CBR 1000 RR Fireblade 2004-2005 (SC57)
Available categories
Matching articles
ARROW Auspuff RACE-TECH für Honda CBR1000RR Fireblade 2004-2007,Titan
ARROW Auspuff RACE-TECH für Honda CBR1000RR Fireblade 2004-2007,Titan ARROW RACE-TECH Endschalldämpfer mit Titan-Hülle rhombisch und Carbon-Endkappe, mit herausnehmbarem dB-Killer Einsatz, mit Straßenzulassung. Für Honda CBR1000RR Fireblade, Typ SC57, Modelljahr 2004-2007 Kann nur in Verbindung mit ARROW Zwischenrohr Art. Nr. AR-71335MI verbaut werden. Produktkennzeichnung: Abgastechnik ARROW Hinweis: nur in Verbindung mit ARROW Zwischenrohr AR-71335MI (extra bestellen!) zum Anbau an Original-Krümmer oder in Verbindung mit ARROW-Krümmer AR-71336MI Produkt Typ: ARROW Race-Tech CBR1000RR SC57 04-07 Titan
ATHENA valve cover gasket
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability.Rocker arm cover gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauledSupplied without screw gaskets
Barracuda Kennzeichenhalter für Honda CBR600RR 2003-2006 und CBR1000RR Fireblade 2004-2007
Barracuda Kennzeichenhalter für Honda CBR600RR 2003-2006 und CBR1000RR Fireblade 2004-2007 Barracuda Kennzeichenhalter für Honda CBR1000RR Fireblade, Modelljahr 2004 - 2007 und für Honda CBR 600RR, Modelljahr 2003 - 2006 ; Aluminium schwarz eloxiert, zur Verwendung mit Zubehörblinkern, Lieferung ohne Kennzeichenbeleuchtung und Reflektor WICHTIG: Der BARRACUDA Kennzeichenhalter-Kit ist mit dem Original-Auspuff kompatibel. Die mögliche Verwendung eines Aftermarket-Auspuffs kann Änderungen / Anpassung bei der Montage erfordern. Produktkennzeichnung: Barracuda Kennzeichenhalter Produkt Typ: Kennzeichenhalter Honda CBR600RR
Blinker, front right / rear left
Dimensions and properties identical to standard component.
BMC Sportluftfilter für Honda CBR1000RR 2004-2007
BMC Sportluftfilter für Honda CBR1000RR 2004-2007 BMC Sportluftfilter für Honda CBR1000RR Typ: SC57 (Modelljahr 2004-2007) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda CBR1000RR
Electrosport regulator ESR439 Honda CBR 600 RR, 07-10, CBR 1000
Regulator ESR 439 - Block connector B 2-fold, 1 x green, 1 x redSuitable for HONDA CBR600RR (07-12)CBR600RA (09-11)CBR1000RR (04-05)CBR1000RR (06-07)- technically modified regulators are excluded from exchange!ATTENTION: This regulator is not suitable for a lithium-ion battery! The battery or other electronic components may be damaged!Suitable for the following battery types:Lead/acid, lead/acid MF, AGM, pure lead or gel
Electrosport Stator - Honda CBR1000RR Fireblade
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Front left/rear right blinker
Dimensions and properties identical to standard component.
Front left/rear right blinker
Dimensions and properties identical to standard component. For vehicles that are not equipped with LEDs as standard, please connect the resistor between the relay and blinker,323099 so that the correct output is achieved
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-X LED rear light black/red E-approved (1pc)
HIGHSIDER AKRON-X LED rear light with red glass, E-approved - State-of-the-art technology in a timelessly elegant look - The timeless but striking design language characterizes the design of the HIGHSIDER AKRON-X rear light. The bead-blasted aluminium housing impresses with its black matt anodization. You can adjust the rear light via the adjustable stem in a range of up to 37° and therefore position it perfectly on your bike. Powerful SMD technology under the dark red glass ensures powerful illumination so that you cannot be overlooked. Be seen with safety - the AKRON-X rear light offers you the safety you need on your bike and the look you want. Our accessory TIP: Visually matching in combination with the products of the AKRON series. The rear light picks up on the design language of the handlebar ends, grips and indicators with its design elements and turns your bike into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. You can customize your bike with the highest level of quality and functionality. Dimensions: A Diameter: 39 mm B Width: 45 mm C Depth: 47 mm Connections: Black cable = ground (-) White cable = rear light (+) Red cable = brake light (+) Scope of delivery: 1 piece, including mounting and connection material
HIGHSIDER pro Apollo Bullet LED rear light, brake light, blinker black/toned 3in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 3in1 LED rear light, brake light, blinker, for rear E-approved. LED rear light, brake light, blinker unit in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Saving the best for last - be seen in safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster Dimensions:A: 22 mmB :34 mmD: 40 mmThreaded bolt: M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+) Scope of delivery: 1 pair
HIGHSIDER Pro Apollo Bullet LED turn signal housing black / lens smoke gray (pair), front & rear
HIGHSIDER APOLLO BULLET LED indicators, for front and rear E-approved. Power LED blinker in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best. Dimensions:A: 22 mmB: 34 mmD: 40 mm Threaded bolt M8 x 17 mm Connections:Black cable = ground (-)Yellow cable = blinker (+) Scope of delivery: 1 pair Note: E-approved for front and rear. Can be ordered as an option:HIGHSIDER Rear light/indicator APOLLO BULLET, article no. 254-171HIGHSIDER Indicator/position light APOLLO BULLET, article no. 204-173
HIGHSIDER pro Apollo Bullet LED turn signal/position light black/tinted 2in1, E-approved (pair)
HIGHSIDER APOLLO BULLET 2in1 LED indicator/position light, for front E-approvedLED indicator/position light in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Installation location: FrontDimensions:A: 22 mmB: 34 mmD: 40 mmThreaded bolt M8 x 17 mmConnections:Black cable = ground (-)Yellow cable = blinker (+)White cable = parking light (+)Scope of delivery: 1 pair
HIGHSIDER Pro Apollo Classic LED Indicator Housing Black / Lens Smoke Gray (Pair), Front & Rear
HIGHSIDER APOLLO CLASSIC LED indicatorsPower LED indicators in a black aluminum housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations.With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs.In the right direction - with the innovative blinker series from HIGHSIDER. Show not only where you want to go, but also who you are. This is trend-setting design at its best.Dimensions A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded boltConnections:Black cable = ground (-)Yellow cable = blinker (+)Scope of delivery: 1 pairOther accessories from the CLASSIC seriesYour bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic round shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.
HIGHSIDER pro Apollo Classic LED rear light, brake light, blinker black/tinted 3in1, E-approved (pair)
HIGHSIDER APOLLO CLASSIC LED rear light, brake light, blinkerWith tinted glass and aluminum housing in chrome or black, E-approved for rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the past. The slim, round shapes support the classic associations. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the center. The outer ring, on the other hand, consists of COBs (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. This also enables higher light values to be achieved than with conventional LEDs. Be seen with safety - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sports bike or speedster. Dimensions: A Diameter: 22 mm B Width: 39 mmC Depth: 21.5 mm Stem length: 16 mm Threaded bolt: M8 x 1.25 Connections: Black cable = earth (-)Yellow cable = rear light (+)Red cable = brake light (+)Blue cable = blinker (+)Scope of delivery: 1 pair