LED indicators and 3-in-1 multifunctional rear light ETERNAL Chaft

This pair of 3-in-1 multi-function LED rear lights in shell shape, compliant with European CE standards, will highlight your motorcycle with sobriety. Its system combines brake light, indicator light and turn signal in the same assembly. A high quality aluminum product, cut from black solid. 12V - 2.7W Diameter of 22 millimeters Length 37 millimeters Depth 39 millimeters Technical data : Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = earth (-)

Pair of modern design indicators with integrated position light. State-of-the-art lighting technology in a robust black plastic housing, with rubber grip and tinted glass, E-approved Dimensions: A: 90.mm B: 69 mm C: 15.mm Threaded bolt: M8 x 1.25 mm Technical data : Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = ground (-)

The ecological and economical 5-fold biodegradable wood viscose wipe cleans WITHOUT WATER and without rinsing for one-off or recurring maintenance on the interior and exterior of all vehicles. The wipe enables maintenance, cleaning and restoration of the new shine in a single operation. Formula 5 actions: Cleans. Protects. Antistatic. Water repellent. High gloss. Can be used on all surfaces: Bodywork, rims, paint, interior and exterior plastics, trim, windshields, windows, windscreens, optics, chrome, Skai and leather upholstery The pack of 80 cloths contains microfiber for a perfect, streak-free finish.

A pair of indicators in a modern design with integrated rear light. State-of-the-art lighting technology in a sturdy black plastic housing, with rubber grip and red glass. A transparent surface for the indicator light is integrated in the glass. E-approved for rear. Dimensions: A: 90.mm B: 15.mm Depth: 22.5 mm Threaded bolt: M8 x 1.25 mm Technical data : Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = ground (-)

Power resistor for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 10 Ohm 21 Watt Scope of delivery: 1 pair Please noteresistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = ground (-)

Power resistor for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 10 Ohm 21 Watt Scope of delivery: 1 pair Please noteresistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = ground (-)

Pair of power resistors for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 27 Ohm 25 Watt Scope of delivery: 1 pair Note: Resistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = earth (-)

Power resistor for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 8 Ohm 21 Watt Scope of delivery: 1 pair Note: Resistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = earth (-)

Power resistor for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 10 Ohm 21 Watt Scope of delivery: 1 pair Please noteresistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = ground (-)

Pair of power resistors for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 27 Ohm 25 Watt Scope of delivery: 1 pair Note: Resistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = earth (-)

Pair of power resistors for LED indicators. Depending on the flasher relay installed, there may be problems with the flashing frequency when fitting LED indicators. These resistors provide a remedy, as they simulate approx. 17.5 watts of power at 12V. Technical data: 27 Ohm 25 Watt Scope of delivery: 1 pair Note: Resistors must always be connected in parallel. Technical data: Yellow cable = rear light (+) Red cable = brake light (+) Blue wire = indicator (+) Black wire = earth (-)