alpha Technik Drosselkit 25 kW für Honda NT650 Hawk, RC31
alpha Technik Drosselkit 25 kW für Honda NT650 Hawk, RC31 "Motorradland" Gutachten 25 kw für Honda NT650 Hawk, Fzg.Typ: RC31, ab Modelljahr 1991, von 42, bzw. 37 kW, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: MOTORRADLAND: Drosselblenden Produkt Typ: Drosselkit 25 kW für Honda NT650 Hawk, RC31 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung
alpha Technik Koyo wheel bearing 6004-2RS
Koyo wheel bearing 6004-2RS, 1 piece, Made in Japan, deep groove ball bearing sealed on both sides with plastic for various models
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*:15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70*Evtl. oEM reference number listed is for comparison purposes only!
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*: 15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70 *Evtl. oEM reference number listed is for comparison purposes only!
LSL Bremshebel Classic R14, schwarz/rot
LSL Bremshebel Classic R14, schwarz/rot LSL Bremshebel Classic R14, schwarz/rot Produktkennzeichnung: LSL Brems- und Kupplungshebel Produkt Typ: LSL Bremshebel Classic R14, schwarz/rot, lang
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
Shido battery LTZ14S, 12 V, 5 A, Lithium Ion
Battery type: Lithium IonVolt: 12 VA/Ah:5 AType designation: LTZ14SWhile the performance and size of lead-acid batteries have changed over the years, but not the actual principle for generating electricity, SHIDO lithium-ion batteries have given rise to a completely new mode of operation for generating electricity.Here, power is supplied by so-called LiFePO4 (lithium iron phosphate) cells, which are based on lithium and carbon and thus contain no lead or acid.Shido lithium batteries have 4 cells LiFePO4 with 3.2 volts which are connected in series to achieve an OCV of 12.8 volts. This is a perfect voltage for motorcycle starter batteries. The electronic battery management system (BMS) distributes charge and discharge evenly across the four cells. Due to its low internal resistance, a Shido lithium battery can produce a very high starting current with a low Ah. This output power ensures a powerful and fast start of the vehicle.All advantages at a glance - Faster starting ability of the battery due to the higher output power due to the low internal resistance - About 70% lighter - Very low self-discharge: Even after a year of standing, you don't need to charge the battery- Longer life with more than 1200 full charge and discharge cycles - Unlike lead-acid batteries, which lose capacity over time and may sulfate, lithium-ion batteries do not experience capacity loss over their lifetime - Reduced gasoline consumption due to stronger spark from the spark plug - Easy installation: lithium batteries has the same shape and uses the same connectors as lead-acid batteries - Super fast charging time: Due to the low internal resistance of the battery, it can absorb amps faster - Safe handling: LiFePO4 cannot explode or burn - No maintenance required - Stable discharge voltage thanks to the integrated battery management system (BMS) - No pollution: the battery contains only biodegradable and recyclable elements - Integrated charge status indicator - Always use a specific lithium charger/maintenance charger. - Battery cannot leak: Can be mounted in any position, even upside down
Tank protector with Honda Wing logo Original for all Honda models
Tank protector with Honda Wing logo Original for all Honda models
Tank ring Basic for Honda NT 650 Hawk GT (88-91) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco & Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: Absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism The Hepco & Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Not suitable for: Street Enduro M, Epic 16 Identical to universal tank ring 516007-7 A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system.
Tubular luggage rack top case carrier and side case carrier black for Honda NT 650 Hawk GT (88-91)
The Hepco&Becker Complete carrier, consisting of a side case carrier on both sides and the tubular luggage rack (top case carrier) is firmly bolted to the motorcycle and can onlybe mounted together . This carrier offers the possibility to mount almost all Hepco&Becker Side cases. Almost all Hepco&Becker top cases can be mounted on the tubular luggage rack.The side cases are locked to the carrier using a retaining lock. The required lock adapters, which are bolted to the right and left of the side case carrier, are included in the case set as standard.The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced with special inner tubes in areas subject to high stress. Details: Tubular steel construction Made in Germany Firmly bolted to the motorcycle High-quality surface coating Can only be mounted together as a set Suitable for almost all Hepco&Becker side cases and top cases: restrictions can be found in the model-specific information or the fitting instructions Scope of delivery: Carrier right, carrier left, tubular luggage rack for the rear, mounting material and instructions Tube diameter: 16 mm Luggage carriers do not require an ABE and are registration-free Color: black Weight: 4.3 kg Notes: Restrictions on legroom for: Junior / Junior Flash, Alu Standard, Xplorer, Xceed, Gobi, Journey 42
