GB 350 S (2025-)
Available categories
Matching articles
C-Bow bag holder black for Honda GB 350 S (25-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.0 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Fits with Honda pillion cover. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Engine guard black for Honda GB 350 S (2025-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad. Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Grip ends for Honda GB 350 S (25-) Original
Discover the grip ends for Honda GB 350 S (25-) Original - a perfect combination of stylish design and optimum protection. Made from high-quality, milled aluminum, they offer extreme robustness and corrosion resistance. Please note that mounting with grip heating or hand protectors is not possible.
Grip heating for Honda GB 350 S (25-) Original
Discover the heated grips for the Honda GB 350 S (25-) Original! With a switch integrated in the grip, you can conveniently control the grips. Enjoy comfort in cold weather with 5 heating levels that always give you the perfect warmth. The heated grips have the same thickness as standard grips, making them comfortable to use. Thanks to the practical memory function, your preferred setting is saved.
Hand protectors for Honda GB 350 S (25-) Original
Improve your riding comfort with the hand protectors for the Honda GB 350 S. These high-quality protectors minimize the airflow on your hands so that you can ride relaxed even in windy conditions. The set is supplied complete and is easy to fit. Please note that the hand protectors cannot be fitted together with the grip ends and the grip heater. Protect your hands and enjoy every ride!
Headlight fairing for Honda GB 350 S (25-) Original
Experience more riding comfort with the headlight fairing for Honda GB 350 S (25-) Original. This high-quality fairing effectively deflects the airstream and thus ensures a more pleasant riding experience. It is also weather-resistant, so you can ride safely in any weather.
Headlight fairing for Honda GB 350 S (25-) Original
Discover the headlight fairing for Honda GB 350 S (25-) Original! This high-quality fairing not only provides effective wind protection, but also stylishly complements the design of your machine. Ideal for anyone who values functionality and aesthetics. Get the perfect protection for your bike now!
High windshield for Honda GB 350 S (25-) Original
Discover the high windshield for the Honda GB 350 S (25-) Original! This high-quality windshield reduces the strain on your upper body and ensures a pleasant riding experience. It reliably protects you from wind and rain, so that you can ride carefree even in bad weather. Please note that it cannot be fitted with the headlight fairing.
LED fog light for Honda GB 350 S (25-) Original
Discover the LED fog light for Honda GB 350 S (25-) Original! This powerful headlight increases your visibility in poor light conditions and ensures optimum safety with its high brightness. Thanks to its low energy consumption, it also saves your battery. Please note that the engine cover bracket is required for installation. Upgrade your motorcycle now and ride more safely in the dark!
Passenger seat cover for Honda GB 350 S (25-) Original
This stylish cover gives your motorcycle the look of a classic single-seater while providing robust protection. Made from high-quality polycarbonate, it is durable and resistant. Please note that the cover cannot be fitted at the same time as saddlebags or a rear bag.
Saddlebag bracket left for Honda GB 350 S (25-) Original
This practical three-point adapter ensures secure and stable attachment of your saddlebags. With its high-quality workmanship and custom-fit design, it is the ideal solution for your motorcycle look. Easy to fit and perfectly matched to your bike.
Saddlebag left (incl. holder) for Honda GB 350 S (25-) Original
Discover the saddlebag left (incl. holder) for Honda GB 350 S (25-), your perfect companion for every adventure! Made from robust and lightweight nylon, it is not only durable but also lightweight. The practical three-point adapter enables quick attachment and removal with just one hand movement. The waterproof inner pocket reliably protects your valuables from getting wet. In addition, the handle and shoulder strap ensure maximum comfort during transportation.
Side tank protectors for Honda GB 350 S (25-) Original
These specially developed protectors are perfectly matched to the shape of the tank and not only offer optimum grip, but also protect your tank from scratches and damage. Enjoy improved riding control and a safe riding experience in every bend.
SW-Motech Drybag 350 rear bag for Honda GB 350 S (25-), black / gray - SW Motech
The Drybag 350 can be attached to your motorcycle in a few simple steps and offers plenty of space for your travel essentials. The rear bag is available in grey and yellow and can be combined with both larger and smaller models from the Drybag series. The zippered compartment on the side gives you quick access to personal items, while a practical carrying handle makes it easy to transport the bag away from the road. Available in six sizes, our drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the load. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Welded outer pocket MOLLE adaptation for attaching additional bags Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture Additional loop straps allow the bags to be pulled closer to the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road Scope of delivery 1 x Drybag 350 rear bag 4 x loop straps 1 x paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: yellow / grey Dimensions: 58.0 x 28.0 x 28.0 cm Total weight: approx. 1.2 kg Total volume: 35.0 l Please note Not compatible with the old Drybag versions. Outer pockets are splash-proof and not completely waterproof. Shoulder strap sold separately.
SW-Motech Drybag 700 rear bag for Honda GB 350 S (25-), black / gray - SW Motech
The weatherproof solution for travelers with a lot of luggage: the Drybag 700 reliably protects up to 70 liters of luggage from moisture and dirt. By combining it with smaller drybags, your luggage volume can be expanded as required; it is attached using clips on the top of the bag. The Drybag 700 has two separate outer pockets for stowing small items and two MOLLE attachments to which you can attach additional pockets. The width can be easily extended using the central zipper and therefore fits both small and large motorcycles perfectly. Available in six sizes, our drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the payload. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Two welded outer pockets Two MOLLE adaptations for attaching additional bags Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture Additional loop straps allow the bags to be pulled closer to the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road Scope of delivery 1 x Drybag 700 rear bag 4 x loop straps 1 x paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 76.0 x 75.0 x 30.0 cm Total weight: approx. 1.9 kg Total volume: 70.0 l Please note Not compatible with the old Drybag versions. Outer pockets are splash-proof and not completely waterproof. Shoulder strap sold separately.
SW-Motech Drybag 80 rear bag for Honda GB 350 S (25-), black / gray - SW Motech
The small Drybag 80 is the ultimate companion for your motorcycle adventure. It can be attached to the crash bar, the pillion seat or the luggage rack, where it reliably fulfills its purpose as a practical storage space for all areas of use. Alternatively, you can also lash the Drybag 80 onto larger models (from Drybag 350 upwards) or simply use it as a shoulder bag. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the load. The drybags are completely waterproof and highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Welded outer pocket Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture D-rings allow the bag to be pulled tightly onto the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road For attachment to crash bars or on the pillion seat Scope of delivery 1 x Drybag 80 tail bag 2 x loop straps 1 x Paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 19.0 x 9.0 x 35.0 cm Total weight: approx. 0.6 kg Total volume: 8.0 l Notes Shoulder strap available separately.
SW-Motech ION M motorcycle tail bag Honda GB 350 S (25-)
The ION M rear bag can be attached to almost any motorcycle rear thanks to its optimized fit and the curved, non-slip base. Particularly practical: the rear bag has two outer pockets and a mesh compartment inside the lid. The storage space of 26 liters, which is easily accessible via the large lid, can be increased to 36 liters if required by means of two side extensions. The stiffened sides prevent the bag from flapping - even during sporty riding. An integrated carrying handle and the shoulder strap supplied also make the ION M rear bag a comfortable travel bag. Tail bags from the ION series - available in S, M and L versionsThree sizes, elegant look, attractive price: the rear bags in the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made from black 600D polyester with soft vinyl elements, the rear bags combine an attractive design with features suitable for touring, such as optimized storage space, anti-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for the pillion seat or rear of many models Volume expansion from 26 to 36 l via two side zippers, width varies from 44 to 54 cm 4 D-rings for attaching the shoulder strap or other items of luggage No flapping thanks to stiffened sides Easily accessible: 2 outer pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carry handle Non-slip underside for optimum grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for greater safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver-grey Durable, particularly UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included in the scope of delivery Scope of delivery 1 x ION M rear bag 1 x waterproof inner bag 4 x long loop straps (67 cm) 4 x short loop straps (17 cm) 2 x straps for attachment to the license plate holder 1 x shoulder strap 1 x paint protection film Details Material: 600D polyester / soft vinyl Color: black / black Dimensions: 30.0 x 44.0 x 30.0 cm Total weight: approx. 1.5 kg Total volume: 26.0-36.0 l
SW-Motech ION S motorcycle tail bag Honda GB 350 S (25-)
Ideal for small and sporty bikes: The volume of the ION S rear bag can be expanded from 7 to 15 l via a zipper and thus offers sufficient storage space for a drink, change of clothes, safety vest and other small items needed for a day trip or short ride. The compact bag can be lashed to riveted D-rings with the included loop straps. In addition, two Velcro straps and an insert on the underside allow quick and secure attachment to the seat or luggage rack. The stiffened sides, the padded lid and straps for tightening the volume extension guarantee a firm shape even when riding in a sporty manner. Items that can be stowed in the outer pocket or in the mesh compartment inside the lid are particularly quick to hand. A carrying handle also makes the ION rear bag a practical travel companion off the road. Tail bags from the ION series - available in S, M and L versionsThree sizes, elegant look, attractive price: the rear bags in the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made from black 600D polyester with soft vinyl elements, the rear bags combine an attractive design with features suitable for touring, such as optimized storage space, anti-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Compact rear bag, ideal for small and sporty bikes Volume expansion from 7 to 15 l, height varies between 10 and 18 cm D-rings for reliable 4-point attachment with loop straps Two integrated Velcro straps plus insert for fastening under the seat or luggage rack Easily accessible: outer pocket and mesh compartment inside the lid Large main compartment for individual loading Practical carrying handle Non-slip underside for optimum grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for greater safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver-grey Durable, particularly UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included in the scope of delivery Scope of delivery 1 x ION S rear bag 1 x waterproof inner bag 1 x strap set for rear bag (20 mm wide, 2x 37 cm long, 2x 70 cm long) 1 x paint protection film Details Material: 600D polyester / soft vinyl Color: black / black Dimensions: 33.0 x 29.0 x 10.0 cm Total weight: approx. 0.6 kg Total volume: 7.0-15.0 l
SW-Motech Mirror extension black, max. installation 40 mm for Honda GB 350 S (25-) - SW Motech
So that not only your own shoulders are visible in the rear-view mirror: The extension elements ensure a significantly improved field of vision by moving the mirrors outwards. Once adjusted and screwed in place, the robust and attractive extensions hold the mirrors securely in place, even at high speeds and off-road. An ABE is available for many motorcycle models. Up to 4 cm height gain, up to 4 cm lateral offset To improve visibility to the rear Simple installation on the mirror thread
SW-Motech Mirror set Sport long for Honda GB 350 S (25-) - SW Motech
This Sport mirror set has a long mirror arm. You can install it on motorcycles with mirror mounts with M10x1.25 right / left thread. SW-MOTECH manufactures the adjustable mirrors in a modern and flat design from black anodized aluminium. The mirror arms consist of infinitely adjustable elements and can each be extended by 30 millimetres. The various mirror adjustment options give the rider greater safety thanks to a better overview of their surroundings. With long mirror arm For mirror mounts with M10x1.25 right / left thread Mirror arm length: 182 mm Modern and flat edge design Milled sections and functional surfaces 4 different adjustment options for the best possible alignment of the field of vision Stepless rotation and inclination of the mirror arm Length of the mirror arm infinitely adjustable in the range of 30 mm Mounting on existing mirror connection with suitable mounting material Mirrors have an ECE approval mark Scope of delivery 1 x Sport mirror set 1 x mounting material for mirror set Fitting instructions Mounting material Mirror details Material: aluminum Color: black Total weight: approx. 0.9 kg