CB 500 X 2013-2015 (PC46)
Available categories
Matching articles
Alurack anthracite for Honda CB 500 X (13-16) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 3.6 kg Color: anthracite Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Standard aluminum side cases cannot be combined with top case Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
BMC Sport air filter for Honda CBR 500 R / CB 500 X (13-18)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
C-Bow bag holder anthracite for Honda CB 500 X (13-16) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.4 kg Color: anthracite Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash pads for Honda CB 500 F / CB 500 X - Barracuda
The Barracuda crash pads are specially manufactured for the respective motorcycle models and can be mounted on the motorcycle without additional modification. The scope of delivery includes the right and left crash pad and a vehicle-specific screw set. The plastic pad with anodized aluminum spacers is resistant and durable. For visual enhancement, colored inserts are available (see accessories), with which you can individualize your crash pads and color-match them to your motorcycle.
Cross-Pro Trail crash bar
Aluminum crash bar Reduced weight Maximum durability Innovative design Maximum protection for your motorcycle High quality aluminum, with 25mm diameter and 3mm thickness
Easyrack anthracite for Honda CB 500 X (13-16) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 3.7 kg Color: anthracite Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Standard aluminum side case cannot be combined with top case Bracket / substructure in anthracite, Easyrack in black Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Electrosport controller
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Engine guard anthracite for Honda CB 500 X (13-16) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.5 kg Color: anthracite Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Fitting instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Front guard for Honda CB 500 X (13-16) Hepco & Becker
For selected motorcycle models frequently used in driving schools, from 125cc to 750cc, we offer special front and rear guards that can be combined with our engine guards. Good protection in case of overturns and falls at low speed Turn signals, clutch and brake levers, mufflers, fairing parts etc. are effectively protected High quality powder coating Incl. mounting material
Givi Topcaseträger for Honda CB 500 X (13-)
Specific topcase carrier for MONOKEY or MONOLOCK cases / to be mounted with the MONOKEY plate M5, M7, M8A, M8B, M9A and M9B or the MONOLOCK plate M5M and M6M or the anodized aluminum luggage carrier EX2M (not included) / with M8A, M8B, M9A and M9B it is not possible to mount the brake lights and/or the remote control / not compatible with the original side carrier An overview of our cases can be found below in the accessories. Maximum load for MONOKEY case 10 kg (for M8A, M8B, M9A and M9B plate 6 kg load), for MONOLOCK case 3 kg. Important note: The carrier is supplied without accessories (side case carrier, case, plate ...)! Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
HiFlo air filter element for Honda CBR 500 R / CB 500 X (13-18)
HIFLO air filters are produced from the highest quality materials to give modern high performance engines the best performance: Maximum filtration and perfect airflow !
HIGHSIDER pro handlebar mirror Conero Black (1pc)
HIGHSIDER CONERO mirror, E-approved, in 2 versions.- BLACK EDITION - The all-black edition for those who like to see in black.- Black anodized version with silver accents -Elegant, CNC-milled universal mirror with a round head made of anodized aluminium in black or matt black. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. The slightly tinted and curved mirror glass offers optimum glare protection. Can be used for left and right side.Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. This is prudence in perfection.A/B Ø head: 98 mmC Total width: 170 mmD Total height: 175 mmStem length: 159 mm to the joint, then another 27 mm to the threaded boltScope of delivery: 1 piece incl.1 x M10 x 1.25 mm right-hand thread adapter1 x M10 x 1.5 mm right-hand thread adapter1 x M10 x 1.25 mm left-hand thread adapterFurther accessories from the HIGHSIDER CONERO seriesYour bike - your project: Design your naked bike with our HIGHSIDER CONERO products to create an individual highlight - expressive, rich in contrast and perfect in form!
HIGHSIDER pro handlebar mirror Conero Black Edition Black (1pc)
HIGHSIDER CONERO mirror, E-approved, in 2 versions. - BLACK EDITION - The all-black edition for those who like to see in black. - Black anodized version - Elegant, CNC-milled universal mirror with a round head made of anodized aluminium in black or matt black. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. The slightly tinted and curved mirror glass offers optimum glare protection. Can be used for left and right side. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Character and overview - whether retro or modern. The HIGHSIDER mirror series is characterized by its distinctive design and aerodynamic function. This is prudence in perfection. A/B Ø head: 98 mm C Total width: 170 mm D Overall height: 175 mm Stem length: 159 mm to the joint, then another 27 mm to the threaded bolt Scope of delivery: 1 piece incl. 1 x M10 x 1.25 mm right-hand thread adapter 1 x M10 x 1.5 mm right-hand thread adapter 1 x M10 x 1.25 mm left-hand thread adapter Further accessories from the HIGHSIDER CONERO series Your bike - your project: Make your naked bike an individual highlight with our HIGHSIDER CONERO products - expressive, rich in contrast and perfect in form!
HIGHSIDER pro handlebar mirror Esagano-RS black/black (pair)
HIGHSIDER ESAGANO-RS mirrors, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The cranked shape and size of the aluminum stem allows the mirror head to be positioned at a wide angle, providing a particularly good view. At the same time, thanks to its design, it offers sufficient space between the handle area and the mirror stem. Dimensions: A Head width: 117 mm B Height of head: 92 mm C Total width: 241 mm D Overall height: 159 mm Width across flats RH/LH adapter: 16 mm Scope of delivery: 1 pair of mirrors, incl. 2 x M10 x 1.25 mm right-hand thread adapters 1 x adapter M10 x 1.25 mm left-hand thread
HIGHSIDER pro handlebar mirror Esagano-RS black/silver (pair)
HIGHSIDER ESAGANO-RS mirrors, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The aluminum stem, with its cranked shape and size, allows the mirror head to be extended far enough to provide a particularly good view. At the same time, thanks to its design, it offers sufficient space between the handle area and the mirror stem. Dimensions: A Head width: 117 mm B Height of head: 92 mm C Total width: 241 mm D Overall height: 159 mm Width across flats RH/LH adapter: 16 mm Scope of delivery: 1 pair of mirrors, incl. 2 x M10 x 1.25 mm right-hand thread adapters 1 x adapter M10 x 1.25 mm left-hand thread
HIGHSIDER pro handlebar mirror Montana-Blast Black (1pc)
HIGHSIDER MONTANA-BLAST XL mirror, E-approved The HIGHSIDER MONTANA-BLAST XL handlebar mirror impresses with its timeless and classic design with a finely bead-blasted surface finish to match the stem. The mirror head is paired with a 25 mm longer mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the rider a better view to the rear and increases ergonomics when riding. Dimensions: A/B Ø head: 102 mm C Overall width: 165 mm D Overall height: 185 mm Scope of delivery: 1 piece - 1x M10x1.25 right-hand thread adapter - 1x M10x1.25 left-hand thread adapter
HIGHSIDER pro handlebar mirror Montana-XL Black (1pc)
HIGHSIDER MONTANA-XL mirror, E-approved The HIGHSIDER MONTANA XL handlebar mirror impresses with its timeless and classic design with a black anodized surface finish to match the stem. The mirror head is paired with a 25mm longer mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the rider a better view to the rear and increases ergonomics when riding. Dimensions: A/B Ø head: 102 mm C Overall width: 165 mm D Overall height: 185 mm Scope of delivery: 1 piece 1x M10x 1.25 right-hand thread adapter 1x M10x 1.25 left-hand thread adapter
HIGHSIDER pro Handlebar Mirror Victory-Blast XL Black (1pc)
HIGHSIDER VICTORY-BLAST XL mirror, E-approved The HIGHSIDER VICTORY-BLAST XL handlebar mirror impresses with its timeless and classic design with a finely bead-blasted surface finish to match the stem. The mirror head is paired with a 25 mm longer mirror arm with new design accents incorporated into the mirror arm. The extended mirror arm thus offers the rider a better view to the rear and increases ergonomics when riding. Dimensions: A Head width: 117 mm B Height head: 83 mm C Overall width: 197 mm D Overall height: 176 mm Scope of delivery: 1 piece 1x M10x1.25 right-hand thread adapter 1x M10x1.25 left-hand thread adapter