ADAPTER TYPE 3 FOR TANK BAG QUICK FASTENING
Tank ring to enable the fitting of Oxford QR quick release bags to your motorcycle tank. Made from 304 grade stainless steel deburred and shot basted to give a professional high quality feel. Please see attached fitting list to select your Type - Type 1 to 6 available
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
ATHENA Top End cylinder gasket set
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer make it possible to improve engine performance and maintain its reliability at the same time.Cylinder gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauled
EK 525 DEX, extra reinforced, pitch 525, with hollow rivet lock, length 108 links
Cost-effective Quadra-X-Ring chain for motorcycles with high tensile strength and smooth-running properties: - 520 DEX for on- and off-road motorcycles up to 500 cc- 525 DEX for on- and off-road motorcycles up to 750/650 cc- 530 DEX for on- and off-road motorcycles up to 900/750 cc The developers at Enuma Chain Manufacturing Ltd have solved the balancing act between high quality and low price in an ideal way. The extra-reinforced DEX chain is equipped with the patented Quadra-X rings. The QX rings hold the lubricant perfectly between the moving parts of the chain, providing excellent protection against wear with very low internal friction. The high manufacturing quality and the material used give the DEX a higher breaking load at a lower weight than many comparable chains from other manufacturers. In addition, the chain is manufactured using "Zero Stretch Technology", a controlled stretching process during production. When riding, this results in extremely low stretch and protects the sprocket, chain and chain wheel. The DEX also scores with a very good price-performance ratio.
EK 525 Z ThreeD QX2 X-Ring Premium chain - 108 links
Chain ENUMA QX-Ring-Chain 525Z ThreeD, ultra reinforced, pitch 525, length 108 links, color standard (steel grey), incl. hollow rivet lock ThreeD (3D) motorcycle chains are elegant, stable, detailed and lightweight. ThreeD chains combine flexibility and strength without losing sight of the design. QX2 X-rings have better wear resistance and increase performance by around 30% compared to standard SX2 rings, resulting in approx. 1% more power at the rear wheel. Features:- The low-weight, smooth-running chain is suitable for use on the road and race track- Maximum performance thanks to reduced friction thanks to QX2 ring technology- Approx. 10% weight saving compared to equivalent high-end chain thanks to 3D plate shape- Available in 520, 525 and 530 pitches- Color: see item description Dimensions:- Inner plate 2.4 mm / outer plate 2.4 mm- Pin diameter 5.38 mm- Total width 23.1 mm- Weight per 100 links 1.90 kg- Tensile strength 4,500 kg
EK Chain ZVX-3 525 ultimate sport bike chain - 108 links
Chain ENUMA NX-ring chain ZVX-3, ultra reinforced pitch 525, length 108 links, color standard (steel grey), incl. full rivet lock ZVX-3 chain - the premier class of motorcycle chainsImproved sealing ring technology: The NX ring increases durability by a further 15% compared to the Quadra-X ring and reduces friction for smooth running of the chain and the best possible power transmission and development of the engine. With revolutionary zero-stretch technology: the drive chain hardly stretches at all during the running-in procedure, as is usual with other chains. Retensioning is therefore almost unnecessary at the beginning. This chain is therefore perfect for road riding and racing, as several turns can be completed with one adjustment. With perforated inner plate: Not just a weight saving! The lightening holes increase the stability of the chain enormously. Heat is dissipated better and dirt is removed from the chain links faster and more effectively, which in turn leads to significantly less wear on the sprocket and pinion. Especially recommended for powerful motorcycles from 600cc upwards.Rivet lock included. Use of screw lock possible (please order separately! No riveting tool required for installation). Dimensions:- Inner link 2.4 mm / outer link 2.6 mm- Pin diameter 5.38 mm- Total width 23.1 mm- Weight per 100 links 2.05 kg- Tensile strength 4,900 kg
ENUMA 525 HO chain for motorcycles up to 500cc - 108 links
ENUMA 525 HO chain, pitch 525, length 108 links, reinforced, O-ring sealed, incl. clip lock, full rivet and hollow rivet lock The reinforced version of a conventional O-ring chain. The inner part of the O-ring chain is filled with permanent grease and sealed against the outer part of the chain by an O-seal ring. Lubrication is improved and dirt remains outside. This results in a considerably higher mileage of the motorcycle chain set and less maintenance.Recommended for motorcycles up to 500cc, especially for enduro bikes. Dimensions:- inner plate 2.4 mm / outer plate 2.4 mm- pin diameter 5.24 mm- total width 22.5 mm- weight per 100 links 1.56 kg- tensile strength 3,500 kg
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*: 15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70 *Evtl. oEM reference number listed is for comparison purposes only!
HIGHSIDER pro 45 mm headlight Dual-Stream LED black E-approved (1pc)
HIGHSIDER DUAL-STREAM LED headlight, black, E-approved The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing and robust bracket. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoid lens and the shutter technology with which a mechanical shutter switches between high and low beam. By using this modern LED technology, the smallest possible housing dimensions can be achieved with the greatest possible light output. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions:Lens diameter: approx. 45 mmHeight: 70.2 mmWidth: 67 mmDepth: 96.5 mmDistance between mounting holes: 67 mmLateral mounting holes: M 5 mmHousing material: aluminumWeight: 0.230 kg Power consumption:12V / 12W, 739.3 lm, low beam12V / 19 W, 739.3 lm, high beam Connections:Position light = brownLow beam = whiteThe white cable is connected to ignition plus (+) High beam = blueGround = green (-)
HIGHSIDER pro 5 3/4 inch headlight insert type 10 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 10 with parking light, E-approved Dimensions:Diameter A = 145 mmDiameter GA = 132 mmDiameter I = 125 mmT = 60 mmR = 10 mmCable length: 210 mm Weight: 658 gConnections: (3 pin plug) Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 5 3/4 inch Type 12 LED headlight insert With daytime running light
HIGHSIDER TYPE 12 LED headlight insert, round with chrome-plated reflector and black cover, 5 3/4 inch, E-approvedHigh beam, low beam, parking light and daytime running light function.Dimensions:Ø A = 145 mmØ GA = 133 mmØ I = 129 mmT = 70 mmR = 10 mmWeight: 650 gConnections:(3 pin plug) Red = low beam (+) White = high beam (+) Black = ground (-) Blue = TFL (+) Brown = position light (+) Cable length: 300 mm Scope of delivery:1 x LED headlight insert1 x connector housing
HIGHSIDER pro 7 inch headlight insert type 11 LED black E-approved (1pc)
HIGHSIDER TYPE 11 7-inch LED main headlight insert, E-approved High beam, low beam, parking light and with TFL (daytime running light) function The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic See and be seen! This is extremely important for motorcyclists. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give your motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, then the LED main headlight is an excellent choice. The built-in LED daytime running light in TYPE 11 is the perfect way to improve visibility during the day. The ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizingly unique look. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight! Dimensions: A diameter = 170 mm GA Diameter = 165 mm I diameter = 160 mm T = 60 mm R = 9 mm Total depth from glass to cooling fins: 96 mm Cable length: 170 mm Connections: Power input: 3 pin connector Black cable = ground (-) White cable = low beam (+) Blue cable = high beam (+) TFL: Black cable = earth (-) Brown cable = daytime running light (+) Gray cable = parking light (+) Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 4 LED E-approved (1pc)
This round, chrome-plated reflector with clear glass has a high beam, low beam, parking light and daytime running light function. The daytime running light and position light are installed in a central strip, creating a very attractive light pattern - the low beam shines above the strip, while the high beam shines below it. The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic - and is E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W Yellow cable = high beam (+), power consumption at 12V: 1.3A, 13W Black cable = ground (-) TFL: Black cable = ground (-) Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W White cable = position light (+), power consumption at 12V: 0.2A, 2.4W Scope of delivery: 1 piece Note 1: - Asymmetrical use, only approved for right-hand traffic. - The enclosed 3-pin standard plug must be fitted by the customer after the reflector has been installed. View of plug contacts: High beam (yellow) = right Low beam (blue) = top Ground (black) = left Note 2: The daytime running light can also be used on vehicles without a light switch. This requires the following components, for example: Switch: Art. No. 240-044 HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER pro 7 inch headlight insert type 8 LED black E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 8- See and be seen! -Of the utmost importance for motorcyclists. The built-in LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light circuit on the vehicle is provided without additional control boxes or switches, complies with regulations and simplifies installation. Modern LED lighting technology has made huge progress in the headlight sector. An LED bend lighting headlight for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlamp with bend lighting offers clear advantages over a conventional headlamp. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Thanks to the improved illumination, you can see more of the bend and what is behind it. The rider can adjust better to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlight is available in black with tinted glass or in chrome with clear glass. The HIGHSIDER LED headlamp with daytime running light, position light and cornering light is of course E-approved. To switch from daytime running light to dipped beam: Press the high beam/flasher button briefly (approx. 1 second) and release the button as soon as the dipped beam is active. The low beam is then permanently active. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight!Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmConnections:Power input: 3-pin plugRed cable = low beam (+)White cable = high beam (+)Black cable = earth (-)Separate cable (round plug):Red cable = LED position light (+)Scope of delivery: 1 pieceNotes:The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. This resistor prevents the parking light error message.This headlight does NOT work in conjunction with the HIGHSIDER E-BOX TYPE 1 (item number: 208-200)
HIGHSIDER pro 7 inch headlight insert type 8 LED chrome E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 8- See and be seen! -Of the utmost importance for motorcyclists. The built-in LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light circuit on the vehicle is provided without additional control boxes or switches, complies with regulations and simplifies installation. Modern LED lighting technology has made huge progress in the headlight sector. An LED bend lighting headlight for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlamp with bend lighting offers clear advantages over a conventional headlamp. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Thanks to the improved illumination, you can see more of the bend and what is behind it. The rider can adjust better to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlight is available in black with tinted glass or in chrome with clear glass. The HIGHSIDER LED headlight with daytime running light, position light and cornering light is of course E-approved. To switch from daytime running light to dipped beam: Press the high beam/flasher button briefly (approx. 1 second) and release the button as soon as the dipped beam is active. The low beam is then permanently active. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight!Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmConnections:Power input: 3-pin plugRed cable = low beam (+)White cable = high beam (+)Black cable = earth (-)Separate cable (round plug):Red cable = LED position light (+)Scope of delivery: 1 pieceNotes:The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. This resistor prevents the parking light error message.This headlight does NOT work in conjunction with the HIGHSIDER E-BOX TYPE 1 (item number: 208-200)
HIGHSIDER pro 7 inch main headlight Frame-R1 Type 11 LED Black Lower mounting, E-approved (1S
HIGHSIDER FRAME-R1 TYPE 11 LED main headlight 7 inch, E-approved - Mounting WITHOUT housing, a light comes on. - Every centimeter counts when it comes to positioning the headlight as closely as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give your motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, then the FRAME-R1 LED main headlight is an excellent choice. The built-in LED daytime running light in TYPE 11 is the perfect way to improve visibility during the day. The ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlamp is available with bottom or side mounting. Two different mounting systems are available for variable attachment of the headlamp. - Side mount, the conventional screw connection on the side of the lamp holder - Bottom mount, attachment at the bottom for bolting to the fork bridge The side-mount holders can be mounted in three positions, compensating for 32 mm in installation depth and 46 mm in width. Features: - Round 7 inch headlight with CNC mounting ring and mounting kit - Installation WITHOUT a headlight housing - Improves cooling - Many installation options - Flat installation - Modern look, stylish and innovative - Clear glass - Black reflector - The reflector emits an asymmetrical luminous flux that is only approved for right-hand traffic - High beam, low beam, parking light and daytime running light function - E-approved, nothing needs to be registered Give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: A diameter = 170 mm GA diameter = 165 mm I diameter = 160 mm T = 60 mm R = 9 mm Total depth from glass to cooling fins: 99.10 mm Connections: Power input: 3 pin connector Black cable = earth (-) White cable = low beam (+) Blue cable = high beam (+) TFL: Black cable = earth (-) Brown cable = daytime running light (+) Gray cable = parking light (+) Scope of delivery: 1 piece
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
