Saddlebags

The high version of the PRO BLAZE saddlebags is specially designed for motorcycles with high exhaust. Due to the elevated position, the bags are not affected by the heat radiation of the exhaust. SW-MOTECH manufactures this bag set with the matching spacer brackets for the Triumph Trident 660. The PRO BLAZE saddlebags with removable spacer bars impress with their sporty look, low weight and clever mounting system. SW-MOTECH manufactures the bags from robust and particularly UV-resistant 1680D Ballistic Nylon. In combination with side walls made of dimensionally stable EVA material, the luggage is protected from splash water and dust. Developed specifically for sporty motorcycles, the saddlebags affect the driving characteristics only minimally. If you're traveling without luggage, you can remove the spacer bars with a flick of the wrist, leaving only inconspicuous mounts on the bike.The model-specific spacer bars, a high-performance Velcro strap and an additional securing strap with click closure ensure the best hold and prevent the bags from swinging in or flapping - even at high speeds. Scope of delivery 2 x PRO BLAZE H saddlebags 2 x BLAZE spacer bars 2 x waterproof inner bags 1 x paint protection film Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / anthracite Total weight: approx. 5,4 kg Total volume: 30,0-40,0 l

  The smallest model in the SysBag WP family impresses with its enormous versatility. It cuts a fine figure on adventure bikes as well as sporty road bikes and defies all external influences. Like the slightly larger M version, the SysBag WP S has an EVA section on the front. This results in a clear, elegant shape, while the lamination makes the bag waterproof and UV-resistant. A side bag that is suitable for all types of use and will be a reliable and stylish companion for many motorcyclists. The SysBag WP models are your reliable companions for uncompromising motorcycle adventures. Thanks to careful material selection and elaborate workmanship, all three bags are completely waterproof and extremely robust. There is a suitable SysBag WP for every area of use and every motorcycle - the three models S, M and L differ in terms of luggage volume and attachment method. All three bags have a roll-top closure and an overlapping lid. The inside pocket is removable and two freely positionable dividers with Velcro fasteners make it easier to organize the luggage. The SysBag WP models are available either individually, with an adapter plate or as a set with the matching side carrier. If you opt for the simple quick-release solution on the carrier, the bags must first be attached once to an adapter plate using straps and metal cam buckles. These in turn are attached either to the SLC carrier (S, M) or to the removable PRO side carrier (L). Alternatively, all three SysBag WP models can also be attached to the rear, a luggage carrier or side carriers from other manufacturers using the straps included in the scope of delivery. Made from TPU material and EVA plastic Attachment to the SLC carrier or by looping onto the rear or third-party carriers 100% waterproof in the main compartment Roll-top made from 210 ripstop TPU MOLLE attachment for attaching additional pouches Reinforced carrying handles Reflective details for better visibility Lashing loops for attaching cable locks Velcro fasteners for securing excess strap lengths Removable inner pocket Scope of delivery 1 x SysBag WP S 4 x loop straps 4 x anti-slip tubes 1 x paint protection film Fitting instructions Mounting material Mounting details Material: EVA / TPU Color: black Dimensions: 32.5 x 16.5 x 33.0 cm Total weight: approx. 1.6 kg Total volume: 12.0-16.0 l Please note Attachment to the PRO side carrier is only possible in combination with the separately available adapter plate and the adapter kit for PRO side carriers KFT.00.152.36500  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC1 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Please note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier left (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric emphasize the elaborate vintage design of the soft luggage series. Click on the right SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC1 - Black Edition 1 x waterproof inner bag Details Material: canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier right (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC1 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 26.0 cm Total weight: approx. 1.0 kg Total volume: 9.8 l Please note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier left (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC1 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Please note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier left (available separately)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC1 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Notes: Requires SLC side support leftfor assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC1 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Note: SLC side support on the right required for assembly (required separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC1 - Black Edition 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / black Dimensions: 31.0 x 14.0 x 26.0 cm Total volume: 9.8 l Note: SLC side carrier left required for assembly (available separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Legend Gear LC1 side bag also suitable for bikes with top-mounted exhaust thanks to its compact shape Model-specific SLC side carrier made of sturdy steel tube ensures reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear LC side bag to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC1 - Black Edition 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / black Dimensions: 31.0 x 14.0 x 26.0 cm Total weight: approx. 1.0 kg Total volume: 9.8 l Notes: Requires SLC side carrier on the right for assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC2 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Notes: Requires SLC side support on the right for assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC2 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Notes: Requires SLC side support on the right for assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined.

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide allows the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC2 - Black Edition 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier left (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide allows the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC2 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Please note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier left (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC2 - Black Edition 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier right (available separately, this can be found in the vehicle category and under the article under accessories)

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery 1 x Legend Gear side bag LC2 1 x waterproof inner bag Details Material: Canvas / Napalon synthetic leather Surface: waxed Color: black / brown Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Please note To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined. Required for mounting SLC side carrier right (available separately, this can be found in the vehicle category and under the article under accessories)  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the left-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC2 - Black Edition 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Notes: Requires SLC side support on the rightfor assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined.  

  The Legend Gear LC side bag combines a classic look with contemporary handling. The bag can be attached to and removed from the SLC side carrier in a few simple steps using a quick-release system. Robust Napalon artificial leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Click on the right-hand SLC side carrier Model-specific SLC side carrier made of sturdy tubular steel ensures a reliable hold Quick-release fastener made of fiberglass-reinforced polyamide enables the Legend Gear side bag LC to be attached and removed in seconds Rain protection thanks to roll closure, water-repellent material and waterproof inner pocket Numerous straps for individual attachment of the Legend Gear LA1 and LA2 additional bags and the Legend Gear LA3 smartphone bag Tabs for attaching the Legend Gear LA4 shoulder strap Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated Scope of delivery: 1 x Legend Gear side bag LC2 - Black Edition 1 x waterproof inner bag Details: Material: Canvas / Napalon synthetic leather Surface: waxed Color: black Dimensions: 31.0 x 14.0 x 35.0 cm Total volume: 13.5 l Notes: Requires SLC side support on the rightfor assembly (sold separately) To protect the natural fibers from the weather, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning Side pockets available for the right and left side of the motorcycle, they can be used individually or combined.  

  The LH side bag combines the low weight of a saddle bag with the dimensional stability of a pannier. The classic Legend Gear look is combined with high-tech materials and a modern fastening system. The bag can be attached to the fender strut in no time at all using the integrated locking mechanism. When riding without luggage, only inconspicuous attachment points remain on the motorcycle.The spacious side bag is completely black. The outer material is a combination of textile fabric and grained imitation leather with elaborate diamond quilting. For an extra portion of comfort, the side pouch has an integrated carrying handle. The bag also has a MOLLE system for attaching additional pouches. Thieves and rain don't stand a chance: the integrated anti-theft device, the lockable lid and the supplied waterproof inner bag protect your luggage. No swinging in, no flapping: the lid and rear panel made of dimensionally stable yet lightweight ABS plastic and PE-reinforced sides ensure that the bag retains its shape even at high speeds. Generous storage space: 19.5 l volume The model-specific bag carrier is mounted on the original attachment points of the fender strut Integrated anti-theft device inside the bag is activated with a quarter turn, additional theft protection with lockable bag lid Carrying handle allows comfortable carrying M.O.L.L.E. system on both sides for attaching additional bags Excellent dimensional stability thanks to ABS plastic back panel and lid as well as PE-reinforced sides Optimized design of the rear panel provides an extra portion of stability and follows the rear shape of the motorcycle Use of the pillion footrests is not restricted Attractive look: combination of black textile fabric made of 600D polyester and black imitation leather with elaborate diamond quilting, elements made of ABS plastic with textile laminate Robust & easy to clean: made from weather and UV-resistant 600D polyester and grained imitation leather Waterproof inner bag included in the scope of delivery Scope of delivery: 1 x Legend Gear side bag LH1, left Mounting instructions Mounting material Details: Material: 600D polyester / synthetic leather Color: black / black Dimensions: 42.0 x 24.0 x 28.0 cm Total weight: approx. 2.4 kg Total volume: 19.5 l Notes: Side pockets available for right and left side of motorcycle, they can be used individually or combined The matching lock set for the bag lid and the SLH side carriers are available separately

  The LH side bag combines the low weight of a saddle bag with the dimensional stability of a pannier. The classic Legend Gear look is combined with high-tech materials and a modern fastening system. The bag can be attached to the fender strut in no time at all using the integrated locking mechanism. When riding without luggage, only inconspicuous attachment points remain on the motorcycle.The spacious side bag is completely black. The outer material is a combination of textile fabric and grained imitation leather with elaborate diamond quilting. For an extra portion of comfort, the side pouch has an integrated carrying handle. The bag also has a MOLLE system for attaching additional pouches. Thieves and rain don't stand a chance: the integrated anti-theft device, the lockable lid and the supplied waterproof inner bag protect your luggage. No swinging in, no flapping: the lid and rear panel made of dimensionally stable yet lightweight ABS plastic and PE-reinforced sides ensure that the bag retains its shape even at high speeds. Generous storage space: 19.5 l volume With the separately available LEGEND-GEAR LOCK SET, you can additionally protect your luggage against theft The model-specific bag carrier is mounted on the original attachment points of the fender strut Integrated anti-theft device inside the bag is activated with a quarter turn, additional theft protection with lockable bag lid Carrying handle allows comfortable carrying M.O.L.L.E. system on both sides for attaching additional bags Excellent dimensional stability thanks to ABS plastic back panel and lid as well as PE-reinforced sides Optimized design of the rear panel provides an extra portion of stability and follows the rear shape of the motorcycle Use of the pillion footrests is not restricted Attractive look: combination of black textile fabric made of 600D polyester and black imitation leather with elaborate diamond quilting, elements made of ABS plastic with textile laminate Robust & easy to clean: made from weather and UV-resistant 600D polyester and grained imitation leather Waterproof inner bag included in the scope of delivery Scope of delivery: 1 x Legend Gear side bag LH1, right 1 x waterproof inner bag Mounting instructions Mounting material Details: Material: 600D polyester / synthetic leather Color: black / black Dimensions: 42.0 x 24.0 x 28.0 cm Total weight: approx. 2.2 kg Total volume: 19.5 l Notes: Side pockets available for right and left side of motorcycle, they can be used individually or combined The matching lock set for the bag lid and the SLH side carriers are available separately

  The LH side bag combines the low weight of a saddle bag with the dimensional stability of a pannier. The classic Legend Gear look is combined with high-tech materials and a modern fastening system. The bag can be attached to the fender strut in no time at all using the integrated locking mechanism. When riding without luggage, only inconspicuous attachment points remain on the motorcycle.The spacious side bag is completely black. The outer material is a combination of textile fabric and grained imitation leather with elaborate diamond quilting. For an extra portion of comfort, the side pouch has an integrated carrying handle. The bag also has a MOLLE system for attaching additional pouches. Thieves and rain don't stand a chance: the integrated anti-theft device, the lockable lid and the supplied waterproof inner bag protect your luggage. No swinging in, no flapping: the lid and rear panel made of dimensionally stable yet lightweight ABS plastic and PE-reinforced sides ensure that the bag retains its shape even at high speeds. Generous storage space: 25.5 l volume With the separately available LEGEND-GEAR LOCK SET, you can additionally protect your luggage against theft The model-specific bag carrier is mounted on the original attachment points of the fender strut Integrated anti-theft device inside the bag is activated with a quarter turn, additional theft protection with lockable bag lid Carrying handle allows comfortable carrying M.O.L.L.E. system on both sides for attaching additional bags Excellent dimensional stability thanks to ABS plastic back panel and lid as well as PE-reinforced sides Optimized design of the rear panel provides an extra portion of stability and follows the rear shape of the motorcycle Use of the pillion footrests is not restricted Attractive look: combination of black textile fabric made of 600D polyester and black imitation leather with elaborate diamond quilting, elements made of ABS plastic with textile laminate Robust & easy to clean: made of weather and UV-resistant 600D polyester and grained imitation leather Waterproof inner bag included in the scope of delivery Scope of delivery: 1 x Legend Gear side bag LH2, left 1 x waterproof inner bag Mounting instructions Mounting material Details: Material: 600D polyester / synthetic leather Color: black / black Dimensions: 47.0 x 24.0 x 39.0 cm Total weight: approx. 2.8 kg Total volume: 25.5 l Notes: Side pockets available for right and left side of motorcycle, they can be used individually or combined The matching lock set for the bag lid and the SLH side carriers are available separately

The high version of the PRO BLAZE saddlebags is specially designed for motorcycles with high exhaust. Due to the elevated position, the bags are not affected by the heat radiation of the exhaust. SW-MOTECH manufactures this bag set with the matching spacer brackets. The PRO BLAZE saddlebags with removable spacer bars impress with their sporty look, low weight and clever mounting system. SW-MOTECH manufactures the bags from robust and particularly UV-resistant 1680D Ballistic Nylon. In combination with side walls made of dimensionally stable EVA material, the luggage is protected from splash water and dust. Developed specifically for sporty motorcycles, the saddlebags affect the driving characteristics only minimally. If you're traveling without luggage, you can remove the spacer bars with a flick of the wrist and only inconspicuous mounts remain on the machine. The model-specific spacer bars, a high-performance Velcro strap and an additional securing strap with click closure ensure the best hold and prevent the bags from swinging in or flapping - even at high speeds. BLAZE spacer bars Removable spacer bars prevent contact between saddlebags and tires One-time installation of the model-specific, inconspicuous brackets of the spacer bars Attachment and removal of the spacer bars with a few simple steps Details Material: stainless steel / polyamide Color: silver / black Total weight: 0 .7 kg PRO BLAZE H Saddlebags Specially designed for motorcycles with a high exhaust pipe PRO BLAZE saddlebags with model-specific spacers allow conversion from sporty motorcycles to touring vehicles in seconds Low weight and sporty look Side panels made of dimensionally stable and laminated EVA material Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Heavy-duty Velcro strap additionally secures the left and right saddlebag and supports the weight of the luggage Top of Velcro tab covered with non-slip material for secure grip on pillion seat Zippered volume expansion Main compartment can be loaded from the top Outside pocket with covered zipper MOLLE attachment made of sturdy Hypalon material on the front for additional pockets Practical carrying handles Reflective details for increased safety in road traffic Details Material: 1680D Ballistic Nylon / EVA plastic Color: black / anthracite Dimensions: 46,0 x 18,0 x 32,0 cm Total weight: 1 ,5 kg Total volume: 15,0-20,0 l Scope of delivery 2 x PRO BLAZE H saddlebags 2 x BLAZE spacer bars 2 x waterproof inner bags 1 x paint protection film Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon / EVA plastic Color: black / anthracite Total weight: 4 ,4 kg Total volume: 40.0 l

  The high version of the PRO BLAZE saddlebags was specially developed for motorcycles with a high exhaust pipe. Thanks to the raised position, the bags are not affected by the heat radiation from the exhaust. SW-MOTECH manufactures this bag set with the appropriate spacer brackets. The PRO BLAZE saddlebags with removable spacer bars impress with their sporty look, low weight and clever fastening system. SW-MOTECH manufactures the bags from robust and particularly UV-resistant 1680D ballistic nylon. In combination with side walls made of dimensionally stable EVA material, the luggage is protected from splash water and dust. Specifically developed for sporty motorcycles, the saddlebags only have a minimal impact on riding characteristics. If you are traveling without luggage, the spacer bars can be removed in one easy step, leaving only inconspicuous brackets on the bike. The model-specific spacer bars, a powerful Velcro strap and an additional safety strap with click fastener ensure the best hold and prevent the bags from swinging in or flapping - even at high speeds. BLAZE spacer bar New improved fastening mechanism Easy attachment of the spacer brackets, even when wearing gloves Integrated color indicator shows when the bracket is secure in the holder One-time installation of the model-specific, inconspicuous spacer brackets Fastening and removing the spacer brackets in a few simple steps Details Material: stainless steel / polyamide Color: silver / black Total weight: 1.1 kg   PRO BLAZE H saddlebags Especially for motorcycles with a high exhaust pipe PRO BLAZE saddlebags with model-specific spacer brackets enable conversion from sporty motorcycles to touring vehicles in seconds Low weight and sporty look Side walls made of dimensionally stable and laminated EVA material Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating A powerful Velcro strap additionally secures the left and right saddlebag and supports the weight of the luggage Top side of the Velcro strap covered with anti-slip material for a secure hold on the pillion seat Zipper volume expansion Main compartment can be loaded from the top Outer pocket with covered zipper MOLLE attachment made of sturdy Hypalon material on the front for additional pockets Practical carrying handles Reflective details for greater safety in road traffic Details Material: 1680D ballistic nylon / EVA plastic Color: black / anthracite Dimensions: 46.0 x 18.0 x 32.0 cm Total weight: 1.5 kg Total volume: 15.0-20.0 l Scope of delivery 2 x PRO BLAZE H saddlebags 2 x BLAZE spacer bars 2 x waterproof inner bags 1 x paint protection film/rubber scuff guardfor motorcycles with angular rear shapes 1 xHeat protection right made of glass fabric forfor PRO BLAZE saddlebag Fitting instructions Mounting material Details Material: 1680D ballistic nylon / EVA plastic / glass fabric Color: black / anthracite Total weight: approx. 5.7 kg Total volume: 40.0 l

The high version of the PRO BLAZE saddlebags is specially designed for motorcycles with high exhaust. Due to the elevated position, the bags are not affected by the heat radiation of the exhaust. SW-MOTECH manufactures this bag set with the matching spacer brackets. The PRO BLAZE saddlebags with removable spacer bars impress with their sporty look, low weight and clever mounting system. SW-MOTECH manufactures the bags from robust and particularly UV-resistant 1680D Ballistic Nylon. In combination with side walls made of dimensionally stable EVA material, the luggage is protected from splash water and dust. Developed specifically for sporty motorcycles, the saddlebags affect the driving characteristics only minimally. If you're traveling without luggage, you can remove the spacer bars with a flick of the wrist, leaving only inconspicuous mounts on the bike. The model-specific spacer bars, a high-performance Velcro strap and an additional securing strap with click closure ensure the best hold and prevent the bags from swinging in or flapping - even at high speeds. BLAZE spacer bars Removable spacer bars prevent contact between saddlebags and tires One-time installation of the model-specific, inconspicuous brackets of the spacer bars Attachment and removal of the spacer bars with a few simple steps Details Material: stainless steel / polyamide Color: silver / black Total weight: 0 .7 kg PRO BLAZE H Saddlebags Specially designed for motorcycles with a high exhaust pipe PRO BLAZE saddlebags with model-specific spacer bars allow conversion from sporty motorcycles to touring vehicles in seconds Low weight and sporty look Side panels made of dimensionally stable and laminated EVA material Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Heavy-duty Velcro strap additionally secures the left and right saddlebag and supports the weight of the luggage Top of Velcro tab covered with non-slip material for secure grip on pillion seat Zippered volume expansion Main compartment can be loaded from the top Outside pocket with covered zipper MOLLE attachment made of sturdy Hypalon material on the front for additional pockets Practical carrying handles Reflective details for increased safety in road traffic Details Material: 1680D Ballistic Nylon / EVA plastic Color: black / anthracite Dimensions: 46,0 x 18,0 x 32,0 cm Total weight: 1 ,5 kg Total volume: 15,0-20,0 l Scope of delivery 2 x PRO BLAZE H saddlebags 2 x BLAZE spacer bars 2 x waterproof inner bags 1 x paint protection film Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon / EVA plastic Color: black / anthracite Total weight: 4 ,4 kg Total volume: 40.0 l