LED auxiliary headlight Nova incl. universal mounting for tube Ø25-32mm Hepco & Becker
Description
Product information
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.
The brand new Nova LED auxiliary headlight - the next step in lighting technology.
- High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K
- 12 volt, 25 watts per headlight
- ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation)
- Improved lighting conditions in road traffic
- Universal mounting on engine or tank protection bracket with Ø25mm - Ø32mm tube, can be mounted upright or suspended
- complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set
- Connection only via the battery, no connection to vehicle wiring harness required
- No third-party operation thanks to special control unit with automatic voltage control
- Waterproof and dustproof to IP67
- Headlights can be added flexibly via the switch on the handlebars
Additional information:
- Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams.
- Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings.
- The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this.
- The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed.
- Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
| Accessories category: | Lighting |
|---|
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Zubehör Artikel
The Hepco & Becker tank protection bars perfectly trace the lines of the machine and give the motorcycle an individual character. In the event of a crash or unintentional ground contact, they can protect the motorcycle and rider from major damage and offer the best possible protection. A sensible purchase to avoid costly repairs in the event of an unexpected accident.The material absorbs the forces of impact in the best possible way. A crash bar should be replaced after a fall. Welded seams and the material may have suffered invisible damage and therefore no longer offer protection in the event of another fall. Individual parts or individual sides can be ordered from us by e-mail without any problems. protects tank, side fairing and stem high-quality surface finish equally useful when lashing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting material Engine guards do not have to be registered and do not require an ABE please observe the installation instructions provided and the model-specific information for any restrictions that may apply Model-specific information: Can be combined with Hepco & Becker engine guard or original engine guard The adapter set 42139556 is required when fitting 5029556 (H&B tank guard) with/or 5019556 (H&B engine guard) The adapter set 42139556 is not required when fitting to an already installed engine guard (Hepco & Becker or original) Mounting H&B engine guard: 1x 42139556 (adapter), mounting H&B tank guard: 1x 42129556 (adapter), H&B engine and tank guard: 1x 42139556 Honda guard and H&B guard: no adapter required.
Suitable for off-road, road and urban use Protection against unexpected incidents Protects motorcycle and rider from serious damage in the event of an accident or ground contact Exact tracing of the motorcycle lines Robust tube-in-tube construction from Hepco & Becker for individual character High-quality metal coating and MADE IN GERMANY Weight: 3.6 kg Model-specific information: Can be combined with Hepco & Becker tank protection bar or original tank protection bar The adapter 42139556 is required when fitting 5019556 (H&B engine guard) with / or 5029556 (H&B tank guard) The adapter set 42139556 is not required when fitting to an already installed tank guard (Hepco & Becker or original) Mounting H&B engine guard: 1x 42139556 (adapter), Mounting H&B tank guard: 1x 42129556 (adapter), H&B engine and tank guard: 1x 42139556 Honda guard and H&B guard: no adapter required.
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad. Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY comprehensive and easy-to-understand assembly instructions please refer to the stored installation instructions or the vehicle-specific instructions for any restrictions or information that may arise no ABE or registration is required Weight: 4.0 kg Color: black Scope of delivery: right + left incl. mounting material and instructions
The Hepco & Becker tank protection bars perfectly trace the lines of the machine and give the motorcycle an individual character. In the event of a crash or unintentional ground contact, they can protect the motorcycle and rider from major damage and offer the best possible protection. A sensible purchase to avoid costly repairs in the event of an unexpected accident.The material absorbs the forces of impact in the best possible way. A crash bar should be replaced after a fall. Welded seams and the material may have suffered invisible damage and therefore no longer offer protection in the event of another fall. Individual parts or individual sides can be ordered from us by e-mail without any problems. protects tank, side fairing and stem high-quality surface finish equally useful when lashing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting material Engine guards do not have to be registered and do not require an ABE please observe the installation instructions provided and the model-specific information for any restrictions that may apply Weight: 3.6 kg Model-specific information: Can be combined with Hepco & Becker engine guard or original engine guard The adapter set 42139556 is required when fitting 5029556 (H&B tank guard) with/or 5019556 (H&B engine guard) The adapter set 42139556 is not required when fitting to an already installed engine guard (Hepco & Becker or original) Mounting H&B engine guard: 1x 42139556 (adapter), mounting H&B tank guard: 1x 42129556 (adapter), H&B engine and tank guard: 1x 42139556 Honda guard and H&B guard: no adapter required.
Suitable for off-road, road and city use Protection against unexpected incidents Protects motorcycle and rider from serious damage in the event of an accident or ground contact Exact tracing of the motorcycle lines Robust tube-in-tube construction from Hepco & Becker for individual character High-quality metal coating and MADE IN GERMANY Weight: 3.6 kg Model-specific information: Can be combined with Hepco & Becker tank protection bar or original tank protection bar The adapter 42139556 is required when fitting 5019556 (H&B engine guard) with / or 5029556 (H&B tank guard) The adapter set 42139556 is not required when fitting to an already installed tank guard (Hepco & Becker or original) Mounting H&B engine guard: 1x 42139556 (adapter), Mounting H&B tank guard: 1x 42129556 (adapter), H&B engine and tank guard: 1x 42139556 Honda guard and H&B guard: no adapter required.
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The protective bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some new models have an integrated crash pad. protects in the event of crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or notes that may arise no ABE or registration is required Weight: 3.1 kg
Regardless of whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The protection bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required Weight: 3.15 kg Color: black