Adapter kit for mounting universal top cases black for Honda PCX 125 (12-) Hepco & Becker
Details: The adapter kit for mounting universal top cases in black was specially developed for the Honda PCX 125. This kit enables the safe and easy installation of universal top cases on your motorcycle Please ensure that the universal top case you wish to use is compatible with this adapter kit. Weight: 1.3 kg Color: black Notes: Luggage rack only suitable for Journey top cases 30 and 40 with universal adapter plate (610089 or 610206)
ARROW Auspuff DARK URBAN für Honda PCX 125 2018-, Aluminium schwarz
ARROW Auspuff DARK URBAN für Honda PCX 125 2018-, Aluminium schwarz ARROW DARK URBAN Endschalldämpfer mit schwarzer Aluminium-Hülle und schwarzer Edelstahl-Endkappe, mit dB-Killer, mit Straßenzulassung. Für Honda PCX 125, Typ JF83, Modelljahr 2018- Kann nur mit ARROW-Krümmer AR-53076 verwendet werden. Produktkennzeichnung: Abgastechnik ARROW Hinweis: Kann nur mit ARROW-Krümmer AR-53076 verwendet werden. Produkt Typ: ARROW Urban ESD Honda PCX 125 18- Aluminium
ARROW Auspuff URBAN für Honda PCX 125 2018-, Aluminium
ARROW Auspuff URBAN für Honda PCX 125 2018-, Aluminium ARROW URBAN Endschalldämpfer mit Aluminium-Hülle und schwarzer Edelstahl-Endkappe, mit dB-Killer, mit Straßenzulassung. Für Honda PCX 125, Typ JF83, Modelljahr 2018- Kann nur mit ARROW-Krümmer AR-53076 verwendet werden. Produktkennzeichnung: Abgastechnik ARROW Hinweis: Kann nur mit ARROW-Krümmer AR-53076 verwendet werden. Produkt Typ: ARROW Urban ESD Honda PCX 125 18- Aluminium
ARROW Krümmer für Honda PCX125 2018- , mit Katalysator
ARROW Krümmer für Honda PCX125 2018- , mit Katalysator ARROW Krümmer (mit Katalysator), aus Edelstahl, mit Straßenzulassung. Für Honda PCX 125, Typ JF83, Modelljahr 2018- Nur in Verbindung mit ARROW URBAN Endschalldämpfer AR-53529 Produktkennzeichnung: Abgastechnik ARROW Hinweis: nur in Verbindung mit ARROW Endschalldämpfer AR-53529 Produkt Typ: ARROW Krümmer für Honda PCX125 18- Edelstahl
ARROW Racing-Krümmer für Honda PCX125 2018- , ohne Katalysator
ARROW Racing-Krümmer für Honda PCX125 2018- , ohne Katalysator ARROW Krümmer (ohne Katalysator), aus Edelstahl. Für Honda PCX 125, Typ JF83, Modelljahr 2018- Nur in Verbindung mit ARROW URBAN Endschalldämpfer AR-53529 Produktkennzeichnung: Abgastechnik ARROW Hinweis: nur in Verbindung mit ARROW Endschalldämpfer AR-53529 Geänderte Fahrzeugteile: Originalkatalysator entfällt Produkt Typ: ARROW Krümmer für Honda PCX125 18- Edelstahl
BANDO Premium drive belt variator
Scooter belt: Toothed on both sides The double-sided toothed drive belt is the first choice for high power requirements and a high power transmission ratio. A power transmission of up to 40 KW enables powerful driving pleasure. The remarkably long service life is based on the development experience we have gained - naturally in cooperation with our customers. The double-sided toothed timing belt is used in top-of-the-range scooters, ATVs, dune buggies, snowmobiles, golf cars and even microcars. Our development is constantly creating new fields of application. Belt structure Outer fabric Tension Adhesive rubber Bottom rubber Lower fabric OEM Ref.: 23100-K96-V01
Basic inspection kit Honda PCX 125 2019-2020 - NF ProKit
NF ProKit inspection kit - Basic NF ProKit inspection kits are available for many vehicles. With just one click, all the necessary parts for a complete inspection can be purchased in a practical bundle without having to laboriously search for the individual components. For further flexibility, NF ProKit offers the following variants: Basic Kits: Air filter Drive belts Roller cores Spark plug Oil filter (for 4T) Plus kits: Air filter Drive belt Roller cores Spark plug Oil filter (for 4T) Brake pads Premium kits: Air filter Drive belts Roller cores Spark plug Oil filter (for 4T) Brake pads Engine additives
BMC Sportluftfilter für Honda PCX125 2018-2020; X-ADV150 2019-
BMC Sportluftfilter für Honda PCX125 2018-2020; X-ADV150 2019- BMC Sportluftfilter für Honda PCX125 (Modelljahr '18-'20) X-ADV150 (ab Modelljahr '19-) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda PCX125/X-ADV150
Gas cap decor with HRC logo original for all Honda models
- Carbon look- HRC logo
High windshield Honda PCX 125 2024- original Honda
This windshield improves the comfort of the driver and is perfectly matched to the vehicle design .
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron grip rubber red 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and forms a beautiful contrast with the trapezoidal tongues to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights silver (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro bar end mirror Esagano-RS black/black long (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, long, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. The handlebar end mirror can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Overall height: 169 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/black short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Total height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/silver long (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, long, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. The handlebar end mirror can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Overall height: 169 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/silver short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Overall height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro Curve-Blast handlebar weights black (pair)
HIGHSIDER CURVE-BLAST handlebar weights - Finely bead-blasted surface in black satin finish - Handlebar weights made of black aluminum with black coated central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions Handlebar weight: Diameter: 35.5 mm Width: 17 mm Mount for mirror: Diameter: 29.8 mm Width: 12 mm Weight with attachments: 74 g Thread M6 x 1.25 mm Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 1 pair, contains: 2 x handlebar weights each. 2 x clamping sleeves D. 12 mm and D. 16 mm each. 2 x centering sleeves each type 1, type 2, type 3. 2 x each black-coated M6 central bolt, toothed washer and M6 conical nut
