HIGHSIDER pro distance bar black set 25mm
Handlebar spacers for Ø 22.2 mm handlebar diameters available in various colors and heights.Easy to raise the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro distance block silver set 25mm
Handlebar spacers for Ø 22.2mm handlebar diameter available in various colors and heights.Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro footpegs silver For Honda (pair)
Footrests wide, HONDA style, pair. Bore 8 mm, distance for joint 10 mm. The contact surface of the footrest is wider than 310-302. For example for the following models: CB 500, CB600F Hornet 98-01, CBR 600/1000 F, NTV 650, CB 750 RC42, VFR 800 98-01, CBR 900 RR 92-97, CB900F Hornet 02-07, VTR 1000F, CBR 1100 XX 97-98.
HIGHSIDER pro Naked Bike A02 handlebar aluminum black, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Naked Bike A02 Handlebar Silver Aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the manufacturing quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro developed the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Naked Bike L02 handlebar steel black
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Naked Bike L02 handlebars steel chrome
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER smart handlebar weights black For various Honda OEM style (pair)
HIGHSIDER smart handlebar weight made of aluminum. Suitable for various Honda original handlebars. Dimensions:Diameter: 31 mmLength: 22 mmThread: M6 x 1.25 mmScope of delivery: 1 pair
HIGHSIDER smart Type BC 014 Repair Brake Lever Silver With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart brake levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right clutch lever, you are sure to find it in our bike finder.
HIGHSIDER smart Type BC 111 Repair Clutch Lever Black With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart clutch levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right brake lever, you are sure to find it in our bike finder.
HIGHSIDER smart Type BC 111 Repair clutch lever silver With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart clutch levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right brake lever, you are sure to find it in our bike finder.
IXIL stainless steel muffler HEXOVAL XTREM Evolution for Honda CB 500 / S (Bj.93-04)
Stainless steel silencer, E-approved.All IXIL mufflers have a high-quality finish with stainless steel interior in common. Combined with the available outer shells made of, black painted or brushed stainless steel, you get a visually and technically high-quality silencer. Super optics and deep, rich sound meet all customer requirements. E-tested, of course. All IXIL silencers are supplied as bolt-on or slip-on replacement silencers. Included in delivery are all parts needed for mounting. Suitable for the following vehicles: ManufacturerModelChassis numberYear of manufacture fromYear of manufacture until Honda CB 500 PC26 1994 1996 Honda CB 500 PC32 1996 1999 Honda CB 500 PC32 2000 2003 Honda CB 500 S PC32 1998 1999 Honda CB 500 S PC32 2000 2003 Tailpipe diameter: 130 x 100 mmTailpipe length: 393 mmWeight: 2.1 kgShape: hexovalNote: Without noise killer the operating permit expires.
MM Plastic Plate Kit Complete for F-TRÄGER Givi
for monolock top case / Max. Load capacity 3 kg Compatible with any Monolock case With aluminum ball joint for mounting on topcase carrier system Mounting of brake light kit (NOT FOR GERMANY) and/or remote control possible Maximum load: 3 kg
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
SHAD Seitentaschen Halter Honda
Shad Side Bag Holder, passend für Seitenkoffer und Taschen entsprechend Ihrem Fahrzeug.
Tank protector with Honda Wing logo Original for all Honda models
Tank protector with Honda Wing logo Original for all Honda models
Tecnium Blue Label set of fork dust caps - Showa 37x50,4x11
Kit sealing ring & dust cap high quality TECNIUM by KOK. High performance kit Excellent sealing performance Excellent service life Resistant to extreme conditions Composition of the kit (suitable for one fork leg):1 fork seal1 dust cap
Tecnium clutch cable
With their braiding made of highly resistant and supple steel, they combine safety and reliability. The sheaths are fitted with nylon inserts for more comfortable control.
