIGHSIDER once again demonstrates a real flair for outstanding design and top functionality. The ultra-bright, adjustable flashing angle indicator lights of the latest generation from HIGHSIDER provide unmistakable directional indication. The handlebar end indicators with tinted glass, high-quality CNC-milled aluminum housing and characteristic cap are simply beautiful. Packaged so harmoniously, the front direction indicators literally disappear from the vehicle when not in use. Easy to fit thanks to the clamping system with various sleeves. Universal fit for 7/8, 1 inch or X-Bar tubular handlebars with an inner diameter of 12 to 22 mm. The cables are routed in the handlebars and are a good length at approx. 100 cm. Look forward to the HIGHSIDER AKRON-FLASH LED handlebar end indicators, which are by no means commonplace. Make your mark - with the innovative blinker series from HIGHSIDER, you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:Width: 36 mmDiameter: 34.5 mmCable length: approx. 1000 mm Angle of the light modules continuously adjustable by 26°. Connections: Power consumption: 13.5 V, 0.26 A, 3.5W Yellow cable = blinker (+) Black cable = earth (-) Scope of delivery: 1 pair 2 x clamping sleeves Ø 13 mm, Ø 16 mm3 x centering ring2 x central screw M6 with fastening ring for the HIGHSIDER AKRON-FLASH, and cone nut M6. Note: Resistors or a flasher relay may be required for correct flashing.
HIGHSIDER Pro Akron-Flash LED Bar End Indicator Housing Black-Titanium / Lens Orange (Pair), Front
HIGHSIDER AKRON-FLASH LED handlebar end indicators, E-approved as front direction indicator - attractive handlebar end with flashing function - With these handlebar end indicators, HIGHSIDER once again demonstrates a real flair for outstanding design and top functionality. The ultra-bright, adjustable flashing angle indicator lights of the latest generation from HIGHSIDER provide unmistakable directional indication. The handlebar end indicators with tinted glass, high-quality CNC-milled aluminum housing and characteristic cap are simply beautiful. Packaged so harmoniously, the front direction indicators literally disappear from the vehicle when not in use. Easy to fit thanks to the clamping system with various sleeves. Universal fit for 7/8, 1 inch or X-Bar tubular handlebars with an inner diameter of 12 to 22 mm. The cables are routed in the handlebars and are a good length at approx. 100 cm. Look forward to the HIGHSIDER AKRON-FLASH LED handlebar end indicators, which are by no means commonplace. Make your mark - with the innovative blinker series from HIGHSIDER, you not only show where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:Width: 36 mmDiameter: 34.5 mmCable length: approx. 1000 mm Angle of the light modules continuously adjustable by 26°. Connections: Power consumption: 13.5 V, 0.26 A, 3.5W Yellow cable = blinker (+) Black cable = earth (-) Scope of delivery: 1 pair 2 x clamping sleeves Ø 13 mm, Ø 16 mm3 x centering ring2 x central screw M6 with fastening ring for the HIGHSIDER AKRON-FLASH, and cone nut M6. Note: Resistors or a flasher relay may be required for correct flashing.
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights silver (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Apollo Bullet LED rear light, brake light, blinker black/toned 3in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 3in1 LED rear light, brake light, blinker, for rear E-approved. LED rear light, brake light, blinker unit in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Saving the best for last - be seen in safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster Dimensions:A: 22 mmB :34 mmD: 40 mmThreaded bolt: M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+) Scope of delivery: 1 pair
