alpha Technik Kennzeichenhalter Ducati Streetfighter 848; Typ F1; Modelljahr 2012-2015
alpha Technik Kennzeichenhalter Ducati Streetfighter 848; Typ F1; Modelljahr 2012-2015 alpha Technik Kennzeichenhalter für Ducati Streetfighter 848, Typ F1, Modelljahr 2012 - 2015 mit Rückstrahler und Kennzeichenbeleuchtung. Nur zur Verwendung mit Zubehör-Blinker. Produktkennzeichnung: Kennzeichenhalter Hinweis: Verwendung nur mit Zubehörblinker(d=8,2mm) möglich Geänderte Fahrzeugteile: Kennzeichenhalter, Halter Rückstrahler/Blinker Produkt Typ: Kennzeichenhalter Ducati Streetfighter 848, Typ F1 Lieferumfang: Kennzeichenhalter, Adapter für Zubehörblinker Adapterkabelsatz mit integrierten Widerständen für Zubehör-LED-Blinker (Paar), 27 Ohm / 5 W, Adapter Rückstrahler, LED-Kennzeichenbeleuchtung inkl. Gehäuse
Arrowhead starter
Bihr starter motors are a reliable alternative to original equipment. Starter motor according to series type Mounted in place of the defective component
ATHENA Top End cylinder gasket set
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer make it possible to improve engine performance and maintain its reliability at the same time.Cylinder gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauled
ATHENA Valve cover gasket - Ducati
ATHENA : High-performance gaskets to improve engine efficiency without compromising reliability For a renewal of the highest quality The gasket must be replaced with every overhaul
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium blau eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
Barracuda Windschild Aerosport Plexiglas für Ducati StreetFighter 1100 / Ducati StreetFighter 848
Barracuda Windschild Aerosport Plexiglas für Ducati StreetFighter 1100 / Ducati StreetFighter 848 Barracuda Windschild Aerosport, für Ducati StreetFighter 1100 und für Ducati StreetFighter 848 Produktkennzeichnung: Barracuda Verkleidungsscheiben Produkt Typ: Windschild Plexiglas Ducati StreetFighter
Blinker front left / rear right for: DUCATI MONSTER
Dimensions and properties identical to standard component.
Blinker, front right / rear left for: DUCATI MONSTER
Dimensions and properties identical to standard component.
BMC Racingluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018
BMC Racingluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018 BMC Racingluftfilter für Ducati 848 EVO/S (Modelljahr 2008-2013) 1098 S/R (Modelljahr 2007-2009) 1198 S/R/SP (Modelljahr 2009-2011) Diavel 1200 (Modelljahr 2011-2018) Multistrada 1200/S (Modelljahr 2010-2014) Streetfighter 1100/848 S (Modelljahr 2009-2015) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Racingluftfilter für Ducati
BMC Sportluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018
BMC Sportluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018 BMC Luftfilter für Ducati 848 EVO/S (Modelljahr 2008-2013) 1098 S/R (Modelljahr 2007-2009) 1198 S/R/SP (Modelljahr 2009-2011) Diavel 1200 (Modelljahr 2011-2018) Multistrada 1200/S (Modelljahr 2010-2014) Streetfighter 1100/848 S (Modelljahr 2009-2015) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Luftfilter für Ducati
Electrosport regulator - Ducati
ElectroSport regulators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Factory Links Race Series wheel bearing set
FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for on and off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Factory Links steering head bearing kit
Our premium kits contain all the elements required for a complete OEM quality service for your handlebar stem. Our special off-road design of tapered ball bearings and dust balls are specially manufactured to meet stringent OEM quality requirements in terms of materials, dimensional tolerances, hardness and surface roughness. Our kits restore your bicycle handlebar stem to the condition defined by the manufacturer.
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
Gilles brake lever FACTOR-X-LEVER
Gilles brake lever for various Aprilia, Ducati, Kawasaki, KTM and Triumph models. Optimal design for all brake styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
HIGHSIDER pro X-Bar Superbike Flat XN1 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Black Bead-Shallow, Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 Handlebar Silver Aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Superbike X01 handlebars black glossy, aluminum, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart adapter cable for indicators, For Ducati (pair)
Adapter cable for connecting accessory indicators with 3.5 mm round plugs to the original wiring harness of your bike.Suitable for various Harley models. - For quick and easy blinker conversion without soldering or crimping. - Avoids removing the socket from the original wiring harness. - Can therefore be retrofitted with the original indicators at any time.Scope of delivery: 1 pair
