RS 660 /Factory 2025- (XGA, XGH)
Available categories
Matching articles
Adjustable footrest system for Aprilia RS 660 /Factory / Tuono 660/Factory
Adjustable rider footrests made from CNC-milled aluminum. The footrests are multi-adjustable for an optimum riding position. Suitable for inverted shifting scheme. Note: For race track use only.
Basic tank ring incl. tank bag closure unit for Aprilia RS 660 / Factory (25-)
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap in the direction of travel at the front of the tank bag and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3.0 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications, as well as the model-specific information on the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system Not suitable for: Street Enduro M, Epic 16 Epic 11 and Epic 13 only possible with 6mm elevation plate (710506001)
Brake lever black, Racing for Aprilia RS/Tunono 660 (20-) RSV4
Brake lever black, Racing for Aprilia RS/Tunono 660 (20-) RSV4
C-Bow side carrier black for Aprilia RS 660 / Factory (25-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be simply and easily attached to the C-Bow with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 3.5 kg Color: black Scope of delivery Carrier mount left Carrier mount right 2x C-Bow holder Complete mounting material Illustrated installation instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags Not compatible with C-Bow horizontal or vertical installation Not socius-compatible with bags fitted
Clutch lever black, Racing for Aprilia RS/Tuono 660 (20-) RSV4
Clutch lever black, Racing for Aprilia RS/Tuono 660 (20-) RSV4
Comfort gel seat rider for Aprilia RS 660 /Factory / Tuono 660
Comfort seat with gel inserts. Cover in stylish, sporty carbon look. For riders who want even more riding comfort and absolute grip in the saddle of their RS 660 / Tuono 660.
Cover for mirror mount black for Aprilia RS 660 /Factory (25-) / RSV 4 1100 /Factory (25-)
For covering demoted mirrors. Note: Only intended for racetrack use.
Decor set Wheel stickers rim bed for Aprilia RS 660 / Tuono 660
Precisely fitting decorative strips for gluing into the rim well for an even sportier look. - UV-resistant decor kit to stick on.
Foot brake lever aluminum red for Aprilia RS 660 /Factory / Tuono 600 Factory (25-)
The red anodized brake lever made of CNC-milled billet aluminium replaces the standard brake lever and gives the motorcycle a real racing style.
Footrests aluminum red for Aprilia RS 660 /Factory / Tuono 600 Factory (25-)
CNC-machined rider footpegs made from high-quality billet aluminium, anodized red. Designed for optimized grip and excellent control, they also enhance the bike's aesthetics by giving it a real racing-inspired style.
Front mudguard carbon for Aprilia RS 660 /Tuono 660 (20-), RSV4 1100 /Tuono V4 1100 (21-)
Front wheel cover made of high-quality carbon, with a matt finish and sporty aesthetics. This item is road-legal.
Gearshift aluminum red for Aprilia RS 660 /Factory / Tuono 600 Factory (25-)
The red anodized shift lever made of CNC-machined billet aluminium replaces the standard shift lever and gives the motorcycle a real racing style. It offers excellent control and precision, while the anodized surface prevents corrosion and maintains the sporty color.
GPS sensor for Aprilia RS 660 /Tuono 660 /RSV4 / Tuono V4 1100 (25-)
GPS module that enables the automatic recording of lap times on the racetrack, just like on racing bikes. This GPS sensor in conjunction with the new Aprilia MIA and the associated app allows the biker to make some adjustments in certain areas of the track. Suitable for: Aprilia RSV 4 1100 ABS 4T 16V LC - 2025 Euro 5+ Aprilia Tuono V4 1100 4T 16V LC ZD4XRA - 2025 Euro 5+ Aprilia Tuono V4 1100 Factory 4T 16V LC ZD4XRB00 - 2025 Euro 5+ Aprilia RS 660 4T 8V LC ZD4XGA00 2025 Euro 5+ Aprilia RS 660 Factory 4T 8V LC ZD4XGH00 2025 Euro 5+ Aprilia Tuono 660 Factory ABS 4T 8V LC ZD4XGG00 2025 Euro 5+
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-X LED rear light black/red E-approved (1pc)
HIGHSIDER AKRON-X LED rear light with red glass, E-approved - State-of-the-art technology in a timelessly elegant look - The timeless but striking design language characterizes the design of the HIGHSIDER AKRON-X rear light. The bead-blasted aluminium housing impresses with its black matt anodization. You can adjust the rear light via the adjustable stem in a range of up to 37° and therefore position it perfectly on your bike. Powerful SMD technology under the dark red glass ensures powerful illumination so that you cannot be overlooked. Be seen with safety - the AKRON-X rear light offers you the safety you need on your bike and the look you want. Our accessory TIP: Visually matching in combination with the products of the AKRON series. The rear light picks up on the design language of the handlebar ends, grips and indicators with its design elements and turns your bike into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. You can customize your bike with the highest level of quality and functionality. Dimensions: A Diameter: 39 mm B Width: 45 mm C Depth: 47 mm Connections: Black cable = ground (-) White cable = rear light (+) Red cable = brake light (+) Scope of delivery: 1 piece, including mounting and connection material
HIGHSIDER pro Apollo Bullet LED rear light, brake light, blinker black/toned 3in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 3in1 LED rear light, brake light, blinker, for rear E-approved. LED rear light, brake light, blinker unit in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Saving the best for last - be seen in safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster Dimensions:A: 22 mmB :34 mmD: 40 mmThreaded bolt: M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+) Scope of delivery: 1 pair
HIGHSIDER Pro Apollo Bullet LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO BULLET LED indicators, for front and rear E-approved. Power LED blinker in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 22 mmB: 34 mmD: 40 mm Threaded bolt M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = blinker (+) Scope of delivery: 1 pair Note: E-approved for front and rear. Can be ordered as an option:HIGHSIDER Rear light/indicator APOLLO BULLET, article no. 254-171HIGHSIDER Indicator/position light APOLLO BULLET, article no. 204-173
HIGHSIDER pro Apollo Bullet LED turn signal/position light black/tinted 2in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 2in1 LED indicator/position light, for front E-approvedLED indicator/position light in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Installation location: FrontDimensions:A: 22 mmB: 34 mmD: 40 mmThreaded bolt M8 x 17 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)White cable = parking light (+)Scope of delivery: 1 pair
HIGHSIDER Pro Apollo Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER pro Apollo Classic LED rear light, brake light, blinker black/tinted 3in1, E-approved (pair)
HIGHSIDER APOLLO CLASSIC LED rear light, brake light, blinkerWith tinted glass and aluminum housing in chrome or black, E-approved for rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center. The outer ring, on the other hand, consists of COBs (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Be seen with safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster. Dimensions: A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mm Stem length: 16 mm Threaded bolt: M8 x 1.25 Connections: Black cable = earth (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+)Scope of delivery: 1 pair