alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Triumph Bonneville, Street Cup, Street Twin
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Triumph Bonneville, Street Cup, Street Twin, Thruxton / R alpha Technik Bremsscheibe ABD33 schwimmend (Da=310mm, Di=82,5mm, Lochkreis=100,5mm), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, inkl. Distanzscheiben für ABS-Sensoren, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5
alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5 ARI Simmerringsatz, Gabelwellendichtringe 41 x 53 x 8/10,5, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41 x 53 x 8/10,5
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
Barracuda Brems- und Kupplungshebelsatz für Triumph Bonneville T100 / Street Triple 675 / Scrambler
Barracuda Brems- und Kupplungshebelsatz für Triumph Bonneville T100 / Street Triple 675 / Scrambler 900 / Daytona 650 / Tiger u.v.m. Barracuda Brems- und Kupplungshebelsatz, Farbe schwarz, klappbar und verstellbar, mit ABE, für Triumph Modelle siehe Verwendungsliste. Produktkennzeichnung: Barracuda Brems- und Kupplungs Produkt Typ: Brems- und Kupplungshebelsatz
BARRACUDA Superbike Lenker Aluminium 22 mm blau
BARRACUDA Superbike Lenker Aluminium 22 mm blau Barracuda Superbike Lenker 22mm, Aluminium blau eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 22 mm gold
BARRACUDA Superbike Lenker Aluminium 22 mm gold Barracuda Superbike Lenker 22mm, Aluminium gold eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 22 mm rot
BARRACUDA Superbike Lenker Aluminium 22 mm rot Barracuda Superbike Lenker 22mm, Aluminium rot eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 22 mm schwarz
BARRACUDA Superbike Lenker Aluminium 22 mm schwarz Barracuda Superbike Lenker 22mm, Aluminium schwarz eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 22 mm silber
BARRACUDA Superbike Lenker Aluminium 22 mm silber Barracuda Superbike Lenker 22mm, Aluminium silber eloxiert, mit Teilegutachtensiehe Verwendungsliste, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker Aluminium 22mm
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert blau Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium blau eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert gold
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert gold Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium gold eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert rot
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert rot Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium rot eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert schwarz
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert schwarz Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium schwarz eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert silber
BARRACUDA Superbike Lenker Aluminium 28/22mm konifiziert silber Barracuda Superbike Lenker 28/22mm (konifiziert), Duchmesser an den Aufnahmen 28 mm, Durchmesser an den Griffen 22 mm, Aluminium silber eloxiert, mit Teilegutachten, ABE in Vorbereitung. Produktkennzeichnung: Barracuda Lenker & Griffe Produkt Typ: BARRACUDA Superbike Lenker 28/22mm (konifiziert)
BMC Sportluftfilter für diverse Triumph Motorräder
BMC Sportluftfilter für diverse Triumph Motorräder BMC Sportluftfilter für Triumph Thruxton 900 (Modelljahr 2004-2014) Scrambler 865 (Modelljahr 2006-2014) Bonneville T790/865 T100/SE (Modelljahr 2001-2016) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Triumph
C-Bow bag holder for Triumph Bonneville T100 (05-15) Hepco & Becker
All HEPCO & BECKER side bags, leather bags or cases with C-Bow mount can be attached to the motorcycle using model-specific C-Bow carriers. The unobtrusive and elegant design blends perfectly into the overall line of the vehicle. A sufficient safety distance of the bags to the hot tailpipe of the exhaust is self-evident. Thanks to the C-Bow technology, the matching bags are quickly and easily attached to the C-Bow carrier with just one click and are theft-protected and firmly locked by key. The bags are firmly attached to the motorcycle and remain in position even when loaded. The turn signals remain mostly in original position. Please refer to the deposited mounting instructions and model-specific notes.Solid carrier for mounting HEPCO & BECKER C-Bow side bags and panniersHigh quality coatingPrecisely fitting, model-specific design adapted to the lines of the motorcycleNormal HEPCO & BECKER hard cases, like the Junior or Journey do not fit!Krauser K-Wing cases do not fit the C-Bow carrier!The carrier is much more discreetly designed than a normal side case carrier and therefore not suitable for large payloadsRecommended load: 5kg per bag (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer specifications)Can usually be combined with top case carriers, sissy bars, or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions)Luggage rack extensions can restrict bag mounting on the rackLuggage carriers do not require ABE or registration in the papers
Case carrier for Triumph Bonneville T100 (05-15) Hepco & Becker
The normal side case carrier from HEPCO & BECKER are firmly bolted to the motorcycle. All normal hard cases from HEPCO & BECKER fit on this carrier. The cases are attached to the carrier by means of a quick-release fastener. In addition, an aluminum adapter is needed, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and provide the receptacle for the case lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the rider, or the pillion passenger, even in the event of a fall.The HEPCO & BECKER side pannier carriers can usually be combined with a tubular luggage bridge or other rear carriers from our company without any problems. Please refer to the mounting instructions.Tubular steel constructionFirmly bolted to the motorcycleTurn signals usually remain in original position, but sometimes must be moved (please refer to the mounting instructions with the product)Recommended load: 10kg per side case (please note model-specific instructions of the motorcycle manufacturer or notes on the mounting instructions)Right + left incl. mounting material and instructionsLuggage carriers do not require ABE or registration
Engine Guard for Triumph Bonneville T100 / Scrambler 900 (05-15)
Whether you spend most of your time in difficult terrain, on the country road or in the city, a crash bar from HEPCO & BECKER is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that, in the event of a rollover or unintentional contact with the ground, you can save the motorcycle and the rider from greater damage.HEPCO & BECKER's guards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with an integrated crash pad on new models.Different surface finishes are offered depending on the vehicle model.Protects in the event of accidents and fallsHelpful when lashing the motorcycleHigh quality metal coatingComprehensive and easy to understand installation instructionsScope of delivery:Right + left incl. mounting material and instructionsPlease refer to the installation instructions or the vehicle-specific instructions for any restrictions or notes that may ariseNo ABE or registration is required
HIGHSIDER CNC cover silver for brake reservoir for Triumph
HIGHSIDER CNC machined aluminum brake fluid reservoir cover, high gloss anodized in black or chrome. Fits Triumph 1200 Thruxton 2016-, Bobber, Boneville T 100/120.Character and style are in the smallest details. Simply replace the classy cover with the original and add another valuable touch to your bike.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Scope of delivery:1x brake coverNotice:Only suitable for DOT 4.The original screws and seals are used.Caution when replacing the cover. Best to cover the area generously with rags, because brake fluid can attack the paint of the vehicle.
Highsider Universal CNC cap for brake fluid reservoir, Ø 42 mm
HIGHSIDER Universal CNC cap for brake fluid reservoir Ø 42 mmFits models with a cap diameter of 42 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install. The cover cap is simply placed on the original cover. The design fits perfectly with our HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 46 mmInner diameter: 42 mmHeight: 20 mmScope of delivery: 1 piece
Highsider Universal CNC cap type A for the brake fluid reservoir, Ø 61 mm
HIGHSIDER Universal CNC cap type A for the brake fluid reservoirFits models with a cap diameter of 61 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install.The cover cap is simply placed on the original cover. The design fits perfectly with the HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 65 mmInner diameter: 61 mmHeight: 22 mmScope of delivery: 1 piece
Highsider Universal CNC cap type B for the brake fluid reservoir, Ø 61 mm
HIGHSIDER Universal CNC cap type B with recess for the lid lockFits models with a lid diameter of 61 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install. The cover cap is simply placed on the original cover. The design fits perfectly with the HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 65 mmInner diameter: 61 mmHeight: 22 mmScope of delivery: 1 piece
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
