alpha Technik Drosselkit 25 kW für Honda VT1100C2, SC32
alpha Technik Drosselkit 25 kW für Honda VT1100C2, SC32 Gutachten 25 kW für Honda VT1100C2 Shadow, Fzg.Typ: SC32, ab Modelljahr 1995, ABE-Nr. H027, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: Ansaugblenden Produkt Typ: Drosselkit 25 kW für Honda VT1100C2, SC32 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung auf 25 kW
alpha Technik Drosselkit 25 kW für Honda VT1100C2, SC32
alpha Technik Drosselkit 25 kW für Honda VT1100C2, SC32 "Motorradland" Gutachten 25 kW für Honda VT1100C2 Shadow, Fzg.Typ: SC32, ab Modelljahr 1995, ABE Nr. H027 von 37 kW, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: MOTORRADLAND: Drosselblenden Produkt Typ: Drosselkit 25 kW für Honda VT1100C2, SC32 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung
alpha Technik Koyo wheel bearing 6004-2RS
Koyo wheel bearing 6004-2RS, 1 piece, Made in Japan, deep groove ball bearing sealed on both sides with plastic for various models
alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
BMC Sportluftfilter für Honda VT1100C/C2/C3 Shadow 1987-2007
BMC Sportluftfilter für Honda VT1100C/C2/C3 Shadow 1987-2007 BMC Sportluftfilter für Honda VT1100C Shadow Typ: SC23 (ab Modelljahr 1987-1994) VT1100C2 Shadow A.C.E. (Modelljahr 1995-2007) VT1100C3 Shadow Aero (Modelljahr 1998-2002) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda VT1100C Shadow
Chrome engine guard for Honda VT 1100 C2 Shadow (95-00) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: high-quality metal coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 2.2 kg Color: chrome Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Chrome tubular leather bag holder for Honda VT 1100 C2 Shadow (95-00) Hepco & Becker
The bolted leather bag holders from Hepco&Becker are firmly attached to the motorcycle frame. Many leather panniers from Hepco&Becker fit on this carrier. Mounting of the panniers either via quick-release fastener or by fixed mounting.In the case of fixed mounting, the leather bags are then firmly screwed to the carrier; a fixed mounting kit is automatically included with the leather bag.With the quick-release solution, the leather panniers must be adapted to the specific model, as each model-specific leather pannier holder is shaped differently. The model-specific carriers are solidly developed and offer effective protection for the rider's or pillion rider's legs even in the event of a fall. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Suitable for many Hepco&Becker leather bags Luggage systems generally do not require ABE or registration Recommended payload: 5-7 kg per case (Please note the model-specific information on the respective carrier, as well as the motorcycle manufacturer-specific information) Color: chrome Weight: 2.2 kg Recommendation: Quick-release fastener Self-assembly Item number: 700403 Scope of delivery: Right + left incl. mounting material and instructions Notes: Not suitable for: Buffalo / Buffalo Customivory / Ivory Black
Electrosport regulator - Honda VTC1100C2/C3
ElectroSport regulators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Electrosport Stator - Honda VT1100 Shadow
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA chrome-plated oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*:15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70*Evtl. oEM reference number listed is for comparison purposes only!
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models
ENUMA oil filter for various Bimota / Honda / Kawasaki / Yamaha models OEM reference number*: 15400-PFB-007, 15410-MM5-003, 15410-MM9-003,15410-MM9-013, 15410-MM9-305, 15410-MM9-405, 15410-MM9-P00, 15410-MM9-P01, 15410-MM9-P03, 15410-MT7-003, 15412-MT7-003, 16097-0004, 16097-0008, 16097-0011, 16097-1059, 16097-1061, 16097-1063, 16097-1064, 16097-1066, 16097-1067, 308 49 63, 3FV-13440-00, 3FV-13440-20, 5GH-13440-00, 5GH-13440-10, 5GH-13440-30, 5GH-13440-70 *Evtl. oEM reference number listed is for comparison purposes only!
Gas cap decor with HRC logo original for all Honda models
- Carbon look- HRC logo
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track handlebars steel chrome
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is given in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebar chrome 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebars black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 handlebar black 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Black 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
