HIGHSIDER pro Classic Button Chrome For 7/8 and 1 inch handlebars
Article number:
BI-1108641002
Manufacturer:
Highsider
Description
Product information
HIGHSIDER CNC button CLASSIC, suitable for 7/8 and 1 inch handlebars
CNC milled switch with two buttons. Universal use for controlling load relays, switching various modes on speedometers, etc.
Connections:
Button A : green and red (from below)
Button B : green and brown Green is input signal
Dimensions:
Width: xx mm
Depth: xx mm
Button Ø: 4.5 mm
Rubber: 75 mm x 0.3 mm
Allen screws: M3x 5 mm
Cable length 570 mm
Scope of delivery:
1x button
1x rubber
2x screws
Note:
NOT FOR CURRENTS above 0.05 amps. So at 12 volts max. 0.6 watts.
CNC milled switch with two buttons. Universal use for controlling load relays, switching various modes on speedometers, etc.
Connections:
Button A : green and red (from below)
Button B : green and brown Green is input signal
Dimensions:
Width: xx mm
Depth: xx mm
Button Ø: 4.5 mm
Rubber: 75 mm x 0.3 mm
Allen screws: M3x 5 mm
Cable length 570 mm
Scope of delivery:
1x button
1x rubber
2x screws
Note:
NOT FOR CURRENTS above 0.05 amps. So at 12 volts max. 0.6 watts.
Manufacturer
Highsider
|
Paaschburg & Wunderlich GmbH |
Reviews 0
Login
No reviews found. Share your insights with others.