Filter by motorcycle model:
Aprilia RSV 4 cover for mirror mount
Covers mirror mounts "Aprilia Road Laser engraved logos Allow the removal of the mirrors when used on the race track including mounting hardware (bolts, washers & nuts) Color: black Important note: For track use only.
Barracuda Adapterringe für Lenkerendenspiegel oder B-LED-Blinker
Barracuda Adapterringe für Lenkerendenspiegel oder B-LED-Blinker Barracuda Rückspiegel-Adapterringe zur Montage von Barracuda Lenkerendenspiegel auf Barracuda B-Lux Lenkerendengewichten oder B-LED-Blinkern, Lieferung paarweise Produktkennzeichnung: Barracuda Spiegel Produkt Typ: Rückspiegel-Adapterringe für Lenkergewichte
Cover black for mirror mount for Moto Guzzi V7 III/ V9 Bobber/ V9 Roamer / V7 850
Caps for mirror mounting (Premium) Caps for closing the standard mirror mountings Useful when mounting the handlebar end mirrors (Premium) Material: Billet aluminum
Cover cap mirror hole / handlebar ends, black
Cover caps cover the original mirror mount and protect it from corrosion and refine the look on the handlebar. black 2-piece Ø=30mm, thread M6
Cover for mirror mount black for Aprilia RS 660 /Factory (25-) / RSV 4 1100 /Factory (25-)
For covering demoted mirrors. Note: Only intended for racetrack use.
Cover mirror mount for Honda Forza 750 (21-) - Barracuda
These adapters allow you to move the mirror mount from the front fairing to the handlebar. This gives you the possibility to mount all Barracuda mirrors on the handlebars of the Honda Forza 750. The set consists of 2 black anodized caps to cover the holes from the mirror mounts in the fairing, and 2 mirror mounts for the handlebars. These adapters require modification of the handlebar fairing.
HIGHSIDER pro clamp black For handlebar end mirror
HIGHSIDER pro spare part clamp for the short HIGHSIDER handlebar end mirrors. Suitable for 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be used for left and right side. Mirror can be mounted on the right and left as well as upright or hanging down. A joint on the clamp gives the short, matching version additional adjustment options for a better view. The surface is black anodized. Scope of delivery: 1 piece
HIGHSIDER pro Clamp Black For Handlebar End Mirror (1pc)
HIGHSIDER pro spare part clamp for the short HIGHSIDER handlebar end mirrors. Suitable for 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be used for left and right side. Mirror can be mounted on the right and left as well as upright or hanging down. A joint on the clamp gives the short, matching version additional adjustment options for a better view. The surface is anodized black.
HIGHSIDER pro cover caps black CNC, M10
HIGHSIDER CNC cover caps for M10 mirror threadThe high-quality aluminum caps in rich, trendy matt black or glossy black and brand logo cover the original mirror mount - thus protecting against corrosion and enhancing the look on the handlebars. There is a rubber coating on the cylinder for an optimum fit. The caps are ideal for converting to handlebar end mirrors.Tailor-made for your bike, the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike as you wish.Dimensions:Diameter: 16 mmCylinder diameter: 7.8 mmDepth: 11 mmScope of delivery: 1 pair
HIGHSIDER pro cover caps Black Matt CNC, For M10
HIGHSIDER CNC cover caps for M10 mirror threadThe high-quality aluminum caps in rich, trendy matt black or glossy black and brand logo cover the original mirror mount - thus protecting against corrosion and enhancing the look on the handlebars. There is a rubber coating on the cylinder for an optimum fit. The caps are ideal for converting to handlebar end mirrors.Tailor-made for your bike, the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike as you wish.Dimensions:Diameter: 16 mmCylinder diameter: 7.8 mmDepth: 11 mmScope of delivery: 1 pair
HIGHSIDER pro cover caps black set B, 2 pcs, For BMW
HIGHSIDER CNC FRAME CAP set, 2-piece or 7-piece Suitable for BMW RnineT from 2014-2016 (complete set) ATTENTION: From model year 2016, the frame has been changed on some models. As a result, the cover cap (vehicle side viewed from the left) does not fit on the top right (above the cylinder head - injection nozzle)! ---SEEE PHOTO---The black anodized aluminium caps cover the frame holes of the BMW RnineT. Combined with polished chamfers, these caps stand for a classy, stylish design and are a perfect match for our HIGHSIDER CONERO series. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Dimensions 2-piece set:Locking cover, left = A: 49mm: B:42mm: C:13mmLocking cover, right = A: 58mm: B:48mm: C:10mmDimensions 7-piece set:Swingarm locking cover = A: 49mm: B:42mm: C:13mmSwingarm cover = A: 58mm: B:48mm: C:10mmUpper swingarm cover = A: 26mm: B:18mm: C:12mmLower engine cover = A: 32mm: B:25mm: C:12mmUpper motor cover = A: 40mm: B:32mm: C:12mm (for some models from 2016 fit problems!)Upper engine cover = A: 39mm: B:30mm: C:12mmScope of delivery: 1 set, 2-piece1x rocker cover, left1x rocker cover, rightScope of delivery: 1 set, 7-piece1x Swing arm cover, left1x Swing arm cover, right1x Upper swing arm cover, right2x Lower engine cover, right / left1x Upper engine cover, front1x Upper engine cover, rear
HIGHSIDER pro handlebar adapter black For Aprilia and Moto Guzzi models (pair)
HIGHSIDER M6 handlebar adapter for various Aprilia and Moto Guzzi models.This special handlebar adapter is suitable for mounting various HIGHSIDER handlebar end weights, handlebar end mirrors and lever guards directly on the original handlebars of Aprilia and Moto Guzzi.Dimensions:Outer diameter: 34.5 mmBore diameter: 6.5 mmThickness: 6 mmScope of delivery: 1 x pair
HIGHSIDER pro handlebar adapter black For original KTM handlebars (pair)
HIGHSIDER handlebar end adapter for various KTM motorcyclesThis special adapter makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of KTM motorcycles. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever guards can still be used here. The HIGHSIDER handlebar accessories can now be fitted to various KTM handlebars. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions - Adapter disks:Outer diameter: 17mmInner diameter Bore: 6.5mmHeight: 5mmNOTES:Handlebar end mirrors with external clamping do NOT require handlebar ends with handlebar end mirror mounts, such as the HIGHSIDER D.E.g. HIGHSIDER DOT, HIGHSIDER CURVE, HIGHSIDER TETRA, HIGHSIDER AKRON-LS, HIGHSIDER VENTURA-LS, HIGHSIDER ESAGANO-LS, ect.
HIGHSIDER pro handlebar adapter For BMW (pair)
HIGHSIDER handlebar adapterSuitable for the BMW R 1200 Nine T ABS, 14- and S 1000 R ABS, 14-16 This special handlebar adapter is suitable for mounting various HIGHSIDER handlebar end weights and handlebar end mirrors directly on the original handlebars of the BMW R nine T. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsBolt: M12Internal thread: M6 Scope of delivery: 1 pair incl.2 x threaded sleeves2 x washers
HIGHSIDER pro handlebar adapter For various BMW models (pair)
HIGHSIDER mounting kit for various BMW motorcyclesThis special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of BMW motorcycles. Using a suitable slotted screwdriver, the M10 threaded sleeves with M6 internal thread are screwed into the existing thread in the handlebars. The HIGHSIDER handlebar accessories can now be fitted to the BMW handlebars using the M6 central screw. If necessary, the washers included in the set can be used to create sufficient clearance between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Outside: M10 x 1.5Inside: M6 x 1Washer:Outer diameter: 18 mmInner diameter: 6.5 mmThickness: 1.6 mmScope of delivery:2 x threaded sleeves2 x washersNOTE: Some BMW motorcycle models MAY not be suitable for HIGHSIDER handlebar end mirrors WITH integrated LED indicators. The handlebar end mirrors with LED indicators can also be fitted to original BMW handlebars with the adapter kit by omitting the expanding sleeve. If the handlebar end mirror cannot be screwed far enough into the handlebars, there will be too much space between the handle and the attachment.
HIGHSIDER pro handlebar adapter For various Kawasaki models (pair)
HIGHSIDER M8 mounting kit for various Kawasaki motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of Kawasaki motorcycles. The 8 x 1.25 threaded sleeves with M5 internal thread are screwed into the existing thread in the handlebars using a suitable slotted screwdriver. M5 x 30 mm screws are supplied to match the threaded sleeve with M5 internal thread. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever protectors are replaced by the M5 screws The HIGHSIDER handlebar accessories can now be fitted to the Kawasaki handlebars. If necessary, the washers included in the set can be used to create a sufficiently large gap between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Threaded sleeves Outside: M8 x 1.25 Inside: M5 x 30 mm Washer: Outer diameter: 15 mm Inner diameter: 5.3 mm Adapter screw: M5 x 30 mm Spacer washer: Diameter: 28 mm Thickness: 8 mm Hole: 5.3 mm Scope of delivery: 2 x threaded sleeves 2 x washers 2 x M5 screws 2 x spacers Note: Not suitable for handlebar end mirrors with LED indicators
HIGHSIDER pro handlebar adapter M12x1.25_M6, For various Suzuki models (pair)
HIGHSIDER handlebar adapter for various Suzuki models.This adapter allows the mounting of various handlebar weights, handlebar end mirrors and lever guards from the HIGHSIDER program directly on the original handlebar.Adapter thread:Outside: M12x 1.25Inside: M6x1Adapter:Length: 20 mmSlot depth: 3mmSlot width: 3mmScope of delivery:1 x pair
HIGHSIDER pro handlebar adapter M16, For Harley-Davidson models (pair)
HIGHSIDER M16 handlebar adapter for various Harley-Davidson models. This special handlebar adapter (M16 bolt with M6 internal thread) is suitable for mounting various HIGHSIDER handlebar end weights, handlebar end mirrors and lever guards directly on the original handlebars of the Harley-Davidson. Please check the thread diameter of the handlebar beforehand! Suitable for all HIGHSIDER (EVO, CONERO, etc.), LSL and SHIN YO sleeve clamp systems. Dimensions: Adapter thread: Outer: M16 Outer thread length: 15.5 mm Inside: M6 Internal thread length: 15 mm Adapter: Total diameter: 30 mm Total length: 20 mm Scope of delivery: 1 pair NOTICE: With some Harley-Davidson motorcycle models, it CAN happen that HIGHSIDER handlebar end mirrors WITH integrated LED indicators are not suitable. The handlebar end mirrors with LED indicators can also be fitted to Harley-Davidson original handlebars using the adapter kit - by omitting the expanding sleeve. If the handlebar end mirror cannot be screwed far enough into the handlebars, there will be too much space between the grip and the attachment.
HIGHSIDER pro handlebar adapter M16, For various Yamaha models (pair)
HIGHSIDER M16 mounting kit for various Yamaha motorcycles This special mounting kit enables the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards to be fitted to the original handlebars of Yamaha motorcycles. Using a suitable slotted screwdriver, the M16 x 1.5 threaded sleeves with M6 internal thread are screwed into the existing thread in the handlebars. The HIGHSIDER handlebar accessories with M6 central screw can now be fitted to the Yamaha handlebars. In order to create a sufficiently large distance between the handlebar and the attachment, the washers included in the set can be used if required. Dimensions: Adapter thread: Outer: M16 x 1.5 Thread length: 17 mm Adapter: Overall diameter: 20.9 mm Length: 35 mm Inside: M6 Washer: Outer diameter: 19 mm Inner diameter: 8.5 mm Scope of delivery: 2 x adapters 2 x washers
HIGHSIDER pro handlebar adapter M8
HIGHSIDER D17 mounting kit for various Honda motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of Honda motorcycles. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Outer diameter: 17.4 mm Inner diameter: 6.2 mm Length: 35 mm Scope of delivery: 1 pair
HIGHSIDER pro handlebar adapter M8, For various models
HIGHSIDER mounting kit for various motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of motorcycles. The 8 x 1.25 threaded sleeves with M5 internal thread are screwed into the existing thread in the handlebars using a suitable slotted screwdriver. M5 x 30 mm screws are supplied to match the threaded sleeve with M5 internal thread. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever protectors are replaced by the M5 screws The HIGHSIDER handlebar accessories can now be mounted on the handlebars. If necessary, the washers included in the set can be used to create sufficient clearance between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Threaded sleeves Outside: M8 x 1.25 Inside: M5 Washer: Outer diameter: 15 mm Inner diameter: 5.3 mm Thickness: 1.6 mm Adapter screw: M5 x 30 mm Scope of delivery: 2 x threaded sleeves 2 x washers 2 x M5 screws
HIGHSIDER pro mirror nut black 14 mm, M10 x 1.25 RH
Mirror nut 14 mm, M10 x 1.25 right-hand thread, for mirror arms with 10 mm diameter.
HIGHSIDER pro mirror nut chrome 14 mm, M10 x 1.25 RH
Mirror nut 14 mm, M10 x 1.25 right-hand thread, for mirror arms with 10 mm diameter.
HIGHSIDER smart mirror clamp Black With right-hand thread For CNC, For 1 inch handlebars
HIGHSIDER smart CNC mirror clampAluminum clamp, suitable for 1 inch handlebars (25.4 mm) and mirrors with a 10 mm right-hand thread Scope of delivery: 1 piece