Diavel 1200 2011-2018 (G1, GC, GD)
Available categories
Matching articles
Alurack top case carrier for Ducati Diavel 1200 (11-18) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5kg payload in the top case (please observe vehicle-specific information, the stored assembly instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 4.2 kg Color: black Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
ARROW Auspuff RACE TECH für Ducati Multistrada 1200 / Diavel / Monster 1200 / Monster 821 aus Carbon
ARROW Auspuff RACE TECH für Ducati Multistrada 1200 / Diavel / Monster 1200 / Monster 821 aus Carbon ARROW RACE-TECH Endschalldämpfer mit Carbon-Hülle und Carbon-Endkappe, mit herausnehmbarem dB-Killer Einsatz, mit Straßenzulassung. Für Ducati Multistrada 1200/S, Typ A2, Modelljahr 2010-14 Multistrada 1200, Typ A3, Modelljahr 2013-14 Diavel, Typ G1, Modelljahr 2011-16 Monster 1200, Typ M6, Modelljahr 2014-15 Monster 821, Typ M6, Modelljahr 2014-16 Nur in Verbindung mit ARROW-Zwischenrohr / Krümmer gemäß Verwendungsliste zu montieren! Produktkennzeichnung: Abgastechnik ARROW Hinweis: Zur Montage notwendig: für Monster 821: ARROW Zwischenrohr AR-71451KZ mit Kat (homologiert) oder AR-7145MI ohne Kat (nicht homologiert) für Multistrada 1200: ARROW Krümmer AR-71429KZ mit Kat (homologiert) oder AR-71429MI ohne Kat (nicht homologiert) für Diavel und Monster 1200: ARROW Zwischenrohr AR-71451KZ mit Kat (homologiert) oder AR-71451MI ohne Kat (nicht homologiert) Produkt Typ: ARROW RACE-TECH Multistrada/Diavel 10-/11- Carbon
BMC Racingluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018
BMC Racingluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018 BMC Racingluftfilter für Ducati 848 EVO/S (Modelljahr 2008-2013) 1098 S/R (Modelljahr 2007-2009) 1198 S/R/SP (Modelljahr 2009-2011) Diavel 1200 (Modelljahr 2011-2018) Multistrada 1200/S (Modelljahr 2010-2014) Streetfighter 1100/848 S (Modelljahr 2009-2015) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Racingluftfilter für Ducati
BMC Sportluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018
BMC Sportluftfilter für Ducati 848/1098/Diavel/Multistrada/Streetfighter 2008-2018 BMC Luftfilter für Ducati 848 EVO/S (Modelljahr 2008-2013) 1098 S/R (Modelljahr 2007-2009) 1198 S/R/SP (Modelljahr 2009-2011) Diavel 1200 (Modelljahr 2011-2018) Multistrada 1200/S (Modelljahr 2010-2014) Streetfighter 1100/848 S (Modelljahr 2009-2015) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Luftfilter für Ducati
C-Bow side carrier black for Ducati Diavel 1200 (11-18) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.7kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Easyrack top case carrier for Ducati Diavel 1200 (11-18) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored assembly instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 4.3 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Electrosport controller
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Electrosport stator
ElectroSport stators are designed as a direct replacement for the original equipment Manufactured for higher power loads Developed in the USA One of the best value for money
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
Gilles brake lever FACTOR-X-LEVER
Gilles brake lever for various Aprilia, Ducati, Kawasaki, KTM and Triumph models. Optimal design for all brake styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER pro X-Bar Cross Bar X00 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart Type BC 102 Repair clutch lever silver With ABE, adjustable (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart clutch levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right brake lever, you are sure to find it in our Bikefinder. Note: Not for vehicles equipped with a radar warning system.
Lever set for Ducati models - Barracuda
The Barracuda levers impress with their perfect workmanship and delicate design. The levers are made of high-quality billet aluminum. They can be individually adjusted in 6 stages. There is a joint at the base of the lever to prevent damage or breakage even if it falls over. The levers are supplied exclusively in black anodized and in pairs. Alternatively, the lever end pieces can be reordered and exchanged in different anodized colors (see "Accessories"). The brake and clutch levers are supplied and have an ABE.
LSL konifizierter Lenker Cross Bar X00 28,6 mm schwarz
LSL konifizierter Lenker Cross Bar X00 28,6 mm schwarz LSL X-Bar Alu-Lenker Cross Bar X00, 1 1/8 Zoll, 28,60mm, Farbe Schwarz, Breite 805mm, Höhe 77mm, Tiefe 90mm, Wandstärke 4,5/4 mm, Klemmbereich 184mm, Griffrohrlänge 208mm Produktkennzeichnung: LSL Lenker Aluminium Produkt Typ: LSL X-Bar Alu-Lenker Cross Bar X00, 1 1/8 Zoll, sc
Navi mount kit T-Lock with smartphone Drybag for Aprilia RSV 4 Tuono 1100 (21-) - SW Motech-Copy
This all-round carefree package includes a waterproof Smartphone Drybag and various fastening elements. The T-Lock mount on the back of the Smartphone Drybag allows quick attachment to the Universal Navi Kit: With a quarter turn clockwise, the Smartphone Drybag is fixed to the clamping arm. The waterproof Smartphone Drybag with large viewing window and an internal dimension of 160 x 80 mm is suitable for almost all common smartphones up to a size of 6.5 inches. This universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Suitable for smartphones up to 6.5 inches Internal dimensions: 160 x 80 mm Waterproof roll closure Water repellent coating T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Aprilia RSV 4 Tuono 1100 (21-), KZ Details Total weight: approx. 0.5 kg Scope of delivery 1 x Smartphone Drybag 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x 2" clamp arm 1 x ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material
Shad pannier rack 3P for Ducati Diavel (13-18)
The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, in addition to the aesthetic aspects, the focus was above all on safety. Integrated design: The 3P fastening system optimally adapts to the contours of the vehicle. The typical rectangular frame has been reduced to a single arm that supports the three points (3P) used to attach the cases. Position: both the volume of the pannier and the angle of the 3P system have been designed to move the weight of the luggage as far as possible to the center of the motorcycle. This allows for greater safety and stability when riding with a full load. Aerodynamics: the use of 3 points gives stability and flexibility at the same time. This is achieved by a slight swing of the case. It therefore allows air to circulate easily around this case, avoiding the so-called angular effect of a typical flat and rigid case. Again, the better result is obtained in terms of safety and stability during the journey. Patented: The uniqueness and technical innovation of the 3P system have allowed SHAD to patent it. This makes SHAD the only manufacturer that can offer this fastening system.
Shad pannier rack 3P for Ducati Diavel (19-)
The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, in addition to the aesthetic aspects, the focus was above all on safety. Integrated design: The 3P fastening system optimally adapts to the contours of the vehicle. The typical rectangular frame has been reduced to a single arm that supports the three points (3P) used to attach the cases. Position: both the volume of the pannier and the angle of the 3P system have been designed to move the weight of the luggage as far as possible to the center of the motorcycle. This allows for greater safety and stability when riding with a full load. Aerodynamics: the use of 3 points gives stability and flexibility at the same time. This is achieved by a slight swing of the case. It therefore allows air to circulate easily around this case, avoiding the so-called angular effect of a typical flat and rigid case. Again, the better result is obtained in terms of safety and stability during the journey. Patented: The uniqueness and technical innovation of the 3P system have allowed SHAD to patent it. This makes SHAD the only manufacturer that can offer this fastening system.
SW-Motech Navi mount 1" ball kit for Ducati Diavel 1260 - SW Motech
The 1" ball kit allows navigation devices to be attached to handlebars with a diameter of 22, 28 mm or 1 inch by means of a mounting clamp. A clamping arm can be mounted on the ball adapter, which allows variable postioning of the navigation device. Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Diavel 1260 (20-22), 2G Details
SW-Motech Navi mount kit for GoPro camera for Ducati Diavel 1260 - SW Motech
And action! The GoPro HD HERO camera models combine robustness, versatility and an amazingly high image quality for the housing size. This makes the compact digital camera ideally suited for use on the motorcycle. SW-MOTECH supplies a versatile universal mount that comes as a complete set with a wide range of mounting options for the current generation of action cameras. Mounting options include a mirror thread mount and mounts with M6 or M8 ball as well as clamps for tube diameters of 22 and 28 mm and 1 inch. The swiveling RAM arm facilitates precise positioning of the camera to align the image section exactly to the rider's needs. SW-MOTECH universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Complete set for mounting a GoPro HD camera For GoPro HD HERO and GoPro HD Session Numerous mounting options Can be used on almost any motorcycle model Mounting clamps made of strong, fiberglass-reinforced plastic For mounting, for example, on handlebars, frames or crash bars with tube diameters of 22 mm, 28 mm or 1 inch Can also be mounted in the handlebar receptacle Can also be mounted directly on M6 or M8 threads Balls and 2 inch clamping arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Ducati Diavel 1260 (20-22), 2G Details