CTX 700 N 2014-2016 (RC68)
Available categories
Matching articles
Alurack top case carrier black for Honda CTX 700 /N /DCT (14-17) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 4.0 kg Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
BMC Sportluftfilter für Honda CTX 700 2014-2016; NC 700 2012-; NC 750 2014-; NJ NM4 70 Vultus 2015-2
BMC Sportluftfilter für Honda CTX 700 2014-2016; NC 700 2012-; NC 750 2014-; NJ NM4 70 Vultus 2015-2017 BMC Sportluftfilter für Honda CTX 700 A/D/N/NA/ND (Modelljahr 2014-2016) NC 700 Integra/S/SA/SD/XAC/XC/XDC (Modelljahr 2012-2014) NC 750 Integra/SA/SD/XA/XD (Modelljahr 2014-) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda CTX/NC 700/750
C-Bow side carrier black for Honda CTX 700 /N /DCT (14-17) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 4.0 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Easyrack top case carrier for Honda CTX 700 /N /DCT (14-17) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 4.1 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Engine guard black for Honda CTX 700 /N /DCT (14-17) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.7 kg Color: black Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Gas cap decor with HRC logo original for all Honda models
- Carbon look- HRC logo
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
HIGHSIDER smart handlebar weights black For various Honda OEM style (pair)
HIGHSIDER smart handlebar weight made of aluminum. Suitable for various Honda original handlebars. Dimensions:Diameter: 31 mmLength: 22 mmThread: M6 x 1.25 mmScope of delivery: 1 pair
Kit for mounting the Smart Bar S900A / Smart Mount S901A Givi
Specific kit for mounting the Smart Bar S900A or the Smart Mount S901A (both sold separately).The S901A is compatible with the SGZ39SM mount (for Garmin Zumo 345LM/390LM/590LM/595LM) and STTR40SM (for Tom Tom Rider 40/400/410/42/420/450).Important note: The kit is supplied without accessories!Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Main stand black for Honda CTX 700 /N /DCT (14-17) Hepco & Becker
Stable in all positions. Perfect for changing bikes or winterizing by relieving the suspension fork. Stable. Easy to operate. The main stands from Hepco & Becker generally do not restrict the freedom of lean angle when riding and are extremely robust. Thanks to the sophisticated geometry and non-slip tread surface, it is very easy to park the motorcycle safely in any situation. The precisely manufactured stands are very stable, sandblasted, primed and powder-coated in black and therefore weatherproof and of lasting value. Main stands simplify maintenance work and ensure a secure stand, e.g. when refueling. They take the strain off the suspension elements and the rear wheel during winter storage. Details: ABE is supplied Usually no restriction of the lean angle clearance Sandblasted, finished with high-quality powder coating Incl. mounting material + instructions Please note the installation instructions provided here ABE download: https://hepco-becker.bike/de/homepage-de/service/abe Helpful tool for attaching the tension spring: Item number: 710134 Color: black Weight: 3.0 kg
OptiMATE 3 battery charger and maintenance unit for all Honda models
- For 12 V lead-acid and maintenance-free GEL batteries from2.5 to 50 Ah nominal capacity.
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
Original Honda CTX700N 12 V socket
! Must be combined with additional cable 08A70-MJF-A00 (17,- €)
Original Honda CTX700N backrest
! Must be combined with mounting kit for luggage 08L72-MJF-A00 (83,- €) and holder for luggage bridge 08R71-MJF-A00ZP (124,- €)
Original Honda CTX700N backrest bag 1.7 liters
! Must be combined with mounting kit for luggage (08L72-MJF-A00) (83,- €)
Original Honda CTX700N DCT foot shift lever
- Simulates conventional gearshift feel- can be used in conjunction with or instead of the manual gearshift
Original Honda CTX700N High windshield
- 205 mm higher than the standard disc- only for vehicles with front fairing
Original Honda CTX700N luggage rack
! Must be combined with mounting kit for luggage 08L72-MJF-A00 (83,- €) and holder for luggage bridge 08R71-MJF-A00ZP (124,- €)