Givi Universal lower part for belt attachment Ducati
of tank bagsTank Fitting SystemThe new Universal TFS (Tank Fitting System) is suitable for all plastic tanks and allows the installation of the following GIVI tank bags: T463 - T481 - T470 - T478 - T475 - T400NN - T410 - T432 - T434 - T438N - T452 - T456.
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, Alu, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: aluminumColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front left, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 Volt DC wiring systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front leftExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front right, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt DC electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front rightExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VL/HR, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VR/HL, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, chrome matt, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: mattShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-testedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
SW-Motech Navi mount 1" ball kit for Ducati Streetfighter V4 /S /SP - SW Motech
The 1" ball kit allows navigation devices to be attached to handlebars with a diameter of 22, 28 mm or 1 inch by means of a mounting clamp. A clamping arm can be mounted on the ball adapter, which allows variable postioning of the navigation device. Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Streetfighter V4 (19-), FA Ducati Streetfighter V4 (20-), 1F Ducati Streetfighter V4 S (19-), FA Ducati Streetfighter V4 S (20-), 1F Ducati Streetfighter V4 SP (21-), 1F Details
SW-Motech Navi mount kit for GoPro camera for Ducati Streetfighter V4 /S /SP - SW Motech
And action! The GoPro HD HERO camera models combine robustness, versatility and an amazingly high image quality for the housing size. This makes the compact digital camera ideally suited for use on the motorcycle. SW-MOTECH supplies a versatile universal mount that comes as a complete set with a wide range of mounting options for the current generation of action cameras. Mounting options include a mirror thread mount and mounts with M6 or M8 ball as well as clamps for tube diameters of 22 and 28 mm and 1 inch. The swiveling RAM arm facilitates precise positioning of the camera to align the image section exactly to the rider's needs. SW-MOTECH universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Complete set for mounting a GoPro HD camera For GoPro HD HERO and GoPro HD Session Numerous mounting options Can be used on almost any motorcycle model Mounting clamps made of strong, fiberglass-reinforced plastic For mounting, for example, on handlebars, frames or crash bars with tube diameters of 22 mm, 28 mm or 1 inch Can also be mounted in the handlebar receptacle Can also be mounted directly on M6 or M8 threads Balls and 2 inch clamping arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Streetfighter V4 (19-), FA Ducati Streetfighter V4 (20-), 1F Ducati Streetfighter V4 S (19-), FA Ducati Streetfighter V4 S (20-), 1F Ducati Streetfighter V4 SP (21-), 1F Details
SW-Motech Navi mount kit T-Lock with Navi Case for Ducati Streetfighter V4 /S /SP - SW Motech
This all-round carefree package includes a weatherproof Navi Case device bag and various fastening elements. The T-Lock mount on the back of the Navi Case allows quick attachment to the Universal Navi Kit: A quarter turn clockwise fixes the Navi Case to the clamp arm.This Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Splash-proof and touch-compatible Navi Case device pouch with sun visor For devices in landscape format Inside dimensions Navi Case: 171 x 114 mm Outer dimensions Navi Case: 185 x 125 mm Viewing window size Navi Case: 155 x 98 mm T-Lock holder for quick attachment to clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch
SW-Motech Navi mount kit T-Lock with Phone Case for Ducati Streetfighter V4 /S /SP - SW Motech
This all-round carefree package includes a weatherproof Phone Case device bag and various fastening elements. The T-Lock mount on the back of the Phone Case allows for quick attachment to the Universal Navi Kit: a quarter turn clockwise fixes the Phone Case to the clamp arm.This Universal Kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted to either an M6 or M8 thread, to the mirror thread mount, or with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Splash-proof and touch-compatible Phone Case device pouch with sun visor For devices in portrait format Inner dimensions Phone Case: 83 x 171 mm Outer dimensions Phone Case: 95 x 185 mm Viewing window size Phone Case: 68 x 156 mm T-Lock holder for quick attachment to clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Streetfighter V4 (19-), FA Ducati Streetfighter V4 (20-), 1F Ducati Streetfighter V4 S (19-), FA Ducati Streetfighter V4 S (20-), 1F Ducati Streetfighter V4 SP (21-), 1F Details Total weight: approx. 0.6 kg Scope of delivery 1 x Phone Case 1 x mounting clamp with rubber inserts 1 x Ball with M8 thread and M6 adapter 1 x 2" clamping arm 1 x Ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material Note Whether all functions of the touch control panel can be used depends on the device model (e.g. fingerprint sensor) Suitable for the following models:SamsungA10, A12, A20S, A20E, A21S, A30S, A31, A32, A50, A51, A40, A41, A42, A50, A51, A70, A71, A90, M11, M20, M21, M30S, M31, M31S, M51Galaxy SeriesS5, S6, S6 Edge, S7, S7 Edge, S8, S8+, S9, S9+, S10, S10 Lite, S10e, S10+, S20, S20+, S20 FE, S20 Ultra, S21, S21+, S21 Ultra iPhone6, 6 Plus, 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max, 11, 11 Pro, 11 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, SE (2021) Xperia seriesXA2, XA2 Ultra, XA2 Plus, XZ, XZ Premium, XZ1, XZ1 Compact, XZ2, XZ2 Compact, XZ2 Premium, XZ3 , L1, L2, L3, L4, 1, 1 II, 5, 5 II, 10, 10 II, 10 Plus Huaweinova 5T, Mate Xs, Mate 20, Mate 20 X, Mate 20 lite, Mate 30, Mate 30 Pro, Mate 40 Pro, P smart, P smart+, P smart Z, P smart Pro, P30, P30 lite, P30 Pro, P40, P40 lite, P40 lite E, P40 Pro, P40 Pro+, Y5, Y5p, Y6, Y6p, Y6s, Y7 XiaomiMi 11, Redmi Note 8 Pro
SW-Motech Navi mount kit T-Lock with smartphone Drybag for Ducati Streetfighter V4 SP - SW Motech
This all-round carefree package includes a waterproof Smartphone Drybag and various fastening elements. The T-Lock mount on the back of the Smartphone Drybag allows quick attachment to the Universal Navi Kit: With a quarter turn clockwise, the Smartphone Drybag is fixed to the clamping arm. The waterproof Smartphone Drybag with large viewing window and an internal dimension of 160 x 80 mm is suitable for almost all common smartphones up to a size of 6.5 inches. This universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Suitable for smartphones up to 6.5 inches Internal dimensions: 160 x 80 mm Waterproof roll closure Water repellent coating T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Aprilia RSV 4 Tuono 1100 (21-), KZ Details Total weight: approx. 0.5 kg Scope of delivery 1 x Smartphone Drybag 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x 2" clamp arm 1 x ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material
SW-Motech Navi mount kit T-Lock with smartphone holder for Ducati Streetfighter V4 /S /SP - SW Motech
SW-Motech Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display is always in view without obscuring the view of the instruments. The included T-Lock holder with smartphone mount allows smartphones to be quickly attached to the Universal Navi Kit. With a quarter turn clockwise, the T-Lock holder can be fixed to the clamping arm. The silicone tightening straps of the smartphone holder allow devices of different sizes to be attached. For smartphones with maximum outer dimensions of 150 x 75 x 10 mm and minimum outer dimensions of 130 x 70 x 6 mm T-Lock holder for quick attachment to the clamp arm Smartphone mount with silicone clamping straps Balls and 2 inch clamp arm allow individual positioning Clamp arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Streetfighter V4 (19-), FA Ducati Streetfighter V4 (20-), 1F Ducati Streetfighter V4 S (19-), FA Ducati Streetfighter V4 S (20-), 1F Ducati Streetfighter V4 SP (21-), 1F Details
SW-Motech Navi mount kit T-Lock with smartphone holder large for Ducati Streetfighter V4 SP - SW Motech
SW-Motech Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display is always in view without obscuring the view of the instruments. The included T-Lock holder with smartphone mount allows smartphones to be quickly attached to the Universal Navi Kit. With a quarter turn clockwise, the T-Lock holder can be fixed to the clamping arm. The silicone tightening straps of the smartphone holder allow devices of different sizes to be attached. For smartphones with maximum outer dimensions of 165 x 80 x 12 mm and minimum outer dimensions of 144 x 71 x 7 mm T-Lock holder for quick attachment to the clamp arm Smartphone mount with silicone clamping straps Balls and 2 inch clamp arm allow individual positioning Clamp arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Streetfighter V4 SP (21-), 1F Details Total weight: approx. 0,5 kg Scope of delivery 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x holder for mounting on mirror thread 1 x 2" clamping arm 1 x ball joint with mounting plate 1 x T-Lock holder for smartphone Mounting instructions Mounting material
SW-Motech Navi mount kit X-Grip for large smartphones for Ducati Streetfighter V4 /S - SW Motech
This versatile kit is suitable for securely attaching a large smartphone to (almost) any motorcycle. The X-Grip clamp impresses with its versatility - it gives smartphones a secure hold and can be flexibly aligned on a clamp arm with the 1" adapter ball. The rubber fingers of the X-Grip clamp have a firm grip on the smartphone while allowing free view and access to the device. The included universal kit offers a variety of different mounting options. The included 1" ball can be mounted to either an M6 or M8 thread, mirror thread mount, or with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. The clamp arm, which we developed, can be swiveled in two axes by up to 90° or 45°, making it easier to position in the cockpit - so the display is always in view without obscuring the view of the instruments. Versatile holder with 7.6 cm clamp arm and 1" adapter ball Rubber-covered retaining fingers for a secure hold A retaining rubber additionally secures the smartphone For smartphones with a width of 4.4 to 11.4 cm For smartphones with a maximum depth of 2.22 cm Suitable for the following vehicles Ducati Streetfighter V4 (19-), FA Ducati Streetfighter V4 (20-), 1F Ducati Streetfighter V4 S (19-), FA Ducati Streetfighter V4 S (20-), 1F Details Material: stainless steel / plastic Color: silver / black Total weight: approx. 0,6 kg Scope of delivery 1 x RAM X-Grip IV clamp for large smartphones 1 x holding rubber 1 x clamp arm 1 x mounting clamp 1 x ball adapter 1 x mounting plate for mirror thread Mounting instructions Mounting material Note Particularly narrow devices (with minimum width 4.4 cm) must be higher than 14.6 cm The use of a waterproof protective cover is recommended. The smartphone with protective cover must not exceed the specifications for maximum width and depth.
