HIGHSIDER Pro Apollo Bullet LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO BULLET LED indicators, for front and rear E-approved. Power LED blinker in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 22 mmB: 34 mmD: 40 mm Threaded bolt M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = blinker (+) Scope of delivery: 1 pair Note: E-approved for front and rear. Can be ordered as an option:HIGHSIDER Rear light/indicator APOLLO BULLET, article no. 254-171HIGHSIDER Indicator/position light APOLLO BULLET, article no. 204-173
HIGHSIDER Pro Apollo Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER Pro Apollo Classic LED Indicator housing chrome / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER pro relay electronics, two-channel, 6-14V
HIGHSIDER Electronic two-channel relay 6-14V(Even more functions than the predecessor HIGHSIDER Plus - Minus Converter CB3)It is possible to control the desired function via both plus and minus. An electronic, dual relay with inputs for all standard pushbuttons or switches.If one of the two inputs is connected to earth or plus via a switch, the corresponding 12 V output is switched on. The outputs can supply lines up to 40 W in continuous operation. Typical power consumers that are operated via non-latching buttons (e.g. horn, low beam, high beam, etc.) can be controlled with the HIGHSIDER two-channel relay. The use of the relay instead of a direct connection of the load to the switch enables the use of the smallest cable cross-sections and push-buttons with low current values. Example 1: You want to use a small push-button with a low flow current to switch a horn (high current consumption), for example. To prevent the button from being damaged by the normal power consumption, simply use this electronic relay.It allows you to use switches or buttons to switch high currents.Example 2:On some motorcycles (e.g. INDIAN), the blinker signal is switched to ground. This means: With the help of the electronic two-channel relay, you can now convert the grounded blinker signal to positive. This means that all indicators, indicator/tail light combinations or indicators/position lights can still be used.(To convert to an indicator/tail light combination (e.g. 254-540) you need 1 x the electronic relay for your vehicle)Product advantages:- Extremely thin cable cross-sections for connecting the buttons- Use of switches for low currents despite consumers with high currents- Extends the service life of switches- 2 independent channels- Very small dimensions and low weight Very small dimensions and low weight- Fully sealed product (waterproof)- Smaller and more flexible than expensive multi-channel switch boxes- Protection against all possible wiring errors- More flexible than - ALL IN ONE SMART BOXES -Dimensions:Width: 17 mmDepth: 9.5 mmHeight: 17 mmWeight: 9 gConnections:Red (thick) = ignition plus 12V (+)Yellow (thick) = work output CH2 (+)Blue (thick) = work output CH1 (+)Yellow (thin) = activation plus signal CH2Blue (thin) = activation plus signal CH1Yellow/black (thin) = activation minus signal CH2Blue/black (thin) = activation minus signal CH1Maximum power: 40 wattsScope of delivery: 1 piece
HIGHSIDER Pro Rocket Bullet LED Indicator housing chrome / lens smoke gray (pair), front & rear
HIGHSIDER ROCKET BULLET LED blinker with aluminum housing and tinted glass. The cone-shaped version of the HIGHSIDER ROCKET CLASSIC - E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The soft, round shape supports the classic associations evoked in the observer. 6 very bright SMDs are installed in the center. The outer ring consists of COBs (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:Diameter: 45 mm Width: 65 mmDepth: 64 mm Stem length: 24 mmMounting bolt with M8 thread, length: 25 mm.Connections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pair Other accessories from the HIGHSIDER CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our HIGHSIDER CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER Pro Rocket Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER ROCKET CLASSIC LED blinker, for front and rear E-approvedThe striking variant of the HIGHSIDER ROCKET BULLET model. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The soft, round shape supports the classic associations evoked in the viewer.With this innovative lighting technology, 6 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 45 mm B Width: 67 mmC Depth: 70 mm Stem length: 24 mmMounting bolt: M8, length 25 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pair
HIGHSIDER Pro Rocket Classic LED Indicator housing chrome / lens smoke gray (pair), front & rear
HIGHSIDER ROCKET CLASSIC LED blinker, for front and rear E-approvedThe striking variant of the HIGHSIDER ROCKET BULLET model. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The soft, round shape supports the classic associations evoked in the viewer.With this innovative lighting technology, 6 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions:A Diameter: 45 mm B Width: 67 mmC Depth: 70 mm Stem length: 24 mmMounting bolt: M8, length 25 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pair
Tecnium Street Performance sintered metal brake pads - MF282
Excellent compromise between performance and durability for performance-oriented use in the sports sector (high coefficient of friction at the front). In conjunction with MR brake pads (medium coefficient of friction) at the rear, they offer optimum brake balance.
