RS4 / RS 125 2011-2020 (TW, KC)
Available categories
Matching articles
Aprilia RSV 4 cover for mirror mount
Covers mirror mounts "Aprilia Road Laser engraved logos Allow the removal of the mirrors when used on the race track including mounting hardware (bolts, washers & nuts) Color: black Important note: For track use only.
ATHENA Top End cylinder gasket set
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer make it possible to improve engine performance and maintain its reliability at the same time.Cylinder gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauled
Blinker front left / rear right for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
Blinker front right / rear left for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
Front fairing left carbon look for Aprilia RS4 125
Front fairing left plastic in carbon look. for Aprilia RS4 125
Front fairing left carbon look for Aprilia RS4 125
Front fairing left plastic in carbon look. for Aprilia RS4 125
Front fairing right carbon look for Aprilia RS4 125
Front fairing right plastic carbon look for Aprilia RS4 125
Front fairing right carbon look for Aprilia RS4 125
Front fairing right plastic carbon look for Aprilia RS4 125
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front left, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 Volt DC wiring systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front leftExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front right, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt DC electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front rightExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VL/HR, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VR/HL, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kurzer Kennzeichenhalter inkl. Kennzeichenbeleuchtung für Aprilia RS4 125 / Tuono V4 / RSV 4 Factory
Der HIGHSIDER Kennzeichenhalter AKRON-RS passt sich durch sein Design optimal an die Linienführung Deines Bikes an.Passend für: Aprilia RSV4 09-20, Tuono V4 11-20, RS4 125 11-, RS 125 17-, Tuono 125 17-, inkl. Kennzeichenleuchte (E-Geprüft)Die modellbezogene Halterung des AKRON-RS ermöglicht die Montage an den originalen Befestigungspunkte Deines Bikes und somit einen Austausch ohne weiteres bohren oder schneiden.Um Beschädigung von Kabeln zu vermeiden, sind alle scharfkantigen Durchführungen durch eine Gummi-Membrantülle geschützt.Die Kennzeichenplatte ist aus Stahlblech und 2 mm stark. Der präzise Zuschnitt erfolgt per Laser. Nach dem Kanten folgt noch die witterungsbeständige, schwarze Pulverbeschichtung.Damit sind die optimale Passform und Langlebigkeit gesichert.Durch die stufenlose Verstellmöglichkeit kannst Du die Platte ohne bohren in die gewünschte Position bringen. Um die Platte in dieser Position zu halten, gibt es eine zusätzliche Sicherungsschraube.Die Blinkerhalterungen des AKRON-RS sind in der Breite verstellbar und damit für jede Art von Zubehör-Blinkern geeignet. Durch diese Verstellmöglichkeit kannst Du die Position für Deine Blinker den unterschiedlichsten Kennzeichen anpassen. Um die Montage der Blinker ohne Trennung vom Kabelbaum zu ermöglichen, sind die 10 mm Bohrungen zur Seite hin geschlitzt.Auch die Position des Rückstrahlers kannst Du über einen Schieber individuell einstellen. Eine Anpassung an die unterschiedlichen Ausführungen der EU-Kennzeichen ist somit kein Problem.Um das Kennzeichen sicher zu verschrauben und Vibrationen zu reduzieren sind im Lieferumfang zwei Gummischeiben enthalten. Ein weiterer Gummi-Puffer stützt das Kennzeichen an seiner Unterseite.Details:• modellbezogene Halterung• stufenlos verstellbare Blinkerhalter• geschlitzte Blinkeraufnahme für einfache Montage ohne Kabeltrennung• stufenlos verstellbarer Reflektor, E-Geprüft• passend für europäische Nummernschilder• stufenlos verstellbarer Neigungswinkel• zusätzliche Schraube für optimalen Positionssicherheit• einfache Fixierung ohne weitere Arbeitsschritte (z.B. Bohren)• einfache Montage des Kennzeichens durch LanglöcherZum Lieferumfang des AKRON-RS gehören:• Modellbezogene Halterung mit Montageteilen• AKRON-RS Kennzeichenhalteplatte• Verstellbare Blinker-Halterungen• E-Geprüfter Rückstrahler mit einstellbarem Halter• MontageanleitungHinweise:• Für die Originalblinker steht optional im Reiter Zubehör ein spezieller Blinkerhalter zur Verfügung.• Sollten an Deinem Original-Kennzeichenhalter seitliche Reflektoren montiert sein, müssen diese an geeigneter Position wieder angebracht oder durch neue ersetzt werden.Tipps:Solltest du keinen modellspezifischen Kennzeichenhalter für Dein Fahrzeug gefunden haben, sind die Universal-Kennzeichenhalter von HIGHSIDER, die es in vielen verschiedenen Ausführungen gibt, sicher eine gute Alternative.
LeoVince exhaust system SBK LV One Evo 2, stainless steel for Aprilia RS4 125 (Bj.11-16)
The new LV ONE EVO STAINLESS STEEL is the synthesis between tradition and modernity. It offers visually the classic look of LeoVince silencers, but with the highest performance and lightest materials of today. made entirely of TIG welded AISI 304 stainless steel oval shape flattened at the top and bottom Carbon end cap Carbon retaining clip Manufacturer name lasered directly into the muffler the stainless steel mufflers are glass bead blasted, this gives a nice titanium look for the carbon models a great finish is achieved by the carbon outer shell excellent price-performance ratio Weight 4,17 kg Approval: e-approvedThe exhaust system complies with the noise regulations of the EC directive 97/24 ch. 9. Please check if the use of a catalytic converter is necessary to comply with the EC directive 97/24 ch. 5 regarding the emission values of the exhaust gases.
MRA original molding disc "O" black APRILIA RSV 4 -125 RK
Same dimensions and size as the original windshield Easy replacement with the original windshield, no modification of the fairing necessary Original screws can be used Edge protector included With ABE - no registration necessary Picture shows screen in dark tinted Suitable for: ManufacturerModelfrom year of constructionuntil year of manufacture Aprilia RS4 125 2011 2015 Aprilia RS4 50 2011 2015 Aprilia RSV4 2009 2014
MRA original molding disc "O" black APRILIA RSV 4 -125 RK
Same dimensions and size as the original windshield Easy replacement with the original windshield, no modification of the fairing necessary Original screws can be used Edge protector included With ABE - no registration necessary Picture shows screen in dark tinted Suitable for: ManufacturerModelfrom year of constructionuntil year of manufacture Aprilia RS4 125 2011 2015 Aprilia RS4 50 2011 2015 Aprilia RSV4 2009 2014
MRA original molding disc "O" colorless APRILIA RSV 4 -125 RK
Same dimensions and size as the original windshield Easy replacement with the original windshield, no modification of the fairing necessary Original screws can be used Edge protector included With ABE - no registration necessary Attention: Picture shows windshield in smoke gray Suitable for: ManufacturerModelfrom year of constructionuntil year of construction Aprilia RS4 125 2011 2015 Aprilia RS4 50 2011 2015 Aprilia RSV4 2009 2014