ADAPTER TYPE 3 FOR TANK BAG QUICK FASTENING
Tank ring to enable the fitting of Oxford QR quick release bags to your motorcycle tank. Made from 304 grade stainless steel deburred and shot basted to give a professional high quality feel. Please see attached fitting list to select your Type - Type 1 to 6 available
alpha Technik Bremsscheibe ABD33 hinten
alpha Technik Bremsscheibe ABD33 hinten alpha Technik Bremsscheibe ABD33 (Da=240 mm, Di=116,3 mm, Lochkreis=136 mm), hinten, Außenring Stahl gelocht, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 hinten
alpha Technik Gabelwellendichtring Satz 41x54x11
alpha Technik Gabelwellendichtring Satz 41x54x11 ARI Simmerringsatz, Gabelwellendichtringe 41x54x11, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41x54x11
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
Alurack top case carrier black for Honda CB 600 F Hornet (07-10) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 3.3 kg Color: black Scope of delivery Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
ARROW exhaust DARK THUNDER aluminum black for Honda CB600F 2007-2013
ARROW DARK THUNDER rear silencer with black anodized aluminium shell and carbon end cap, without dB-killer insert, with road approval.For HondaCB600F Hornet, type PC41, model year 2007-13CBR600F, type PC41, model year 2011-13 The demand for ever smaller exhaust systems and the fact that the rear silencers are often located in "difficult" places presented Arrow with a new challenge. The result was the Street Thunder series: the perfect mix of innovative design and state-of-the-art technology.During development, Arrow drew on its experience in off-road motorsport and once again chose the diamond shape for the best performance. The Street Thunder series is available with aluminum / titanium / or carbon covers and the end caps are available in stainless steel or carbon. Despite the reduced overall volume of the exhaust, Arrow has managed to combine the perfect sound with the necessary thermal insulation. Countless tests and new production techniques were necessary for the implementation.The modern Street Thunder rear silencers enhance the look of your bike and are easy to fit.
ATHENA valve cover gasket
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability.Rocker arm cover gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauledSupplied without screw gaskets
Barnett kit clutch springs
BARNETT Reinforced Clutch Spring Kit
Barracuda Kennzeichenhalter für Honda Hornet 600 2007 - 2010
Barracuda Kennzeichenhalter für Honda Hornet 600 2007 - 2010 Barracuda Kennzeichenhalter für Honda Hornet 600, Modelljahr 2007 - 2010, nur für Fahrzeuge ohne ABS Aluminium schwarz eloxiert, zur Verwendung mit Zubehörblinkern, Lieferung ohne Kennzeichenbeleuchtung und Reflektor Produktkennzeichnung: Barracuda Kennzeichenhalter Produkt Typ: Kennzeichenhalter Honda Hornet 600
Barracuda Kühlerverkleidung, für Honda CB600F Hornet 2007-2013
Barracuda Kühlerverkleidung, für Honda CB600F Hornet 2007-2013 Barracuda Kühlerverkleidung, schwarz unlackiert, für Honda CB600F Hornet Modelljahr 2007-2013 Produktkennzeichnung: Barracuda Verkleidungsteile Produkt Typ: Kühlerverkleidung Honda CB600F Hornet
BARRACUDA Superbike Lenker Aluminium 22 mm rot
BARRACUDA Superbike Lenker Aluminium 22 mm rot Barracuda Superbike Lenker 22mm, Aluminium rot eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium blau eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
Blinker, front right / rear left
Dimensions and properties identical to standard component.
Blinker, front right / rear left
Dimensions and properties identical to standard component. For vehicles that are not equipped with LEDs as standard, please connect the resistor between the relay and blinker,323099 so that the correct output is achieved.
C-Bow side carrier black for Honda CB 600 F Hornet (07-10) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 1.8 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
