Oil filler plug engine oil for Vespa GTS Super 125cc 4T LC Euro 3 (09-16), black matt

  for Vespa LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L  Details: round Ø 100 mm Aluminum black matt anodized Low vibration for mounting with Ø29.8mm E-mark on glass Mounting note: Mounting Kit part no. MV502954 / MV502955 / MV502956 / MV502957 / MV502958 / MV502959 / MV502960 / MV502961 / MV502962 or bar end weights MV005750 are required.  

for Vespa ET4/LX/LXV/S/GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm The SIP PORDOI cover for the clutch nut on the vario cover is CNC machined from high quality aluminum. The delivery includes mounting hardware, the standard rubber bumpers in the vario cover can still be used. The unusual design is also reflected in attachments such as the swingarm cover or the oil dipsticks. Aluminum CNC black matt anodized with bar Note: For mounting, spacer bushings as well as small screws are supplied, which must be inserted into the existing threads. The screws should be screwed into the cover with threadlocker.

On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The installation is very simple with the enclosed O-ring, put on the rim and ready. Ø 42 mm Aluminum CNC black matt anodized

The CNC-machined sport levers SIP PORDOI are ideal for sporty ambitious drivers not only because of the look. The levers are about 4cm shorter than the original levers, the 2-finger operation of the front and rear brake is so easily possible. The soft radii at the front of the brake levers provide a very comfortable and secure grip feeling during braking. Aluminum CNC milled Anodized, black matt Excellent ergonomics and feel Supplied in pairs

for Vespa ET2/ET4/LX/LXV/S/Primavera/Sprint/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300cc 2T/4T With the magnetic fuel cap from the PORDOI SERIES from SIP Scootershop, many problems at the fuel stop are finally a thing of the past. A long overdue innovation with many advantages. At every refueling stop the same dilemma: Where to put the fuel cap? Either it disappears in the completely overloaded helmet compartment, rolls over the gas station floor or is even forgotten at the gas pump - at the latest then not only an immense mess is pre-programmed during the ride, because the leaking fuel spreads over the rear wheel and the accident risk increases. Not to mention the consequences for the environment and nature. The included pad can be glued, for example, on the inside of the seat or in the helmet compartment. Aluminum CNC milled black matt anodized magnetic Installation note: The surface for the adhesive pad should be free of dust and grease before attaching. To avoid damage to the paint, please do not attach the tank cap to the frame.

  Details: Aluminum CNC black matt anodized with O-ring        

for Vespa ET2/ET4/LX/LXV/S/GTS/GTS Super/GTV/GT 60/GT/GT L 50-300 ('03-'13/'17-), fits also Vespa Primavera/Sprint ('17-) The SIP PORDOI Swingarm cover is CNC machined from high quality aluminum. The noble design and the perfect workmanship as well as loving details like the lasered SIP logo or the lasered torque indication at the bolting points make this cover a real eye-catcher. The assembly is done with the help of the enclosed grub screws on the swingarm. Aluminum CNC black matt anodized Note: The PIAGGIO swingarms have production-related partial casting burrs, here the swingarm covers can protrude. If the swingarm cover does not go cleanly over the swingarm, the swingarm may need to be slightly deburred.

for Vespa ET4/LX/LXV/S/GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm The SIP PORDOI cover for the clutch nut on the vario cover is CNC machined from high quality aluminum. The delivery includes mounting hardware, the standard rubber bumpers in the vario cover can still be used. The unusual design is also reflected in attachments such as the swingarm cover or the oil dipsticks. Aluminum CNC black matt anodized without bar Note: For mounting, spacer bushings as well as small screws are supplied, which must be inserted into the existing threads. The screws should be screwed into the cover with threadlocker.

Conventional bar end weights are often too light for the flutter-prone GTS handlebar. Particularly heavy weights minimize handlebar flutter, but are clunky and do not fit visually at all on the GTS. Not so the SIP PORDOI bar end weights - thanks to the slim line, the vibration dampers fit inconspicuously on the handlebar. Nevertheless, the bar ends have a high weight to minimize handlebar flutter. The weights are made of high-strength steel CNC. Special feature: by removing the spacer ring, handlebar end mirrors can also be attached to the handlebar end weights - without additional bushings. In addition to the two weights, the scope of delivery includes the spacer rings with O-rings and screws. L 60 mm Ø outside 38 mm Weight per side: approx. 382g Steel black matt incl. cover caps (black) for mounting with / without handlebar end mirrors

On the front wheel is mounted as standard a cheap sheet metal cover, CNC machined caps from the accessories are a matter of taste and sometimes overpriced. The SIP dust cap is CNC machined from high quality aluminum and is anodized in different colors. The assembly is very simple with the enclosed O-ring, put on the rim and ready. Ø 45 mm Aluminum CNC black matt anodized

The original fender nipples for the Modern Vespa are often too high and disturb the optics of the Vespa. The SIP SERIES PORDOI Fender nipple is designedon the fender fins of the classic Vespa models and accordingly extremely flat and narrower than usual. So he does not wear too thick, but still looks cool. Like the original, the fender nipple is screwed from below on the fender, all necessary mounting parts are included. Special gimmick on the fender nipple: Silicone wristbands can be attached here. So the fender nipple can be customized quickly and easily. To show the flag you can equip the fender nipple with the matching rubber wristband of your club, or purchase SIP Limited Editions at various events. Aluminum CNC black matt anodized screwed