Multistrada 620 2005-2006 (A103, A104)
Available categories
Matching articles
ATHENA valve cover gasket
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability.Rocker arm cover gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauledSupplied without screw gaskets
C-Bow side carrier black for Ducati Multistrada 620 /1000 /1100/S Hepco & Becker
For Ducati Multistrada 620 (02-06) /1000 (03-06) /1100 /S (07-09) The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.0 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Electrosport regulator - Ducati
ElectroSport regulators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Electrosport Stator - Ducati
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Side case carrier fixed for Ducati Multistrada 620 /1000 /1100/S Hepco & Becker
For Ducati Multistrada 620 (02-06) /1000 (03-06) /1100 /S (07-09) The bolted side case carriers from Hepco & Becker are firmly attached to the motorcycle frame. Almost all touring side case systems from Hepco & Becker fit on this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. An additional lock adapter is required for this. This is normally supplied with the side cases. This lock adapter is bolted to the right and left of the carrier at the rear and holds the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco & Becker can usually be combined with Hepco & Becker rear carriers without any problems. Please observe the fitting instructions and the model-specific information. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Fits most Hepco & Becker hard-shell side cases (please note model-specific information on the respective carrier for any restrictions that may apply) Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product) Luggage systems generally do not require an ABE or registration Tube diameter: 16 mm Color: black Weight: 3.5 kg Scope of delivery: Right + left incl. mounting material and instructions.
Tecnium fork seal ring set with dust caps - 43x54x11 mm
Made in Japan Fork oil and dust seal kit For overhauling the fork seal Sold per pair
Tecnium fork seal ring set with dust caps - 43x54x11 mm
Made in Japan Fork oil and dust seal kit For overhauling the fork seal Sold per pair
Tecnium maintenance-free battery activated at the factory - BT12B-4
Factory-activated batteries have the same characteristics as maintenance-free batteries, but they have more power due to their radial design and additional plates. Features:VRLA technology (Valve Regulated Lead Acid)Factory activated, pre-charged, ready for immediate useLonger life cycle (3 times longer than a conventional battery)Easy installation (no risk of acid leakage)High performanceNo maintenanceNo danger (no separate transportation of acid)Can be mounted in various positions (vertical or horizontal)Sealed, no gas emissions and no risk of acid leakageRecommended for regions with low temperatures
Tecnium Racing sintered metal carbon brake pads - MCR206
These brake pads, designed exclusively for sports competitions, have been developed for extreme conditions and endurance competitions that require high heat resistance. Thanks to the exclusive transfer film technology (special grinding process that creates a film on the brake disk), this high-quality product offers high wear resistance.
Tecnium Street Performance sintered metal brake pads - MF171
Excellent compromise between performance and durability for performance-oriented use in the sports sector (high coefficient of friction at the front). In conjunction with MR brake pads (medium coefficient of friction) at the rear, they offer optimum brake balance.
Tecnium Street Performance sintered metal brake pads - MF206
Excellent compromise between performance and durability for performance-oriented use in the sports sector (high coefficient of friction at the front). In conjunction with MR brake pads (medium coefficient of friction) at the rear, they offer optimum brake balance.
Tecnium Street Performance sintered metal brake pads - MR230
Excellent compromise between performance and durability for performance-oriented use in the sports sector. MR brake pads have a medium coefficient of friction, which is ideal for the rear axle, and offer an optimum braking balance in conjunction with MF brake pads (high coefficient of friction) at the front.
Tubular luggage rack Topcase carrier black for Ducati Multistrada 620 /1000 /1100/S Hepco & Becker
For Ducati Multistrada 620 (02-06) /1000 (03-06) /1100 /S (07-09) Proven tubular luggage racks Topcase carriers for Hepco&Becker top cases of the highest quality. Hepco&Becker luggage racks are specially designed for almost all Hepco&Becker top cases. But not only new top cases fit. Older Hepco&Becker models can also be fitted. Not suitable for: Topcase "Orbit" and topcases with universal plate. The basic mount has not changed. The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to their construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems. The tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Features: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock Recommended load: 5 kg (please observe the model-specific information on the respective carrier and the motorcycle manufacturer-specific information) Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions) Incl. mounting material and instructions MADE IN GERMANY Luggage racks generally do not require an ABE or registration Scope of delivery: Luggage rack + mounting material + instructions Color: black Weight: 2.0 kg