NSS 125 Forza 2021-2024 (JK02)
Available categories
Matching articles
ARROW exhaust DARK URBAN for Honda Forza 125 (15-)
ARROW DARK URBAN rear muffler with black aluminum shell and black stainless steel end cap, with dB-Killer insert, street legal,For HondaForza 125, type JF 60, model year 2015-16Forza 125, type JF 69, model year 2018-Can only be used with ARROW manifold AR-53056. Inspired by the Reflex 2.0 series, the Urban mufflers create a short exhaust for maxi scooters with a design similar to the famous Arrow Race-Tech exhaust systems (diamond shape).The Urban systems feature a new type of noise attenuation system, the mounts are welded to the muffler shell, eliminating the need for an adapter plate. Arrow says the exhaust has a lighter weight compared to original systems.Features:- New type of noise reduction system- Welded brackets- Weight reduction
ARROW manifold with catalytic converter for Honda Forza 125 (15-)
ARROW manifold (with catalyst), stainless steel, street legal.For HondaForza 125, type JF60, model year 2015-16Forza 125, type JF69, model year 2018-Only in combination with ARROW rear muffler AR-53508 Passion for good sound and a wide variety of models - that's what Arrow stands for. With a lot of know-how through years of data collection and cooperation with racers from MotoGP, WSBK and other classes, the Arrow exhaust systems are constantly developed and optimized with the progress of technologies and leaned on current trends.Collectors and pipes are the key to optimal exhaust routing and planned power delivery. CNC milled components and welds that do not reduce the inner diameter contribute significantly to this. Thus, the diameter of the pipes, bending radii, welds and their exact placement and execution, as well as the guidance of the manifold pipes, are optimally adapted to each bike. Depending on the engine and ignition sequence, the optimal layout of the manifold, the connecting pieces and the intermediate pipes up to the rear mufflers is worked out in countless test bench runs.The Arrow manifolds are made of a special steel alloy (racing variants also made of high-quality, lightweight titanium). The V2A steel is highly temperature resistant and can be mechanically deformed very well. It has a high resistance to humidity, water and weak alkalis, such as those used in motorcycle care products. Due to its lower weight, the titanium manifold variant is used in racing.For legal operation, a version with an integrated catalytic converter is also available for many motorcycles. Retrofit catalytic converters are also in the range for exhaust gas purification.Features:- Made of stainless steel or titanium (0.8 mm wall thickness)- Flow-optimized- Optimum power delivery in conjunction with different rear silencer variants- Available for numerous models
ATHENA set of variator rollers 20x15mm 14.5gr - 6 pieces
High-quality ATHENA roller kit as an OE replacement or to increase performanceAthena rollers are the ideal replacement for the original product and offer the option of varying the transmission ratio of your scooter, allowing you to achieve maximum speed and acceleration perfectly. Thanks to the variety of weights and sizes, you will find the perfect solution for a specific gearbox calibration.
BANDO Premium drive belts
BANDO is an original equipment manufacturer for numerous two-wheeler manufacturers and has been setting standards in the production of drive belts for 75 years.PIAGGIO, YAMAHA, MALOSSI ...trust this recognized supplier. High-quality drive belt in series design with outstanding technical properties for high mileageVery high thermal resistanceFor excellent power transmission
BMC Luftfilter für Honda Forza 125 Modelljahr 2020-
BMC Luftfilter für Honda Forza 125 Modelljahr 2020- BMC Luftfilter für Honda Forza 125, ab Modelljahr 2020- Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Luftfilter für Honda Forza 125
BMC Sport air filter for Honda Forza 125 (20-)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
ERMAX Sportivo windshield for Vespa GTS/GTS Super/GT/GT L (-'22), tinted
H 305 mm W 525 mm tinted incl. mounting material (black) with ABE
Footboard cover for Honda Forza 125 / 350 (2021-) original Honda
The running board cover for the Honda Forza 350 is an original Honda product and fits your scooter perfectly. The set is made of high-quality stainless steel and is equipped with integrated anti-slip rubber strips. This not only ensures an elegant look, but also additional safety when getting on and off the scooter. The cladding also protects the original running boards from scratches and damage. Fitting the running board cover is extremely easy and can be done by yourself without any great effort. The set includes all the necessary parts and detailed instructions (QR code). With the original footboard cover for the Honda Forza 350, you will be an eye-catcher on the road. Give your scooter that little bit extra and enhance its elegant side. Simple installation made from high-quality stainless steel Original Honda accessories
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro bar end mirror Esagano-RS black/black long (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, long, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. The handlebar end mirror can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Overall height: 169 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/black short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Total height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/silver short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Overall height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro Curve-Blast handlebar weights black (pair)
HIGHSIDER CURVE-BLAST handlebar weights - Finely bead-blasted surface in black satin finish - Handlebar weights made of black aluminum with black coated central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions Handlebar weight: Diameter: 35.5 mm Width: 17 mm Mount for mirror: Diameter: 29.8 mm Width: 12 mm Weight with attachments: 74 g Thread M6 x 1.25 mm Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 1 pair, contains: 2 x handlebar weights each. 2 x clamping sleeves D. 12 mm and D. 16 mm each. 2 x centering sleeves each type 1, type 2, type 3. 2 x each black-coated M6 central bolt, toothed washer and M6 conical nut
HIGHSIDER pro Dot handlebar weights black (pair)
HIGHSIDER handlebar weights DOT, chrome-plated or blackHandlebar weights made of chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weight: Diameter: 35.5 mmWidth: 17 mmMirror mount:Diameter: 29.8 mmWidth: 12 mmWeight with mounting parts: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair: 2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves type 1, type 2, type 3 each.2 x central bolt M6, lock washer and cone nut M6 each.Note:Spare mounting kit: 161-034
HIGHSIDER pro Dot-Blast handlebar weights black (pair)
HIGHSIDER DOT-BLAST handlebar weights- surface finely bead-blasted in black satin finish -Handlebar weights made of black aluminum with black-coated central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.DimensionsHandlebar weight:Diameter: 35.5 mmWidth: 17 mmMirror mount:Diameter: 29.8 mmWidth: 12 mmWeight with attachments: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair, includes:2 x handlebar weights2 x clamping sleeves D. 12 mm and D. 16 mm2 x centering sleeves type 1, type 2, type 32 x central bolt black coated M6, lock washer and conical nut M6
HIGHSIDER pro Esagano-LS handlebar weights black (pair)
HIGHSIDER ESAGANO-LS motorcycle handlebar weights Steep and flat trapezoids form the basic shape of the CNC-machined aluminum HIGHSIDER ESAGANO-LS handlebar ends and create a futuristic design that symbolizes the design language of modern motorcycles. A visual highlight is the cover, into which the basic hexagonal shape of our ESAGANO-RS mirror series is CNC-machined. This gives the handlebar ends a closed appearance, free of screw heads. The cover is attached using a grub screw in the non-visible area of the base housing. The ESAGANO-LS handlebar ends are suitable for mounting our comprehensive range of handlebar end mirrors with a stem width of 12 mm. You too can find the perfect mirror for your bike. Our high-quality aluminum sleeve system, which is included in the scope of delivery, allows the handlebar ends to be friction-locked to a variety of handlebars with different inner diameters. Dimensions: Handlebar weight Ø: 40 mm Width: 27 mm Mounting for mirror Ø: 29.90 mm Mounting for mirror width: 12 mm Scope of delivery: 1 pair of handlebar ends incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.