VFR 800 F 2014-2020 (RC79, RC93)
Available categories
Matching articles
Akrapovic Slip-On Line (Titanium) exhaust for Honda VFR800F 2014-2016, VFR800X 2015-2016
Akrapovic Slip-On Line (Titanium) rear silencer with titanium sleeve and carbon end cap, with EU approval; forHondaVFR800F model year 2014-2016VFR800X Crossrunner model year 2015-2016 The Akrapovic Slip-On exhaust system is designed for riders who do not want to make extensive modifications to their standard exhaust system. Nevertheless, Slip-On gives the bike a great look as well as more power. Specifications compared to the series:Power +3.0 kW at 10000 rpmTorque +3.4 Nm at 9350 rpmWeight -2.5 kg
Alurack top case carrier black for Honda VFR 800 F (14-20) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 3.9 kg Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
ARROW exhaust DARK RACE TECH for Honda VFR 800 F (17-)
ARROW DARK RACE TECH rear silencer with black aluminum shell and carbon end cap. With welded-on connecting pipe, with road approval.For Honda VFR800F, type RC93, model year 2017- RACE-TECH mufflers were the first exhaust systems with a diamond or diamond shape and over the years replaced the elliptical shape of Arrow. The new shape made it possible to significantly reduce the dimensions compared to the previous exhaust systems and still keep the cross section the same. This results in a huge weight saving without compromising on volume. The result is a crisp sound and top performance. The rear muffler is artfully finished using the TIG welding process.Features:- Crisp sound and top performance- Diamond shape: significantly reduces the size to the oval exhaust while maintaining the same volume
Basic tank ring for Honda VFR 800 F (14-20) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: Absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism The Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Not suitable for: Street Enduro M, Royster Tankbag, Epic 11, Epic 13, Epic 16 Identical to universal tank ring 516013-5 A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system.
C-Bow side carrier black for Honda VFR 800 F (14-20) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco&Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco&Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 3.1 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
CL Brakes brake pads 1252A3+ sintered metal
A3+ Range Good braking capacity at high energy: power and progressiveness. No fading, minimal loss of efficiency in wet weather. Remarkable lifetime, exceptional in case of heavy and powerful motorcycles.
CL Brakes brake pads 1252C60 sintered metal
C60 Range, for racing use only Very good grip, extremely reactive braking. High performances at low and high temperature. Excellent wear of the disc. Developed with top riders.
CL Brakes brake pads 1252XBK5 sintered metal
XBK5 Range Very high performance sintered metal brake pads designed for supersport bikes. Excellent grip for an extremely reacting braking. High performing braking in dry or wet weather. No fading.
Easyrack top case carrier black for Honda VFR 800 VFR 800 F (14-20) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 4.4 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Gas cap decor with HRC logo original for all Honda models
- Carbon look- HRC logo
HIGHSIDER pro 45 mm headlight Dual-Stream LED black E-approved (1pc)
HIGHSIDER DUAL-STREAM LED headlight, black, E-approved The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing and robust bracket. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoid lens and the shutter technology with which a mechanical shutter switches between high and low beam. By using this modern LED technology, the smallest possible housing dimensions can be achieved with the greatest possible light output. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions:Lens diameter: approx. 45 mmHeight: 70.2 mmWidth: 67 mmDepth: 96.5 mmDistance between mounting holes: 67 mmLateral mounting holes: M 5 mmHousing material: aluminumWeight: 0.230 kg Power consumption:12V / 12W, 739.3 lm, low beam12V / 19 W, 739.3 lm, high beam Connections:Position light = brownLow beam = whiteThe white cable is connected to ignition plus (+) High beam = blueGround = green (-)
HIGHSIDER pro 5 3/4 inch headlight insert type 10 LED E-approved (1pc)
HIGHSIDER 5 3/4 inch LED main headlight insert TYPE 10 with parking light, E-approved Dimensions:Diameter A = 145 mmDiameter GA = 132 mmDiameter I = 125 mmT = 60 mmR = 10 mmCable length: 210 mm Weight: 658 gConnections: (3 pin plug) Red = low beam (+) Yellow = high beam (+) White = position light (+) Brown = earth (-)Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 11 LED black E-approved (1pc)
HIGHSIDER TYPE 11 7-inch LED main headlight insert, E-approved High beam, low beam, parking light and with TFL (daytime running light) function The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic See and be seen! This is extremely important for motorcyclists. On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give your motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, then the LED main headlight is an excellent choice. The built-in LED daytime running light in TYPE 11 is the perfect way to improve visibility during the day. The ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizingly unique look. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight! Dimensions: A diameter = 170 mm GA Diameter = 165 mm I diameter = 160 mm T = 60 mm R = 9 mm Total depth from glass to cooling fins: 96 mm Cable length: 170 mm Connections: Power input: 3 pin connector Black cable = ground (-) White cable = low beam (+) Blue cable = high beam (+) TFL: Black cable = earth (-) Brown cable = daytime running light (+) Gray cable = parking light (+) Scope of delivery: 1 piece
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 3 LED black E-approved
HIGHSIDER LED main headlight insert TYPE 3 This round, chrome-plated reflector with black or chrome-plated cover has a high beam, low beam and parking light function and emits an asymmetrical luminous flux that is only approved for right-hand traffic, E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Red cable = low beam (+), power consumption: at 12 volts 18 watts approx. 1132 lumens. White cable = high beam (+), power consumption: at 12 volts 30 watts approx. 1770 lumens. Brown cable = parking light (+), power consumption: at 12 volts 0.7 watts Scope of delivery: 1 piece Notes: Asymmetrical use, only approved for right-hand traffic.
HIGHSIDER pro 7 inch headlight insert type 4 LED E-approved (1pc)
This round, chrome-plated reflector with clear glass has a high beam, low beam, parking light and daytime running light function. The daytime running light and position light are installed in a central strip, creating a very attractive light pattern - the low beam shines above the strip, while the high beam shines below it. The reflector emits an asymmetrical luminous flux - only approved for right-hand traffic - and is E-approved. Our highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! Dimensions: Diameter A = 177 mm Diameter GA = 168 mm Diameter I = 160 mm T = 61 mm R = 10 mm Connections: Black cable = earth (-) Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W Yellow cable = high beam (+), power consumption at 12V: 1.3A, 13W Black cable = ground (-) TFL: Black cable = ground (-) Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W White cable = position light (+), power consumption at 12V: 0.2A, 2.4W Scope of delivery: 1 piece Note 1: - Asymmetrical use, only approved for right-hand traffic. - The enclosed 3-pin standard plug must be fitted by the customer after the reflector has been installed. View of plug contacts: High beam (yellow) = right Low beam (blue) = top Ground (black) = left Note 2: The daytime running light can also be used on vehicles without a light switch. This requires the following components, for example: Switch: Art. No. 240-044 HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)
HIGHSIDER pro 7 inch headlight insert type 8 LED black E-approved (1pc)
HIGHSIDER LED headlight insert TYPE 8- See and be seen! -Of the utmost importance for motorcyclists. The built-in LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light circuit on the vehicle is provided without additional control boxes or switches, complies with regulations and simplifies installation. Modern LED lighting technology has made huge progress in the headlight sector. An LED bend lighting headlight for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlamp with bend lighting offers clear advantages over a conventional headlamp. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Thanks to the improved illumination, you can see more of the bend and what is behind it. The rider can adjust better to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing, unique look. The headlight is available in black with tinted glass or in chrome with clear glass. The HIGHSIDER LED headlamp with daytime running light, position light and cornering light is of course E-approved. To switch from daytime running light to dipped beam: Press the high beam/flasher button briefly (approx. 1 second) and release the button as soon as the dipped beam is active. The low beam is then permanently active. Sensational - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight!Dimensions:Diameter A = 177.8 mmDiameter GA = 169 mmDiameter I = 166.5 mmT = 59 mmR = 10 mmTotal depth from glass to cooling fins: 99.10 mmConnections:Power input: 3-pin plugRed cable = low beam (+)White cable = high beam (+)Black cable = earth (-)Separate cable (round plug):Red cable = LED position light (+)Scope of delivery: 1 pieceNotes:The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. This resistor prevents the parking light error message.This headlight does NOT work in conjunction with the HIGHSIDER E-BOX TYPE 1 (item number: 208-200)
HIGHSIDER pro Akron grip rubber black 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron Grip Rubber Titanium 7/8 inch (22.2 mm), 132 mm
HIGHSIDER AKRON handlebar grip rubber, black with aluminum ring in various colors - Styling for your bike - The stylish 7/8 inch handlebar grips HIGHSIDER AKRON create a new kind of design language with the overlapping of the two aluminum sleeves. The outer one embodies timeless design with its lines and its trapezoidal tongues form a beautiful contrast to the bead-blasted black aluminum cylinder underneath. The HIGHSIDER lettering is incorporated into the handle structure. The removable end caps allow the mounting of handlebar end indicators, handlebar end mirrors or handlebar weights. The grips give your bike the elegant HIGHSIDER look and enhance its appearance. Our accessory tip: Excellent in combination with the visually coordinated design handlebar weights from our own company. The handlebar ends pick up on the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Suitable for 7/8 inch (22 mm) Length: 132 mm Outer diameter rubber: approx. 34 mm Outer diameter aluminum sleeve: approx. 37 mm Scope of delivery: 1 pair
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.