Givi Topcaseträger for Triumph Scrambler 1200 (19-)
Specific topcase carrier for MONOKEY® cases / with plate E251 (not included) / max. load 6 kg An overview of our MONOKEY cases you will find below in the accessories! Important note:GIVI products are designed for vehicles in original condition.Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed.
BMC Sport air filter for Triumph Scrambler XC/XE (17-)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
Engine Guard black for Triumph Scrambler (2019-)
Whether you are most of the time in heavy terrain, on the country road or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected at all times against unexpected mishaps.More than that, in the event of a rollover or unintentional contact with the ground, you can protect the motorcycle and the rider from greater damage.The protective bars from Hepco&Becker perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with integrated crash pad on new models.Different surface finishes are offered depending on the vehicle model. protects in the event of accidents and falls helpful when lashing the motorcycle high quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens, Germany comprehensive and easy to understand mounting instructions Scope of delivery: right + left incl. mounting material and instructions if there are any restrictions or notes, please refer to the installation instructions or the vehicle specific notes no ABE or registration is required
Tube luggage bridge black for Triumph Scrambler 1200 XC (2019-)
The carriers are model-specific manufactured and fit only to the listed motorcycle on the mounting instructions. Thanks to the construction of German quality steel, Hepco&Becker luggage racks ensure maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is also maintained in the long term. If necessary, soft luggage can also be lashed without problems. The tubular luggage bridge offers many possibilities for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage bridge widening Recommended load: 5kg (Please note the model-specific instructions, as well as the motorcycle manufacturer-specific information. Heavy luggage should generally be transported on the rear, but in the side panniers or tank bag. can usually be combined with side pannier racks or C-Bow holders without any problems (follow the mounting instructions and model-specific instructions) Luggage racks generally do not require ABE or registration Scope of delivery: luggage rack + mounting material + instructions not suitable for topcase, only for soft luggage!
Side carrier one-sided left black C-Bow for Triumph Scrambler 1200 XC (2019-)
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with topcase carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict bag mounting on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance from the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
Side case carrier fixed screwed on one side left black for Triumph Scrambler 1200 XC (2019-)
The firmly screwed side case carrier from Hepco&Becker for hard cases are firmly connected to the motorcycle frame. All normal hard cases from Hepco&Becker fit on this carrier. The cases are attached to the carrier by means of a quick release (metal retaining lock). In addition, an aluminum adapter is needed, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed to the rear right and left of the carrier and provide the receptacle for the case lock.The model-specific carriers are solidly developed and offer effective protection for the legs of the rider, or the pillion passenger, even in the event of a fall.The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any problems. Please refer to the mounting instructions, as well as the model-specific notes. Construction made of tubular steel MADE IN GERMANY firmly bolted to the motorcycle frame Fits most Hepco&Becker hard saddlebags (please note model specific instructions for each carrier for any restrictions) Turn signals usually remain in original position, but sometimes need to be moved to ensure a certain beam angle (please refer to the installation instructions with the product) Recommended load: 10kg in each side case (please note model-specific instructions of the motorcycle manufacturer or notes on the mounting instructions) Scope of delivery: left side incl. mounting material and instructions Luggage systems generally do not require ABE or registration
Main stand black for Triumph Scrambler 1200 XC (2019-)
Stable. Stable. Easy to operate. HEPCO&BECKER's center stands usually do not restrict the leaning freedom when riding and are extremely robust. Thanks to sophisticated geometry and non-slip treads, it is very easy to park the motorcycle safely in any situation.The precisely manufactured stands are very stable, sand-blasted, primed and black powder-coated and therefore weather and value resistant.Main stands simplify maintenance work and ensure a safe stand, e.g. when refueling. During wintering they relieve the suspension elements and the rear wheel. ABE is supplied usually no restriction of lean angle clearance high quality surface finish Delivery includes: main stand+ mounting material + instructions please note the mounting instructions Helpful tool for mounting the tension spring: item number: 700030
Lamp guard grille black for Triumph Scrambler 1200 XC (2019-)
The Hepco&Becker lamp protection grille protects the headlight in many cases and also gives your bike the stand offroad look. adapted to the design of the motorcycle effective protection no reflections or danger by own glare easy mounting on mostly existing screw points solid construction made of German steel robust and high quality coating made in Germany without TÜV
Barkbusters hardware kit two-point mounting aluminum Triumph Scrambler 1200
Hardware kits are tailor-made and fit perfectly on many Street, Adventure, Dual Sport, Trail and Rally bikes. The full wrap-around aluminum hardware is compatible with JET, VPS, STORM or CARBON fenders. All recommended mounting options are for motorcycles with OEM specifications. Two Point Mount products are designed for impact protection.
HIGHSIDER pro handlebar riser black 25 mm, For Ø28.6mm handlebars
Clamp block increase +25 mm for X-Bar handlebars with ABEThe CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.Material: aluminiumMaterial treatment: anodizedMounting: Between clamping block and handlebars, 25mm riseDiameter: for handlebars with a Ø of 28.6mm in the clamping areaPitch: 38-46mmScrew length: 50 - 65 mmAttention:Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RM25 clamp in the enclosed ABE and all conditions are observed.For vehicles that are not listed in the model list, approval is possible through acceptance in accordance with § 19(2) StVZO.
HIGHSIDER pro handlebar riser silver 15 mm, For Ø28.6mm handlebars
Clamp block increase +15 mm for X-Bar handlebars with ABEThe CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.Material: aluminiumMaterial treatment: anodizedMounting: Between clamping block and handlebar, 15mm riseDiameter: for handlebars with a Ø of 28.6mm in the clamping areaPitch: 38-46mmScrew length: 45 - 55 mmAttention:Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RM15 clamp in the enclosed ABE and all conditions are observed.For vehicles that are not listed in the model list, approval is possible through acceptance in accordance with § 19(2) StVZO.
HIGHSIDER pro handlebar riser silver 25 mm, For Ø28.6mm handlebars
Clamp block increase +25 mm for X-Bar handlebars with ABEThe CNC-milled aluminum spacers increase the handlebar position. They are simply installed in the standard handlebar clamp.You can find the right bolt length for your bike using our bike finder or by measuring the length of the original bolt used and adding 25 mm.Material: aluminiumMaterial treatment: anodizedMounting: Between clamping block and handlebars, 25mm riseDiameter: for handlebars with a Ø of 28.6mm in the clamping areaPitch: 38-46mmScrew length: 50 - 65 mmAttention:Please check whether your vehicle is listed in the ABE. This article is only registration-free if your motorcycle is assigned to the RM25 clamp in the enclosed ABE and all conditions are observed.For vehicles that are not listed in the model list, approval is possible through acceptance in accordance with § 19(2) StVZO.
HIGHSIDER pro handlebar weights black M6 Suzuki (pair)
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for SuzukiBlack anodized aluminium handlebar weights for various Suzuki original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!Dimensions:Width: 28 mmScrew length: 41 mm, M6Diameter: 25.4 mmWeight: approx. 35 gScope of delivery: 1 pair
HIGHSIDER smart adapter cable for indicators, For Triumph (pair)
Adapter cable for connecting accessory indicators with 3.5 mm round plugs to the original wiring harness of your bike.Suitable for various Triumph models. - For quick and easy blinker conversion without soldering or crimping.- Avoids removal of the socket on the original wiring harness.- Can therefore be retrofitted with the original indicators at any time. Scope of delivery: 1 pair
HIGHSIDER smart mounting plates Indy Spacer Black
HIGHSIDER INDY SPACER mounting plates, aluminum- Suitable for Triumph Bonneville / Thruxton models -When original indicators are replaced with LED, halogen or bulb mini indicators, an unsightly gap often remains. The HIGHSIDER aluminum mounting plates cover these gaps so that no large cut-outs remain.Dimensions:Hole diameter: 8 mmWidth: 28 mmLength: 36 mmThickness: 3 mmMaterial: aluminumColor: blackScope of delivery: 1 set (4 pieces)Note:Please always check the dimensions specified by us for accuracy of fit before purchasing.
HIGHSIDER smart mounting plates Indy Spacer Black
HIGHSIDER mounting plates INDY SPACER, aluminum- Suitable for Triumph, Moto Guzzi, Buell, Ducati models -When original indicators are replaced with LED, halogen or bulb mini indicators, an unsightly gap often remains. The HIGHSIDER aluminum mounting plates cover these gaps so that no large cut-outs remain.Dimensions:Hole diameter: 8 mmWidth: 20 mmLength: 35 mmThickness: 3 mmMaterial: aluminumColor: blackScope of delivery: 1 set (4 pieces)Note:Please always check the dimensions specified by us for accuracy of fit before purchasing.
Highsider Universal CNC cap for brake fluid reservoir, Ø 42 mm
HIGHSIDER Universal CNC cap for brake fluid reservoir Ø 42 mmFits models with a cap diameter of 42 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install. The cover cap is simply placed on the original cover. The design fits perfectly with our HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 46 mmInner diameter: 42 mmHeight: 20 mmScope of delivery: 1 piece
Highsider Universal CNC cap type A for the brake fluid reservoir, Ø 61 mm
HIGHSIDER Universal CNC cap type A for the brake fluid reservoirFits models with a cap diameter of 61 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install.The cover cap is simply placed on the original cover. The design fits perfectly with the HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 65 mmInner diameter: 61 mmHeight: 22 mmScope of delivery: 1 piece
Highsider Universal CNC cap type B for the brake fluid reservoir, Ø 61 mm
HIGHSIDER Universal CNC cap type B with recess for the lid lockFits models with a lid diameter of 61 mm.Character and style are in the smallest details. Very shapely cap with two polished chamfers made of high-strength, black anodized aluminum. Very precise fit and easy to install. The cover cap is simply placed on the original cover. The design fits perfectly with the HIGHSIDER CONERO series.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can thus easily design your bike according to your wishes.Dimensions:Outer diameter: 65 mmInner diameter: 61 mmHeight: 22 mmScope of delivery: 1 piece
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
