3-Liter Tank Bag Set for Honda CB 500 F / CBR 500 R (19-) / CB 500 Hornet Original
Practical tank bag with a transparent compartment on top for convenient smartphone storage. This tank bag does not affect your bike's handling in any way. A rain cover is also included. Features: The bag has a capacity of 3 liters Transparent compartment for a smartphone on the top Rain cover included Dimensions (WxLxH): 178 x 285 x 130 mm
3L Original Honda Tank Bag Mounting Kit
The mounting kit is perfectly tailored to your Honda and can be installed quickly and easily. This lets you focus entirely on your ride and means you no longer have to worry about the best way to transport your belongings. Thanks to the high-quality craftsmanship and materials, you can count on a long service life and high stability. The mounting kit is sturdy and can withstand even heavy loads. This means you can use it time and time again without worrying about it wearing out quickly. This mounting kit is required for installing the 3L fuel tank bag (sold separately).
Alurack top case carrier anthracite for Honda CBR 500 R (19-23) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 3.6 kg Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
ARROW Exhaust INDY RACE EVO DARK Slip-On Aluminum for Honda CBR 500 R (24-)
ARROW INDY RACE EVO DARK slip-on rear silencer with black aluminum cover and carbon end cap, with road approval according to EU regulation for Honda CBR500R, type PC70, model year 2024- Installation on original or Arrow Racing manifold AR-71794MI Arrow Exhaust has updated its INDY RACE product range and launched it on the market with a new look and improved technical features: INDY RACE EVO has been created. One of the most distinctive Arrow silencers has been renewed to become an absolute, versatile icon that can be used on any type of motorcycle. The typical shape, modeled on the oval of the famous American racetracks (hence the name INDY), has been reworked to incorporate some new features, such as the notch on the side, which gives the silencer a fantastic look and increases its robustness and rigidity. New carbon end caps are available alongside the end caps already available for the INDY-RACE range to match the design of the silencer to any motorcycle. Many INDY-RACE silencers are still available with the "old" stainless steel cap with external curved outlet pipe. Features:- Materials and surfaces of the silencer body in titanium in satin finish or in "TITAN DARK", or in transparent anodized aluminium or as "DARK" version (see article description)- Internal structure in stainless steel alloy- End cap in carbon or stainless steel ("old" style with external, curved outlet pipe)- Side notch- Available for racing or with road approval (see article description)- Laser-engraved Arrow logo
ARROW Exhaust PRO RACE DARK Slip-On NiChrome black for Honda CBR 500 R (24-)
ARROW PRO-RACE DARK slip-on rear silencer in megaphone shape with black NiChrome cover and stainless steel end cap. with road approval, for HondaCBR500R, type PC70, model year 2024- Mounting on original or Arrow Racing manifold AR-71794MI MotoGP set a new trend with exhaust systems in a conical shape. The great demand for similar exhaust systems in the hobby racing sector led Arrow to develop the Pro-Race series. The silencer combines a conical section with a cylindrical end piece and has a welded-on bracket. The conical shape promises a significant reduction in dimensions and weight and also reduces the overall volume of the rear silencer compared to standard systems. As with all Arrow exhaust systems, the elaborate TIG welding process is also used here - the result is first-class power delivery and a visually appealing exhaust.
ARROW Exhaust PRO RACE Slip-On NiChrome for Honda CBR 500 R (24-)
ARROW PRO-RACE slip-on rear silencer in megaphone shape with NiChrome cover and stainless steel end cap. with road approval, for HondaCBR500R, type PC70, model year 2024- Mounting on original or Arrow Racing manifold AR-71794MI MotoGP set a new trend with exhaust systems in a conical shape. The great demand for similar exhaust systems in the hobby racing sector led Arrow to develop the Pro-Race series. The silencer combines a conical section with a cylindrical end piece and has a welded-on bracket. The conical shape promises a significant reduction in dimensions and weight and also reduces the overall volume of the rear silencer compared to standard systems. As with all Arrow exhaust systems, the elaborate TIG welding process is also used here - the result is first-class power delivery and a visually appealing exhaust.
ARROW INDY RACE EVO Slip-On titanium cover for Honda CBR 500 R (24-)
ARROW INDY RACE EVO slip-on rear silencer with titanium sleeve and carbon end cap, with road approval according to EU regulation for HondaCBR500R, type PC70, model year 2024- Installation on original or Arrow Racing manifold AR-71794MI Arrow Exhaust has updated its INDY RACE product range and launched it on the market with a new look and improved technical features: INDY RACE EVO has been created. One of the most distinctive Arrow silencers has been renewed to become an absolute, versatile icon that can be used on any type of motorcycle. The typical shape, modeled on the oval of the famous American racetracks (hence the name INDY), has been reworked to incorporate some new features, such as the notch on the side, which gives the silencer a fantastic look and increases its robustness and rigidity. New carbon end caps are available alongside the end caps already available for the INDY-RACE range to match the design of the silencer to any motorcycle. Many INDY-RACE silencers are still available with the "old" stainless steel cap with external curved outlet pipe. Features:- Materials and surfaces of the silencer body in titanium in satin finish or in "TITAN DARK", or in transparent anodized aluminium or as "DARK" version (see article description)- Internal structure in stainless steel alloy- End cap in carbon or stainless steel ("old" style with external, curved outlet pipe)- Side notch- Available for racing or with road approval (see article description)- Laser-engraved Arrow logo
ARROW RACE-TECH aluminum exhaust for Honda CB500F 2019- / CBR500R 2019-
ARROW DARK RACE TECH rear silencer with black aluminum cover and stainless steel end cap. With dB-killer. With road approval.For HondaCB500F, type PC63, model year 2019-CBR500R, type PC62, model year 2019-Installation only in conjunction with intermediate pipe AR-71717MI RACE-TECH rear silencers were the first exhaust systems with a diamond or lozenge shape and replaced the elliptical shape of Arrow over the years. The new shape made it possible to significantly reduce the dimensions compared to the previous exhaust systems and still keep the cross-section the same. This results in an enormous weight saving without having to compromise on volume. The result is a crisp sound and top performance. The rear silencer is artfully finished using the TIG welding process. Features:- Crisp sound and top performance- Diamond shape: significantly reduces the size of the oval exhaust while maintaining the same volume
ARROW Racing Krümmer Edelstahl für Honda CBR500R 2024-
ARROW Racing Krümmer Edelstahl für Honda CBR500R 2024- ARROW Racing Krümmer aus Edelstahl, ohne Homologation für Honda CBR500R, Typ PC70, Modelljahr 2024- Zur Verwendung mit ARROW Endschalldämpfer AR-71980 oder Originalschalldämpfer. Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW Racing Krümmer Edelstahl
C-Bow side carrier anthracite for Honda CBR 500 R (19-23) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.7 kg Color: anthracite Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Easyrack top case carrier anthracite for Honda CBR 500 R (19-23) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 3.7 kg Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Gilles clutch lever FXL for Honda
Optimal shape for all grip styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
Grip heater incl. mounting kit for Honda CBR 500 R (19-) Original
Extremely slim heated grips with intelligent 360° heat distribution. They have an integrated control for maximum rider comfort and design integration and are 3-stage adjustable. An integrated circuit protects the battery from discharge. The mounting kit required for installation and Honda Bond (heat-resistant adhesive) are included.
High windshield tinted for Honda CBR 500 R (19-) Original
The high windshield tinted for Honda CBR 500 R (19-) Original provides the perfect wind protection and makes your rides even more pleasant. The tinted windshield is higher than the standard version and thus protects you optimally from wind and weather. In addition, it also looks stylish and gives your bike that little extra. The installation is very easy and can be done by yourself.Our windshield is specially made for the Honda CBR 500 R (19-) and fits perfectly on your bike. It is made of high quality material and thus guarantees a long life.
HIGHSIDER pro license plate holder Akron-RS Honda Without lighting
HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design.The model-specific holder of the HIGHSIDER AKRON-RS enables mounting on the original mounting points of your bike and thus replacement without further drilling or cutting. To prevent damage to cables, all sharp-edged feed-throughs are protected by a rubber membrane grommet. The license plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating.This ensures an optimum fit and durability.The stepless adjustment option allows you to position the plate as required without drilling. There is an additional locking screw to hold the plate in this position.The width of the blinker brackets on the HIGHSIDER AKRON-RS can be adjusted and are therefore suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of license plates. The 10 mm holes are slotted to the side to allow the indicators to be fitted without disconnecting them from the wiring harness.You can also individually adjust the position of the rear reflector using a slider. This makes it easy to adapt to the different versions of EU license plates.Two rubber washers are included to securely screw the license plate and reduce vibrations. Another rubber buffer supports the license plate on its underside.Details: - Model-specific bracket - Infinitely adjustable blinker holder - Slotted blinker holder for easy installation without cable separation - Infinitely adjustable reflector, E-approved - Suitable for European license plates - Infinitely adjustable tilt angle - Additional screw for optimum positional security - Simple fixing without additional work steps (e.g. drilling) 5 - Includes two rubber washers to securely screw on the license plate.E.g. drilling) - simple mounting of the license plate through slotted holesThe scope of delivery of the HIGHSIDER AKRON-RS includes - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate mounting plate - Adjustable blinker brackets - E-approved reflector with adjustable bracket - Installation instructions Notes: - If side reflectors are fitted to your original license plate holder, these must be refitted in a suitable position or replaced with new ones. - The special 280-979 blinker holder is optionally available for the original indicators. Tip: If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different versions, are certainly a good alternative.
HIGHSIDER pro turn signal adapter black For original turn signals, For license plate holder, For Honda (pair)
Turn signal adapter for HIGHSIDER AKRON and HIGHSIDER pro MANTIS license plate holderWith these turn signal adapters, the original LED turn signals can still be used on the license plate holder.Oblong hole approx. 16x32mmScope of delivery: 1 pair
IXIL HYPERLOW BLACK XL stainless steel muffler for Honda CBR 500 R / CB 500 F (Bj.19-)
Black twin-tube stainless steel muffler with aluminum end cap, Dualexit. E-tested with Euro 4 + Euro 5 approval.All IXIL mufflers have in common a high quality finish with stainless steel interior. Combined with the available outer shells made of black painted or brushed stainless steel, you get a visually and technically high-quality silencer. Super optics and deep, rich sound fulfill all customer wishes. E-tested, of course. All IXIL mufflers are supplied as bolt-on or slip-on replacement mufflers. Included in delivery are all parts needed for mounting. Suitable for the following vehicles: ModelChassis numberYear of manufacture fromYear of manufacture until CB 500 FA PC63A 2019 2021 CBR 500 R PC62A 2019 2021 CBR 500 R 2022 2022 Tailpipe diameter: 60 mmTailpipe length: 350 mmWeight: 2.4 kgShape: roundSurface: stainless steel black with aluminum end capDesign: mounting by clamp Suitable for vehicles homologated according to Euro 4.
IXIL RB rear muffler Honda CB 500 F /CBR 500 R, stainless steel black, E-approved, Euro4+5
The finish is convincing, all IXIL mufflers have in common a high-quality finish with stainless steel materials. Combined with the available outer shells in stainless steel painted black, you get a visually and technically high-quality silencer. All IXIL mufflers are supplied as a complete system, bolt-on or slip-on exchange muffler. Of course, all parts required for mounting are included in the delivery. Super optics and deep rich sound fulfill all customer wishes. Technical features:- Stainless steel AISI304 exhaust system- Muffler with European certificate of conformity- Compliant with EURO4+5 standard- High quality TIG welds- Stainless steel rivets- Carbon shell- Stainless steel gas outlet with AFS system (Anti Flame System)- Supplied with matching kit Suitable for following Honda models: ModelChassis numberYear of manufacture fromYear of manufacture until CB 500 FA - 35 KW PC63A 2019 2021 CBR 500 R - 35 KW PC62A 2019 2021 CBR 500 R - 35 KW 2022 2022 Dimensions:Conical short exhaustWeight: 0,9 kgShape: roundScope of delivery: 1 piece
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
