ADAPTER TYPE 3 FOR TANK BAG QUICK FASTENING
Tank ring to enable the fitting of Oxford QR quick release bags to your motorcycle tank. Made from 304 grade stainless steel deburred and shot basted to give a professional high quality feel. Please see attached fitting list to select your Type - Type 1 to 6 available
alpha Technik brake disk ABD33 rear
alpha Technik brake disc ABD33 (Da=220 mm, Di=105.3 mm, bolt circle=125 mm), perforated steel outer ring, with ABE Developed for the toughest racing conditions, tested for resilience in the IDM and now available for you: the alpha Technik brake disc "aBD³³" - naturally with ABE. The look is more than just design. The openings in the friction ring have been specifically designed. The overlapping of the openings ensures constant cleaning of the contact surface between the brake pad and brake disk. This prevents the accumulation of dirt and optimizes the bleeding of outgassing brake pads. The brake pad lies evenly and evenly on the friction ring during the entire rotation. The contact surface also remains constant. This is made possible by the geometry and alignment of the ventilation openings. The even contact prevents one-sided wear of the brake pad, even under extreme loads. The harmonious loading of the pad prevents premature wear. The result is clear feedback to the rider, the braking process becomes more transparent and predictable and thus promotes confidence in your own braking system. Features:- Full floating disc*- Outer ring made of special steel- Plane-parallel grinding- Inner ring aluminum, CNC-milled- Optimum friction values- Even wear- Long service life- With ABE *Full floating disk depending on the vehicle (note article designation!)
alpha Technik brake disk Omega design ABD33, front
alpha Technik brake disc ABD33 floating (Da=296mm, Di=62,2mm, bolt circle=78mm, with offset), inner ring aluminium black anodized, outer ring steel with omega design, with ABE Developed for the toughest racing conditions, tested for load capacity in the IDM and now available for you: the alpha Technik brake disc "aBD³³" - naturally with ABE. The look is more than just design. The openings in the friction ring have been specifically designed. The overlapping of the openings ensures constant cleaning of the contact surface between the brake pad and brake disk. This prevents the accumulation of dirt and optimizes the bleeding of outgassing brake pads. The brake pad lies evenly and evenly on the friction ring during the entire rotation. The contact surface also remains constant. This is made possible by the geometry and alignment of the ventilation openings. The even contact prevents one-sided wear of the brake pad, even under extreme loads. The harmonious loading of the pad prevents premature wear. The result is clear feedback to the rider, the braking process becomes more transparent and predictable and thus promotes confidence in your own braking system. Features:- Full floating disc*- Outer ring made of special steel- Plane-parallel grinding- Inner ring aluminum, CNC-milled- Optimum friction values- Even wear- Long service life- With ABE *Full floating disk depending on the vehicle (note article designation!)
alpha Technik Drosselkit 25 kW für Honda CBR600F / Sport, PC35
alpha Technik Drosselkit 25 kW für Honda CBR600F / Sport, PC35 Gutachten 25 kW für Honda CBR600F / Sport, Fzg.Typ: PC35, ab Modelljahr 2001-, EG-BE-Nr.: e4*92/61*0101*, mit Umbauteilen -> Achtung: Nur für Einspritzer Modell Produktkennzeichnung: Leistungsänderung 25 kW Hinweis: Achtung: Nur für Einspritzer. EG-BE-Nr.: e4*92/61*0101* Inhaber der Führerscheinklasse A2: bitte beachten Sie die 11. Änderungsverordnung der 3. Fahrerlaubnisverordnung Geänderte Fahrzeugteile: Drosselblende + Gaswegbegrenzer Produkt Typ: Drosselkit 25 kW für Honda CBR600F / Sport, PC35 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung auf 25 kW mit vorgedrucktem Typenschildaufkleber
alpha Technik Drosselkit 25 kW für Honda CBR600F, PC35
alpha Technik Drosselkit 25 kW für Honda CBR600F, PC35 "Motorradland" Gutachten 25 kW für Honda CBR600F, Fzg.Typ: PC35, ab Modelljahr 2000, EG-BE Nr. e4*92/61*0101*01, von 78/80/81 kW, mit Umbauteil Produktkennzeichnung: Leistungsänderung 25 kW Hinweis: Nur für Modell mit Einspritzung. Auch für Fzg. Mit Katalysator! Inhaber der Führerscheinklasse A2: bitte beachten Sie die 11. Änderungsverordnung der 3. Fahrerlaubnisverordnung Geänderte Fahrzeugteile: MOTORRADLAND: Gaszuganschlag Produkt Typ: Drosselkit 25 kW für Honda CBR600F, PC35 Lieferumfang: TÜV Gutachten und Drosselteil für Leistungsreduzierung
alpha Technik Drosselkit 35 kW für Honda CBR600F / Sport, PC35
alpha Technik Drosselkit 35 kW für Honda CBR600F / Sport, PC35 Gutachten 35 kW für Honda CBR600F / Sport, Fzg.Typ: PC35, ab Modelljahr 2001-, EG-BE-Nr.: e4*92/61*0101*, mit Umbauteilen -> Achtung: Nur für Einspritzer Modell Produktkennzeichnung: Leistungsänderung 35 kW Hinweis: Achtung: Nur für Einspritzer. EG-BE-Nr.: e4*92/61*0101* Inhaber der Führerscheinklasse A2: bitte beachten Sie die 11. Änderungsverordnung der 3. Fahrerlaubnisverordnung. Geänderte Fahrzeugteile: Gaswegbegrenzer Produkt Typ: Drosselkit 35 kW für Honda CBR600F / Sport, PC35 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung auf 35 kW mit vorgedrucktem Typenschildaufkleber
alpha Technik Gabelwellendichtring Satz 41x54x11
alpha Technik Gabelwellendichtring Satz 41x54x11 ARI Simmerringsatz, Gabelwellendichtringe 41x54x11, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41x54x11
alpha Technik Gabelwellendichtring Satz 43x54x11
alpha Technik Gabelwellendichtring Satz 43x54x11 ARI Simmerringsatz, Gabelwellendichtringe 43x54x11, Feder unten mit Staublippe Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 43x54x11
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
Barnett kit clutch springs
BARNETT Reinforced Clutch Spring Kit
Blinker BIHR orange, front left for: HONDA CBR
Dimensions and properties identical to standard component.
Blinker BIHR orange, front right for: HONDA CBR
Dimensions and properties identical to standard component.
Blinker, front right / rear left
Dimensions and properties identical to standard component. For vehicles that are not equipped with LEDs as standard, please connect the resistor between the relay and blinker,323099 so that the correct output is achieved.
BMC Racingluftfilter für Honda CBR600F/Sport 1999-2002
BMC Racingluftfilter für Honda CBR600F/Sport 1999-2002 BMC Racingluftfilter für Honda CBR600F Typ: PC35 (ab Modelljahr 1999-´00) CBR600F Sport Typ: PC35 (ab Modelljahr 2001-´03) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Racingluftfilter für Honda CBR600F/Sport
BMC Sportluftfilter für Honda CBR600F/Sport 1999-2002
BMC Sportluftfilter für Honda CBR600F/Sport 1999-2002 BMC Sportluftfilter für Honda CBR600F Typ: PC35 (Modelljahr 1999-´00) CBR600F Sport Typ: PC35 (Modelljahr 2001-´03) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda CBR600F/Sport
C-Bow side carrier black for Honda CBR 600 F (99-10) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.0 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
EK 525 DEX, extra reinforced, pitch 525, with hollow rivet lock, length 108 links
Cost-effective Quadra-X-Ring chain for motorcycles with high tensile strength and smooth-running properties: - 520 DEX for on- and off-road motorcycles up to 500 cc- 525 DEX for on- and off-road motorcycles up to 750/650 cc- 530 DEX for on- and off-road motorcycles up to 900/750 cc The developers at Enuma Chain Manufacturing Ltd have solved the balancing act between high quality and low price in an ideal way. The extra-reinforced DEX chain is equipped with the patented Quadra-X rings. The QX rings hold the lubricant perfectly between the moving parts of the chain, providing excellent protection against wear with very low internal friction. The high manufacturing quality and the material used give the DEX a higher breaking load at a lower weight than many comparable chains from other manufacturers. In addition, the chain is manufactured using "Zero Stretch Technology", a controlled stretching process during production. When riding, this results in extremely low stretch and protects the sprocket, chain and chain wheel. The DEX also scores with a very good price-performance ratio.
EK 525 Z ThreeD QX2 X-Ring Premium chain - 108 links
Chain ENUMA QX-Ring-Chain 525Z ThreeD, ultra reinforced, pitch 525, length 108 links, color standard (steel grey), incl. hollow rivet lock ThreeD (3D) motorcycle chains are elegant, stable, detailed and lightweight. ThreeD chains combine flexibility and strength without losing sight of the design. QX2 X-rings have better wear resistance and increase performance by around 30% compared to standard SX2 rings, resulting in approx. 1% more power at the rear wheel. Features:- The low-weight, smooth-running chain is suitable for use on the road and race track- Maximum performance thanks to reduced friction thanks to QX2 ring technology- Approx. 10% weight saving compared to equivalent high-end chain thanks to 3D plate shape- Available in 520, 525 and 530 pitches- Color: see item description Dimensions:- Inner plate 2.4 mm / outer plate 2.4 mm- Pin diameter 5.38 mm- Total width 23.1 mm- Weight per 100 links 1.90 kg- Tensile strength 4,500 kg
EK Chain ZVX-3 525 ultimate sport bike chain - 108 links
Chain ENUMA NX-ring chain ZVX-3, ultra reinforced pitch 525, length 108 links, color standard (steel grey), incl. full rivet lock ZVX-3 chain - the premier class of motorcycle chainsImproved sealing ring technology: The NX ring increases durability by a further 15% compared to the Quadra-X ring and reduces friction for smooth running of the chain and the best possible power transmission and development of the engine. With revolutionary zero-stretch technology: the drive chain hardly stretches at all during the running-in procedure, as is usual with other chains. Retensioning is therefore almost unnecessary at the beginning. This chain is therefore perfect for road riding and racing, as several turns can be completed with one adjustment. With perforated inner plate: Not just a weight saving! The lightening holes increase the stability of the chain enormously. Heat is dissipated better and dirt is removed from the chain links faster and more effectively, which in turn leads to significantly less wear on the sprocket and pinion. Especially recommended for powerful motorcycles from 600cc upwards.Rivet lock included. Use of screw lock possible (please order separately! No riveting tool required for installation). Dimensions:- Inner link 2.4 mm / outer link 2.6 mm- Pin diameter 5.38 mm- Total width 23.1 mm- Weight per 100 links 2.05 kg- Tensile strength 4,900 kg
Electrosport Stator - Honda CBR600F
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Electrosport Stator - Honda CBR600F4/FS/FI
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
